Nikon COOLPIX 995 Guide
Windows XP Home Edition / Windows XP Professional
COOLPIX5000/995/885/775
This manual is for those users of the COOLPIX5000/995/885/
775 who are running Nikon View 4 (Version4.3.1) under
Windows XP Home Edition / Professional.
Using Nikon View 4 with Windows XP Home Edition / Windows XP Professional
COOLPIX5000/995/885/775
Installing Nikon View 4
Follow the installer instructions to install Nikon View 4 .
Device Registration
The camera must be registered as a hardware device when it is connected
to the computer for the first time.
Windows XP will automatically register the COOLPIX5000/995/885/775.
When the Removable Disk (Autoplay) window, or the Nikon View 4 Image
Transfer window appears automatically on the screen, registration has
been completed. Follow the steps below to confirm that the camera is
correctly registered with Windows.
Step 1
Select Control Panel from the Start menu to display the window shown
below. Click Performance and Maintenance.
Step 2
Click System to open the System Properties window.
Step 3
Select the Hardware tab and click the Device Manager button.
Log On
You will need to log on as the “Computer Administrator” when installing,
uninstalling and using Nikon View 4.
Using Nikon View 4 with Windows XP Home Edition / Windows XP Professional (COOLPIX5000/995/885/775)
xp-1
Step 4
The Device Manager will be displayed. After confirming that “Universal
Serial Bus controllers,” “Disk drives,” and “Storage volumes” are listed in
the Device Manager, click the “+” sign next to each of these device types.
Step 5
After confirming that “USB Mass Storage Device,” “Nikon Digital Camera
USB Device,” and “Generic volume” are listed respectively under “Universal Serial Bus controllers,” “Disk drives,” and “Storage volumes,” double
click each of these listings to open the associated Properties window.
Step 6
Click the General tab for each device and confirm that “This device is
working properly” appears under “Device status”. Click OK.
If instead the listing “NIKON DSC E5000
(995/885/775)” appears under “Other
Devices”, delete this listing and turn the
camera off and then on again. The required
device drivers will be installed automatically.
Using Nikon View 4 with Windows XP Home Edition / Windows XP Professional (COOLPIX5000/995/885/775)
Close the Device Manager, then click OK to close the System Properties
window. Device registration is now complete.
xp-2
Loading...