NETGEAR GS305v3 Installation Manual

1. Register with the NETGEAR Insight app

2. Connect the switch

Installation Guide

5-Port and 8-Port Gigabit Ethernet Unmanaged Switch

Model GS305v3 and GS308v3

Use the NETGEAR Insight App to register your switch, activate your warranty, and access support.

1. On your iOS or Android mobile device, visit the app store, search for NETGEAR Insight, and download the latest app.

2. Open the NETGEAR Insight app.

3. If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.

4. Tap the menu in the upper left corner to open it.

5. Tap REGISTER ANY NETGEAR DEVICE.

6. Enter the serial number located on the bottom of the switch, or use the camera on your mobile device or tablet to scan the serial number bar code.

7. Tap Go.

8. Tap View Device to add the switch to a network.

The switch is registered and added to your account. You can now view your switch in the NETGEAR Insight app.

Note: Because this is an unmanaged switch, you cannot congure or manage it

in NETGEAR Insight.

Sample connections

Internet

Router

In the Sample connections diagram, the entire network is deployed indoors.

If you want to connect an outdoor device to the switch, cable the switch to an Ethernet surge protector that supports the same speeds as your switch, and then cable the surge protector to the outdoor device.

Do not use this switch outdoors. Before connecting this switch to outdoor cables or devices, see https://kb.netgear.com/000057103 for safety and warranty information.

GS305v3

Access Point

3. Power on the switch

• For switch model GS308v3 only, move the Off/On switch to the On position.

• Connect the power adapter to the switch and plug it into an electrical outlet.

Package contents

• Switch

• Power adapter (varies by region)

• Installation guide

Ethernet cables are not included.

The LEDs indicate the status.

LED Description

Power • On. The switch is receiving power.

• Off. The switch is not receiving power.

Por t • Solid green. The switch detected a link with a powered on

device on this port.

• Blinking green. The port is sending or receiving trafc.

• Off. The switch does not detect a link on this port.

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return

the device to your place of purchase within your return period.

April 2020

NETGEAR, Inc.

350 East Plumeria Drive San Jose, CA 95134, USA

NETGEAR INTL LTD

Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland