CT810
INSTRUCTIONS INSTRUCCIONES
ninjakitchen.com
1-877-646-5288
THANK YOU
for purchasing the Ninja Chef™ Blender
TIP: You can find the model and serial numbers on the QR code label on the back of the motor base.
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device
RECORD THIS INFORMATION
Model Number:
Serial Number:
Date of Purchase (Keep receipt):
Store of Purchase:
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz
Watts: 1500W
PLEASE READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE.
These instructions are designed to help you get a complete understanding of your new Ninja Chef Blender.
If you have any questions, please call our
Customer Service line at 1-877-646-5288.
1 1-877-646-5288
CONTENTS
Important Safety Instructions 3 Getting to Know Your Ninja Chef™ Blender 7 Features 9 Before First Use 10 Using Your 72 oz. Pitcher 11 Using Your Single-Serve Cups 15
Care & Maintenance 19
Cleaning 19 Storing 19 Resetting the Motor Thermostat 19 Ordering Replacement Parts 19
Troubleshooting Guide 20
Warranty 22
ENGLISH
ninjakitch en .com 2
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock, or property damage, basic safety precautions must ALWAYS be followed, including the following numbered warnings and subsequent instructions.
1Read all instructions prior to using the appliance and its accessories.
2Carefully observe and practice all warnings and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
3ALWAYS handle the 72 oz. Pitcher with care when cleaning. Contact with the blade assembly will result in a risk of laceration.
4Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp blades that can cause injury if mishandled.
5Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.
6ALWAYS exercise care when handling the Pro Extractor Blades® Assembly. The blades are sharp. ONLY grasp the Pro Extractor Blades Assembly by the outer perimeter of the blade assembly base.
Failure to use care when handling the blade assembly will result in a risk of laceration.
7Unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.
8To protect against electric shock, DO NOT unplug from electrical outlet while unit is running. Turn the unit off first before unplugging.
9Before first use, wash all parts that may contact food. Follow washing instructions covered in this instruction manual.
10To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.
11DO NOT use this appliance outdoors. It is designed for indoor household use only.
12This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
3 1-877-646-5288
ENGLISH
13DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been
dropped or damaged in any manner. This appliance has important information on the plug prong. The entire cord set is NOT suitable for replacement. If damaged, please contact SharkNinja LLC for service.
14DO NOT use extension cords with this appliance.
15DO NOT allow young children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
16This appliance is not intended to be used by people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17Before each use, inspect blade assemblies for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.
18DO NOT attempt to sharpen blades.
19DO NOT allow the cord to hang over the edge of tables or counters or to contact hot surfaces, including stoves and other heating appliances.
20ALWAYS use the appliance on a dry and level surface.
21Keep hands, hair, and clothing out of the pitcher and Single-Serve Cup when loading and operating.
22ONLY use attachments and accessories that are provided with the product or are recommended by SharkNinja. Use of attachments not recommended or sold by SharkNinja may cause fire, electric shock, or injury.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONS
ninjakitch en .com 4
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock, or property damage, basic safety precautions must ALWAYS be followed, including the following numbered warnings and subsequent instructions.
23During operation and handling of the appliance, avoid contact with moving parts.
24DO NOT operate the appliance with an empty pitcher or cup.
25While blending liquids or ingredients that are frozen, cold, or room temperature, DO NOT fill pitcher past the MAX LIQUID line.
26DO NOT microwave any pitcher or accessories provided with the appliance.
27Before operation, ensure all utensils are removed from pitcher and cup. Failure to remove utensils can cause vessel to shatter and potentially result in personal injury and property damage.
28ALWAYS operate blender with lid and lid cap firmly in place. The lid cap should be removed only when adding ingredients and when using the tamper. NEVER remove the lid cap while blending hot liquids.
29Keep hands and utensils out of pitcher and cup while blending to reduce the risk of severe injury or damage to the blender. While the blender is running, the ONLY utensil that may be used is the included tamper. When the blender is NOT running, then a scraper may be used.
30 DO NOT blend hot ingredients or liquids in the blender cup. Doing so may cause excessive pressure buildup, resulting in the risk of the user being burned. Only the pitcher can be used to blend hot ingredients.
