IMPORTANT: For your own safety and that of others, please
make certain that everyone who uses the 30CA COMPACT I high
pressure washer reads and understands these instructions
thoroughly prior to operation.
Owner’s manual
11
18
17
16
10
9
8
7
1
15
14
13
6
5
19
12
20
2
3
4
We congratulate you on your
choice of the new ALTO 30CA!
We are convinced that this high pressure
washer will meet your requirements. It’s easy
to operate and versatile.
It’s important that you read this Owner’s
Manual thoroughly before you start up
your ALTO pressure washer for the first
time. Follow the instructions in this
manual carefully, and you’ll obtain full and
lasting benefit from your high pressure
washer.
Contents
1.0 Technical data ............................................. 3
2.0 Instructions for use .................................... 3
A concern for the environment is a natural part of
our philosophy at ALTO.
In every area of the company we work diligently to
reduce or eliminate harmful effects on our environment. This concern is also reflected in the design of
individual ALTO high pressure washers, including
the 30CA.
Years from now, when it’s time to retire this machine, you’ll find that nearly every plastic component is recyclable and marked with the appropriate
material recycling symbol.
> PP <
Have a good time with your new ALTO pressure
washer!
Sincerely,
The employees and management,
ALTO Danmark A/S
2
1.0 Technical data
Type/ModelP478/
Pump pressurePsi
Water volume, at min-max pressureGpm
Self-priming liftFt
MotorHp
Double Spray Lance:
Spray angle h.p./l.p.degrees
Nozzle size
Sound level (ISO 3746)dB(A)
Specifications at 45 psi inlet pressure and 54°F inlet water.
Specifications subject to change without notice.
2.0 Instructions for use
Before starting your high pressure washer, read through sections:
2.0 Instructions for use, and 3.0 Operating instructions.
Follow the instructions carefully to ensure the protection of the user, the surroundings and the machine.
Risk of Injection or Injury -
Do Not Direct Discharge Stream At Persons.
The high water pressure from a high pressure washer may cause personal injury or property damage if the
following „IMPORTANT SAFETY INSTRUCTIONS“ are not strictly observed.
30CA Compact I
21751230
2.4 / 2.319.5/1.8
33
3.01.6
15/6515/65
0303
8383
Safety precautions and warnings
- WARNING -
(240V)30CA Compact I (115V)
IMPORTANT SAFETY INSTRUCTIONS
- WARNING -
When using this product, basic precautions should always be followed, including the following:
1. Read all of the instructions before using the product.
2. To reduce the risk of injury, close supervision is necessary when the pressure washer is used near
children.
3. Know how to stop the product. Be thoroughly familiar with all controls.
4. Stay alert - watch what you are doing.
5. Do not operate the product when fatigued or under the influence of alcohol or drugs.
6. Keep the operating area clear of all persons.
7. Do not over-reach or stand on unstable support. Keep good footing and balance at all times.
8. Follow the maintenance instructions specified in the manual.
9. Read this manual carefully - know your equipment. Consider the applications, limitations, and the potential
hazards specific to this unit.
10. Do not touch the cord, plug or outlet with wet hands.
11. Avoid accidental starts. Always connect to electric outlets with the motor „off“.
12. Water stream must never be directed towards any electric wiring or fatal electric
shock may occur.
13. Never direct water stream towards people or pets.
14. Never carry your pressure washer by the power cord, or yank on the cord to disconnect from outlet.
15. To prevent damage, the power cord should not be crushed, placed next to sharp edges nor near
hot objects.
3
Safety precautions and warnings
16.Check all electric cords prior to use. Damaged cords should not be used.
17. Never let children operate your pressure washer.
18. Hold the spray lance with both hands to maintain complete control.
19. Don’t touch the nozzle while spraying, or the water stream at any time.
20. Wear eye protection while operating. The operator and others in the vicinity of the cleaning site
should take action to protect themselves from being struck by dislodged debris during cleaning
operations.
21. Disconnect power plug from the outlet when not in use and prior to detaching the nozzle/spray lance.
22. Only ALTO spare parts, ALTO accessories and ALTO nozzles should be used.
23. Never start the machine if ice has formed in any part of the equipment. Thaw out any ice before starting.
24. The machine is designed to use „consumer“ strength detergents, degreasers and waxes. The use of
„Industrial“ solutions may affect its operation and safety. Carefully observe all detergentinstructions
before using.
25. Never use the pressure washer in environments where risk of explosion is present (ie. gas vapors).
26. All electrical connections should be kept dry and off the ground.
27. Do not use the machine to clean surfaces containing asbestos.
28. If it is necessary to replace the power cord, it must be done by a ALTO service technician.
29. Faulty electrical connection of the pressure washer can cause fatalities. Never modify or alter the
plug on the power cord of your pressure washer. If it doesn’t fit the outlet and adjustments are
required, call a qualified electrician.
30. Some models are provided with a Ground Fault Circuit Interrupter (GFCI) built into the power cord
plug. If replacement of the plug or cord is needed, use only identical replacement parts.
31. Don’t use the machine if the power cord or other important parts of the equipment are damaged
- i.e. safety devices, high pressure hoses, spray handles, cabinet.
32. The most efficient cleaning is obtained if you adjust the distance to the surface which is to be
cleaned. Thus you will also avoid damaging the surface.
SAVE THESE INSTRUCTIONS
2.1 Unpacking
Once the pressure washer has been taken out of the packaging, check that it is complete and without any
defects; if in doubt, the pressure washer should not be put into use and you should contact the nearest
ALTO service organization.
2.2 Startup
- Check power cord
Power cord insulation must be perfect. (No cracks, cuts or other defect).
Contact a qualified electrician or a ALTO distributor if there is any doubt.
- Check voltage
Connect the pressure washer to a grounded outlet of the correct voltage (see Data Plate).
- Fuse/Breaker
Be certain that your electrical outlet is adequately fused for the machine’s requirements (see Data
Plate).
- Reset the Ground Fault Circuit Interrupter (GFCI) (if equipped)
AFTER the power cord is plugged in, press the RESET button on the GFCI.
If it will not reset, contact a ALTO service center for assistance.
If these instructions aren’t followed, it may be
dangerous to use your pressure washer.
4
- WARNING -
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.