Intelli-Sense™
Kitchen System
CT680
INSTRUCTIONS
ninjakitchen.com
1-877-646-5288
THANK YOU
for purchasing the Ninja® Intelli-Sense™ Kitchen System
TIP: You can find the model and serial numbers on the QR code label located near the rating label.
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device
RECORD THIS INFORMATION
Model Number:
Serial Number:
Date of Purchase (Keep receipt):
Store of Purchase:
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz
Watts: 1200W
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
These instructions are designed to help you get a complete understanding of your new Ninja Intelli-Sense Kitchen System.
If you have any questions, please call our Customer Service line at 1-877-646-5288.
CONTENTS
Important Safety Instructions 3
Getting to Know Your Ninja®
Intelli-Sense™ Kitchen System 7
Before First Use 9
Features 10
Total Crushing® Pitcher 10 Single-Serve Cup 11 Precision Processor™ Bowl 12
Using Your Total Crushing Pitcher 13 Using Your Single-Serve Cup 17 Using Your Precision Processor Bowl 21
Care & Maintenance 25
Cleaning 25 Storing 25 Resetting the Motor Thermostat 25 Ordering Replacement Parts 25
Troubleshooting Guide 26
Warranty 30
1 |
1-877-646-5288 |
|
ninjakitch e n .com |
2 |
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be followed, including the following:
1Read all instructions prior to using the appliance and its accessories.
2Carefully observe and follow all warnings and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
3This product is provided with a Stacked Blade Assembly and a Chopping Blade Assembly. Always exercise care when handling blade assemblies. The blade assemblies are sharp and are NOT locked in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.
4ALWAYS exercise care when handling the Pro Extractor Blades® Assembly. The blades are sharp. ONLY grasp the Pro Extractor Blades Assembly by the outer perimeter of the blade assembly base.
Failure to use care when handling the blade assembly will result in a risk of laceration.
5Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.
6Take inventory of all contents to ensure that you have all parts needed to properly and safely operate your appliance.
7Unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.
8Before use, wash all parts that may contact food. Follow washing instructions covered in this instruction manual.
9To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.
10DO NOT use this appliance outdoors. It is designed for indoor household use only.
11This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
12DO NOT operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.
13This appliance has important information on the plug prong. The power cord is not suitable for replacement. If damaged, contact SharkNinja for servicing in order to avoid a hazard.
14Extension cords should NOT be used with this appliance.
15DO NOT allow young children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
16This appliance is NOT intended to be used by people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17Before each use, inspect blade assemblies for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.
18DO NOT attempt to sharpen blades.
19DO NOT allow the unit or the cord to hang over the edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.
20DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
21ALWAYS use the appliance on a dry and level surface.
22NEVER place a blade assembly on the motor base without it first being attached to its corresponding container (bowl, pitcher, cup) and lid.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONS
3 |
1-877-646-5288 |
|
ninjakitch e n .com |
4 |
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be followed, including the following:
23Keep hands, hair, and clothing out of the container.
24ONLY use attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments not recommended or sold by SharkNinja may cause fire, electric shock or injury.
25During operation and handling of the appliance, avoid contact with moving parts.
26DO NOT operate the appliance with an empty container.
27DO NOT fill containers past the MAX FILL or MAX LIQUID lines.
28DO NOT microwave any containers or accessories provided with the appliance.
29DO NOT perform grinding operations with the Single-Serve Cup and Pro Extractor Blades® Assembly.
30Before operation, ensure that all utensils are removed from containers. Failure to remove utensils can cause containers to shatter and potentially result in personal injury and property damage.
31Keep hands and utensils out of containers while chopping to reduce the risk of severe personal injury or damage to the blender/ food chopper. A scraper may ONLY
be used when the food chopper is not running. When using the chopper, always use food pusher to add food. NEVER add food by hand.
32NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure that the container and lid are properly installed before operation.
33DO NOT expose the containers and accessories to extreme temperature changes. They may experience damage.
34NEVER leave the appliance unattended while in use.
35DO NOT open lid or pour spout cap while blender is operating.
36DO NOT blend hot liquids. Doing so may result in pressure buildup and steam exposure that can pose a risk of the user being burned.
37If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may contact one of the blades and experience a laceration.
38DO NOT attempt to remove the container and lids from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing lids and containers.
39Upon completion of processing, ensure that the blade assembly is removed BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the container. Failure to remove the blade assembly before emptying the container results in a risk of laceration.
40Remove the Pro Extractor Blades® Assembly from the Single-Serve Cup upon completion of blending. DO NOT store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if left in
a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Spout Lid to cover.
41If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, unplug the appliance
and allow it to cool for approximately 15 minutes before using again.
42The maximum wattage rating for this appliance is based on the configuration of the Pro Extractor Blades Assembly and Single-Serve Cup. Other configurations may draw less power or current.
43DO NOT process dry ingredients without adding liquid to the Single-Serve Cup. The Single-Serve Cup is not intended for dry blending.
44DO NOT submerge the motor base or touchscreen in water or other liquids. DO NOT spray the motor base or touchscreen with any liquids. Turn off and unplug the motor base before cleaning.
SAVE THESE INSTRUCTIONS
5 |
1-877-646-5288 |
|
ninjakitch e n .com |
6 |
GETTING TO KNOW YOUR NINJA® INTELLI-SENSE™ KITCHEN SYSTEM
WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about the great features of your Intelli-Sense™ Kitchen
System. From assembly to use to maintenance, you will find it all in here.
There are a variety of accessories that are compatible with this blender series.
NOTE: The top flap of your box shows the select accessories that are included with your model.
If you have any questions, concerns or feedback, we’d love to hear from you. Give us a call at 1-877-646-5288 or visit ninjakitchen.com
*64 oz. max liquid capacity.
MAIN UNIT
APitcher Lid
B72 oz. Total Crushing® Pitcher*
CStacked Blade Assembly
DMotor Base with Smart Vessel Recognition
EPrecision Processor Bowl Lid
FDough Blade Assembly
GChopping Blade Assembly
HPrecision Processor™ Bowl**
I24 oz. Single-Serve Cup
JSpout Lid
KPro Extractor Blades® Assembly
E
A
F G
B
C H
D
I J 
K
7 |
1-877-646-5288 |
|
ninjakitch e n .com |
8 |
BEFORE FIRST USE
IMPORTANT: Review all warnings on pages 3–6 before proceeding.
DID YOU KNOW?
•You can take your drinks on the go using the Spout Lids.
•All containers, blade assemblies, and lids are BPA free and dishwasher safe.
1Remove all packaging materials from the appliance. Exercise care when unpacking blade assemblies. All blade assemblies are sharp.
2The Chopping Blade Assembly and Stacked Blade Assembly are NOT locked in place in their containers. Handle the Chopping Blade Assembly and Stacked Blade Assembly by grasping the top of the shaft.
3Handle the Pro Extractor Blades® Assembly by grasping around the perimeter of the blade assembly base.
4Wash containers, lids, and blade assemblies in warm, soapy, water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp.
5Thoroughly rinse and air-dry all parts.
6All attachments are dishwasher safe. It is recommended that the lids, containers, and blade assemblies be placed on the top rack of the dishwasher. Ensure blade assemblies and lids are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies.
7Wipe touchscreen with a soft cloth. Allow it to dry completely before using.
FEATURES
SMART PROGRAMS FOR THE TOTAL CRUSHING® PITCHER
Intelligent pre-set programs that combine unique blending and pausing patterns that do the work for you. Once a pre-set program is selected, it will start immediately. Press STOP to end it.
The power symbol should be used to turn your appliance on or off.
SMOOTHIE
Make super-smooth, sippable drinks and shakes from fresh or frozen fruit, milk, liquids, and ice.
ICE CREAM
Create delicious and scoop-able frozen desserts like ice cream or sorbet.
FROZEN DRINK
Turn ice, juices, and fruit into expertly blended frozen drinks.
SNOW CONE
Pulverize ice into frozen creations like snow cones, slushies, or granitas.
LOW, HIGH, and PULSE
When selected, each of these programs runs continuously until turned off. They do not work in conjunction with any pre-set programs.
9 |
1-877-646-5288 |
|
ninjakitch e n .com |
10 |
Loading...