31To avoid risk of scalding from spray or escaping steam, DO NOT blend hot or warm liquids or ingredients beyond the MAX HOT LIQUID fill line. Liquids or
ingredients above the MAX HOT LIQUID fill line need to be at room temperature or colder for processing. ALWAYS blend hot
ingredients or liquids using the Soup mode.
32To avoid the risk of scalding, NEVER operate the appliance without pitcher lid and lid cap in place while blending hot liquids. DO NOT use the tamper while blending hot liquids. Keep hands and exposed skin away from lid cap while blending hot ingredients to prevent possible burns from escaping steam. Failure to keep the lid cap in place while blending hot liquids may result in risk of scalding.
33Handle the pitcher with care when blending hot ingredients, as the lid, lid cap, and sides of pitcher may become hot to touch. When moving the pitcher, use the handle to carry. If needed, hold bottom of pitcher to stabilize.
5 1-877-646-5288
ENGLISH
34If at any time the blender cup becomes warm to the touch, or steams or vents while blending, immediately stop blending ingredients and turn off the unit.
35DO NOT perform grinding operations with the blender cups and Pro Extractor Blades® Assembly.
36Remove the Pro Extractor Blades Assembly from the blender cup upon completion of blending. DO NOT store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if left in
a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Spout Lid to cover.
37NEVER place a blade assembly on the motor base without it first being attached to its corresponding container and lid.
38Flashing light indicates ready to operate. Avoid any contact with blades or moveable parts.
39DO NOT attempt to defeat the interlock mechanism. Ensure the pitcher and lid are properly installed before operation.
40DO NOT expose the pitcher, cup, blade assemblies, and accessories to
extreme temperature changes. They may experience damage.
41NEVER leave the appliance unattended while in use.
42If you find unmixed ingredients sticking to the sides of the pitcher, use the included tamper, with the lid locked on the pitcher, to dislodge ingredients when unit is operating. If not using the tamper, stop the appliance, remove the lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as
you may contact one of the blades and experience a laceration.
43DO NOT attempt to remove the pitcher, pitcher lid, or cup from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing pitcher, pitcher lid, or cup.
44If the appliance overheats, a thermal switch will activate, temporarily disabling the motor, and the control panel will not function when modes are pressed. To reset, unplug the appliance and allow it to cool for approximately 15 minutes before using again.
45The maximum wattage rating for this appliance is based on the configuration of the Bottom Blades and pitcher. Other configurations may draw less power or current.
46DO NOT spray the motor base or screen with water or other liquids.
47Turn off the appliance and unplug the motor base before cleaning.
SAVE THESE INSTRUCTIONS
ninjakitch en .com 6
GETTING TO KNOW YOUR NINJA CHEF™ BLENDER
WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about the great features of your Ninja Chef blender. From assembly to use to maintenance, you will find it all in here.
There are a variety of accessories that are compatible with this blender series.
NOTE: The top flap of your box shows the select accessories that are included with your model.
Visit ninjaaccessories.com to purchase our Single-Serve Cup Kit or the Double-Walled To-Go Tumbler with Spout Lid, so you can blend drinks and take them on the go.
If you have any questions, concerns, or feedback, we would love to hear from you. Give us a call at 1-877-646- 5288 or visit ninjakitchen.com.
*64 oz. max liquid capacity
MAIN UNIT
ALid Cap
BPitcher Lid
C72 oz. Pitcher*
DBottom Blades
EMotor Base
FActivation Dial
GTamper
AVAILABLE ACCESSORIES
H24 oz. Double-Walled To-Go Tumbler
I24 oz. Single-Serve Cup
JSpout Lid
KPro Extractor Blades® Assembly
7 1-877-646-5288
ENGLISH
A
G
B
C
H
D
E 
I J
K
F
ninjakitch en .com 8
FEATURES
IMPORTANT: Review all warnings on pages 3–6 before proceeding.
DID YOU KNOW?
•All containers and lids are BPA free.
•All blades, containers, and lids are dishwasher safe.
*Blend soup in the pitcher from hot ingredients.
MODES: CLEAN
To run the self-cleaning program, first add warm water to the CLEAN line and a couple drops of dishwashing soap to the pitcher. Select CLEAN mode, then press START/STOP to begin. The
unit will shut down when the cleaning cycle is complete. Once complete, thoroughly rinse and air-dry the pitcher.
iQ
These 10 pre-set programs combine a unique set of pulsing, pausing, and blending patterns to take the guesswork out of making meals and drinks. The speed changes and pauses are designed to provide consistent, delicious results every time at the touch of a button.
