NETGEAR GS108PEv3 User Manual

Installation

ProSAFE Plus 8-Port Gigabit Switch with
4-Port PoE

GS108PEv3

Step 1. Connect the equipment.

IP Phone Server

Internet

Optional modem

Step 2. Connect to power. Step 3. Check the status.

Power LED Right PoE LEDs (Ports 1–4) Le Port LEDs (Ports 1–8)

On PoE in use 1000 Mbps

link

O PoE halted 10/100 Mbps

No PoE use (o )

Activity
(blinking)

No link (o )

PoE Max. LED

Less than 7W of PoE power is available.

GS108PEv3 Optional router

PoE Max. LED was activated in the previous two minutes
(blinking).

PoE ports are working normally (o ).

Set Up the Switch Confi guration Utility

Specifi cations

Support

Plus switches are plug and play. You can install a confi guration utility to
select additional options to manage and customize the switch for your
network. This utility is on the resource CD that was shipped with the switch.

Note: The confi guration utility is installed on your computer and is supported only

on Windows.

 To install the confi guration utility:

1. Insert the resource CD into a computer that is connected to the switch.

2. Click the Install ProSAFE Plus Utility link and follow the prompts to

install the program.
The switch confi guration utility is installed in the program directory of

your computer and a ProSAFE Plus Utility icon is placed on your desktop.

 To confi gure the switch:

1. Double-click the ProSAFE Plus Utility icon.

The confi guration home screen displays a list of plus switches that it
discovers on the local network.

2. Select the switch that you want to confi gure.
You are asked to enter the password for the switch.

3. Enter the switch’s password in the password fi eld.
The switch’s default password is password.

Specifi cation Description

Network interface RJ-45 connector for 10BASE-T,

100BASE-TX, or 1000BASE-T

Network cable Category 5e (Cat 5e) or better Ethernet

cable

Ports 8

Power adapter 48V @ 1.25 A DC input

Power consumption 60W max.

PoE power budget 53W max. all PoE ports (1–4), 15.4W max.

per PoE port

Weight 0.538 kg (1.19 lb)

Dimensions (W x D x H) 158 mm x 101 mm x 29 mm

6.2 in. x 4 in. x 1.14 in.

Operating temperature 0–40°C (32–104°F)

Operating humidity 10%–90% relative humidity,

noncondensing

Electromagnetic compliance CE Class A, FCC 15 Class A, VCCI Class A,

RCM Class A, EAC, KCC, CCC

Safety agency approvals CE mark, CB, CCC, EAC

Thank you for selecting NETGEAR products.

A er installing your device, locate the serial number on the label of your
product and use it to register your product at

https://my.netgear.com.

You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website. For product updates and web support, visit

http://support.netgear.com.

NETGEAR recommends that you use only the o cial NETGEAR support
resources.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

4. Use the utility to confi gure the switch.
For a description of Plus features, see the ProSAFE Plus Switch

Confi guration Utility User Guide. You can access the user guide through
links on the Help tab of the utility or on the resource CD.

Note: You can also access and confi gure the switch directly through its web-based

user interface.

May 2014

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.