Netgear GS308 Quick Start Manual

Gigabit Ethernet Switch GS308

Installation Guide

Step 1. Connect equipment

tep 1. Connect equipment

Computer Server

GS308

Optional router

Internet

Optional modem

Step 2. Connect power Step 3. Check status

Power LED

Off

Port LEDs

Ethernet link

Activity (blinking)

No link (off)

Specifications Description

Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or

1000BASE-T Network cable Category 5 (Cat 5) or better Ethernet cable Ports 8 Power adapter 12V @ 1.0A DC input Power consumption 3.8W max Weight 0.40 Kg (0.88 lbs) Dimensions

(W x D x H) Operating temperature 0°–40° C (32°–104° F)

Operating humidity 10%–90% relative humidity, noncondensing Certifications CE mark, CB, CE Class B, C-Tick Class B

158 mm x 102 mm x 26 mm

(6.22 in. x 4.02 in. x 1.02 in.)

January 2013

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Technical Support

Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label

of your product and use it to register your product at

https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR web site. For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support resources.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © NETGEAR, Inc. All rights reserved.

Intended for indoor use only in all EU member states, EFTA states, and Switzerland.