MANUAL
The activation dial gives you total control over blending speed. By turning the dial while in MANUAL mode, you can vary blending speed from 1 (slowest) to 10 (highest).
TIMER+
Use TIMER+ mode to set a countdown timer. Select TIMER+ and add blend time in 10-second intervals by repeatedly pressing the TIMER+ button. Set the speed by turning the dial to the desired setting. Press START/STOP to activate the unit. Blending will stop automatically when countdown is complete.
PULSE
Select PULSE and turn the dial to the desired speed. Press the START/STOP button in short bursts to pulse. The unit will blend only while the button is pressed.
AUTO-iQ PROGRAMS:
FLOUR/MILL, FROZEN DRINK, EXTRACT, SMOOTHIE, SOUP*, ICE CREAM, PUREE, DIP/SALSA, DRESSING, NUT BUTTER.
9 1-877-646-5288
BEFORE FIRST USE
ENGLISH
1Remove all packaging materials from the unit. Exercise caution when handling the pitcher, as bottom blade assembly is sharp.
2If included with your model, handle the Pro Extractor Blades® Assembly by grasping around the perimeter of the blade assembly base.
3Wash containers, lids, blade assemblies, and tamper in warm, soapy water using a dishwashing utensil with a handle to avoid direct contact with the blades. The pitcher and the Single-Serve Cup can be cleaned automatically by running the self-cleaning cycle (see instructions on page 19). Exercise care when cleaning the blade assemblies, as the blades are sharp.
4Thoroughly rinse and air-dry all parts.
5All attachments are dishwasher safe. It is recommended that the lids and tamper be placed on the top rack of the dishwasher.
6Wipe the motor base with a clean, damp cloth.
ninjakitch en .com 10
USING YOUR 72 OZ. PITCHER
IMPORTANT: Review all warnings on pages 3–6 before proceeding.
IMPORTANT: Hot ingredients are meant only for blending in the pitcher, NOT in the cup.
TIP: To learn more about the unit’s programs, refer to page 9.
TIP: Use the lid cap to easily add oil to emulsify dressings. Add desired measurement of oil to the cap, then pour into the pitcher through the hole in the lid. Replace cap when finished.
1Plug in motor base and place on a clean, dry, level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface. Ensure the motor base is connected to power.
2Lower the pitcher onto the motor base. The pitcher can be installed in two different orientations. The handle can be aligned on either the right side or the front of the motor
base. The pitcher should be oriented so the LOCK symbols are visible on the motor base. Then rotate the pitcher clockwise until it clicks into place.
11 1-877-646-5288
ENGLISH
3Add ingredients to the pitcher, making sure not to exceed the MAX LIQUID line on the side of the pitcher. When
blending any room temperature, cold, or freezing ingredients, such as beverages or smoothies, DO NOT exceed the MAX LIQUID line on the side of the pitcher.
When blending hot ingredients, such as soups and sauces, NEVER exceed the MAX HOT LIQUID line.
4Place lid onto pitcher, then press down firmly, making sure that both side clips on lid fully snap onto lip of pitcher. Insert the lid cap into the lid and turn clockwise to lock. When the unit is connected to power and the pitcher is correctly locked onto the motor base, the unit is ready to be powered on.
ninjakitch en .com 12
USING YOUR 72 OZ. PITCHER - CONT.
IMPORTANT: Review all warnings on pages 3–6 before proceeding.
IMPORTANT: As a safety feature, if the pitcher is not properly installed, a flashing “JAR” message will appear on the control panel. If this happens, repeat step
2 on page 11. When the pitcher is properly installed, the power light will flash and the mode
light will illuminate steadily, indicating the unit is ready for use.
TIP: If unmixed ingredients are sticking to the pitcher, remove lid cap and insert tamper through the hole
in the lid. Use tamper to push ingredients closer to the blades. When used correctly, the tamper will not contact the blades. Remove tamper when finished and replace the lid cap.
NOTE: Press the power button 
to turn the unit on. The button will flash when vessel is assembled and ready to use. Press the power button 
to turn the unit off when finished.
