NETGEAR GS108GE User Manual [nl]

Technical Support

Please refer to the Support Information card that shipped with your product.

By registering your product at www.NETGEAR.com/register, we can provide you with faster
expert technical support and timely notices of product and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only) - 24x7 phone support
For other countries see your Support Information card.
E-mail: [e-mail] (24x7 online support)
Website: www.NETGEAR.com

©2006 NETGEAR, Inc. NETGEAR, the Netgear logo, ProSafe, The Gear Guy and Everybody's Connecting are
trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and
Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand
and product names are trademarks or registered trademarks of their respective holders. Information is subject to change
without notice. All rights reserved.

February 2006

201-10818-01

ProSafe 8 Port Gigabit Switch

10/100/1000 Mbps GS108A

Installation Guide

Introduction

The NETGEAR®ProSafe 8-Port Gigabit Ethernet Switch Model GS108A provides you with a
low-cost, reliable, high-performance switch to connect up to eight different Ethernet-enabled
devices (such as computers, file servers and routers) at blazing Gigabit Ethernet speeds.

10/100/1000 M

bps G

igabit Sw

itch

G

10

M

1

2

3

Pw

r

G

re

e

n

S108

: O

n

4

=

FD

1000M 100M

=

Lin

k

, B

lin

k

=

A

ct

5

6

7

8

X

, Y

ello

w

=

C

o

llision

1

2

3

4

5

6

O

n

=

7

Lin

k, B

lin

8

k=

A

ct

Model GS108A

ProSafe 8-Port

The GS108A Gigabit Ethernet Switch enables you to build a small network that gives you 10,
100, or 1000 Mbps access to other devices on the network. It provides a full, dedicated 1000
(or 100, or 10 Mbps) connection between two devices. If a device has full-duplex capability,
the GS108A switch provides a 2000 Mbps (or 200, or 20 Mbps) connection. If your network
is configured to support Jumbo Frames, the GS108A will forward them, as well as honoring
priority tags at both the layer 2 and layer 3 level. This means the GS108A can instantly move
even very large files across your network. As an added benefit, this switch works with both
Windows and Macintosh computers.

Ethernet cables come as either straight-through or crossover cables—depending on whether
you’re connecting to a device (computer, server, or printer) or networking equipment (hub,
switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one
you use. Each port on the GS108A switch automatically configures itself correctly when you
plug in a device’s cable.

If you have a problem with your switch, NETGEAR offers technical support 24 hours a day
and 7 days a week on the Web (www.NETGEAR.com), by e-mail ([e-mail])
and by phone (see the provided support information card for phone numbers).

Installation Overview

Estimated Time: 5–10 minutes

1. Unpack the box and verify the contents.

2. Prepare to install the switch.

3. Install the switch and connect the other devices.