5AUTO-iQ® MODE
To begin, press the 
button. The unit will automatically default to Auto-iQ mode and the power button will flash, indicating the unit is ready to operate. To use an AutoiQ program, turn the dial to your desired program and press START/STOP to begin. The Auto-iQ program will automatically stop when complete.
6MANUAL MODE
To switch to Manual mode, select MANUAL. To choose a blending speed, turn the dial to the desired speed. As you turn the dial, the control panel will display the speed level in the upper left corner. Press START/STOP to begin. During blending, turn the dial clockwise to increase speed and counterclockwise to decrease speed.
If desired, or if ingredients are not blending properly, use the tamper to help push ingredients towards the blades. When ingredients have reached the desired consistency, press the START/STOP button on the dial. Be sure to wait for the unit to come to a complete stop before removing the pitcher from the base or the lid from the pitcher.
13 1-877-646-5288
ENGLISH
7To remove the pitcher from the motor base, turn the pitcher counterclockwise and then lift it off the motor base.
8To remove the lid, pull up one of the side tabs, then lift off the lid. The pitcher can then be emptied.
If hot ingredients were blended, place the pitcher on a flat surface, carefully hold the pitcher handle, and remove the lid. Exercise caution when pouring ingredients to prevent possible burns.
For units that include the Double-Walled To-Go Tumbler, pour your finished blended drink into the cup and twist the Spout Lid onto the cup to take your drink on the go.
9When finished, unplug the unit and release the motor base from the work surface. To release the motor base, place your hands underneath it and gently pull it toward you. Refer to page 19 for storing instructions.
ninjakitch en .com 14
USING YOUR SINGLE-SERVE CUPS
IMPORTANT: Review all warnings on pages 3–6 before proceeding.
WARNING: DO NOT blend hot ingredients in the cup. Doing so may cause excessive pressure buildup, resulting in the risk of the user being burned. Hot blending is meant for the pitcher only.
NOTE: The Single-Serve Cup may not be included with your blender model. Please view the top flap of the box to see which accessories are included with your unit.
To purchase additional accessories, visit ninjaaccessories.com.
1Place the unplugged motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface. Ensure the motor base is connected to power.
2Add ingredients to the Single-Serve Cup. DO NOT add ingredients past the MAX LIQUID line on the cup.
15 1-877-646-5288
ENGLISH
3Place Pro Extractor Blades® Assembly on top of cup and rotate clockwise until sealed tightly.
4Turn the Single-Serve Cup upside down and install onto the motor base. Align the tabs on the cup with the slots on the base, then rotate cup clockwise until it clicks into place.
ninjakitch en .com 16
USING YOUR SINGLE-SERVE CUPS - CONT.
IMPORTANT: Review all warnings on pages 3–6 before proceeding.
IMPORTANT: As a safety feature, the timer will flash “JAR” and the motor will be disabled if the cup is not properly installed. If this happens, repeat step 4 on page 16. When the cup is properly installed, the power light will flash and the mode light will illuminate steadily, indicating the unit is ready for use.
NOTE: Press the power button 
to turn the unit on. The button will flash when vessel is assembled and ready to use. Press the power button 
to turn the unit off when finished.
5AUTO-iQ® MODE
To begin, press the 
button. The unit will automatically default to Auto-iQ mode and the power button will flash, indicating the unit is ready to operate. To use an AutoiQ program, turn the dial to your desired program and press START/STOP to begin. The Auto-iQ program will automatically stop when complete.
6MANUAL MODE
To switch to Manual mode, select MANUAL. To choose a blending speed, turn the dial to the desired speed. As you turn the dial, the control panel will display the speed level in the upper left corner. Press START/STOP to begin. During blending, turn the dial clockwise to increase speed and counterclockwise to decrease speed.
When ingredients have reached the desired consistency, press the START/STOP button on the dial. Be sure to wait for the unit to come to a complete stop before removing the cup from the base.
17 1-877-646-5288
ENGLISH
7To remove the cup from the motor base, turn the cup counterclockwise and then lift it off the motor base.
8Remove the Pro Extractor Blades® Assembly by twisting it counterclockwise. Exercise care when handling the blade assembly, as the blades are sharp. DO NOT store blended contents with the Pro Extractor Blades Assembly attached.
9To enjoy your drink on the go, place the Spout Lid onto the Single-Serve Cup and twist clockwise until firmly sealed. For storage in the cup, use only Spout Lid to cover.
10Unplug the appliance when finished and release the motor base from the work surface. To release the motor base, place your hands underneath it and gently pull it toward you. Refer to page 19 for storing instructions.
ninjakitch en .com 18
CARE & MAINTENANCE
CLEANING
1Separate all parts.
2Hand-Washing
Wash containers, blade assemblies, lids, and tamper in warm, soapy water, using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when washing Pro-Extractor Blades® Assembly and pitcher, as the blade assemblies are sharp. Thoroughly rinse and air-dry all parts.
Dishwasher
The tamper and all containers, lids, and blade assemblies are dishwasher safe. It is recommended that the tamper and lids be placed on the top rack of the dishwasher. Exercise care when handling pitcher and Pro Extractor Blades assembly, as the blade assemblies are sharp.
Using Clean Mode
To run the self-cleaning program with the pitcher, first add warm water to the MAX CLEAN line and a couple drops of dishwashing soap to the pitcher. Secure the pitcher lid and lid cap in place. Select
CLEAN mode, then press START/STOP to begin. The unit will shut down when the selfcleaning cycle is complete. Make sure to thoroughly rinse and air-dry the pitcher.
When using CLEAN mode for the blender cup, fill the cup halfway with warm water and add one drop of dishwashing soap.
Motor Base
Turn off the unit and unplug the motor base before cleaning. Wipe motor base with a clean, damp cloth.
Clean the control panel with a soft cloth, such as microfiber, to prevent scratching. To remove residue from the control panel, you may use an all-purpose cleaner.
NEVER directly spray the base or control panel with water or other liquids.
DO NOT use abrasive cloths/pads/brushes to clean the base or control panel, as this can dull or scratch the surface.
STORING
Store the unit upright with the lid on the pitcher.
DO NOT store blended or unblended ingredients in the Single-Serve Cup with the Pro Extractor Blades assembly attached.
DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload the
unit. If the unit is overloaded, the motor will be temporarily disabled, and the control panel will not function when modes are pressed. Should this occur, follow the reset procedure below.
1Unplug the unit from the electrical outlet.
2Allow the unit to cool for approximately 15 minutes.
3Remove the pitcher lid. Empty the pitcher and ensure no ingredients are jamming the blade assembly.
4Return the pitcher to the motor base.
IMPORTANT: Ensure that maximum capacities are not exceeded. This is the most typical cause of appliance overload.
If your unit needs servicing, please call Customer Service at 1-877-646-5288.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit ninjaaccessories.com or contact Customer Service at 1-877-646-5288.
19 1-877-646-5288
TROUBLESHOOTING
GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn off power and unplug unit before troubleshooting.
Motor does not start or blade assembly does not rotate.
•Make sure the pitcher or blender cup is securely placed on motor base. If “JAR” message appears on control panel, the pitcher or cup is not installed correctly.
•The unit is turned off. Press the power button (
) to turn on.
•Check that the plug is securely inserted into the electrical outlet.
•Check the fuse or circuit breaker.
•The unit may have overloaded or overheated. The unit will stop and the control panel will not
function when modes are pressed. Unplug and wait approximately 15 minutes before using again.
Food is chopped too fine or is too watery.
• The food has been over-processed. Use PULSE mode for controlled processing.
Food collects on lid or on the sides of the pitcher.
•The mixture is too thick. Add more liquid or use the tamper to help push the ingredients toward the blades.
You cannot create snow from solid ice.
•DO NOT use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
•Start with a few pulses and then go to a continuous blending cycle.
•For best results, use the tamper to push the ice down toward the blades.
Motor base won’t stick to counter or tabletop.
•Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as wood, tile, and non-polished finishes.
•DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure (cutting board, platter, plates, etc.)
You get a blinking “JAR” message.
•The container is not installed properly. For your safety, the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this instruction manual for assistance.
Why can’t I run the CLEAN program twice?
•CLEAN mode is intended to be used as a single cycle. The unit will lock the user out from running back-to-back CLEAN mode cycles. If container is not completely clean after the CLEAN cycle is complete, please follow hand-washing or dishwasher instructions above.
ENGLISH
ninjakitch en .com 20
Loading...