NETGEAR GS108 User Manual
Technical Support
Please refer to the Support Information card that shipped with your product.
By registering your product at www.NETGEAR.com/register, we can provide you with faster
expert technical support and timely notices of product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only)
For other countries see your Support Information card.
E-mail: Support@NETGEAR.com
Website: www.NETGEAR.com
© 2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or
other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
M-GS108NA-0
8-Port Switch
10/100/1000 Mbps Gigabit Ethernet GS108
Installation Guide
Introduction
The NETGEAR®8-Port Gigabit Ethernet Switch Model GS108 provides you with a low-cost,
reliable, high-performance switch to connect up to eight different Ethernet-enabled devices (such as
computers, file servers and routers) at blazing Gigabit Ethernet speeds.
The GS108 Gigabit Ethernet Switch enables you to build a small network that gives you 10,
100, or 1000 Mbps access to other devices on the network. It provides a full, dedicated 1000
(or 100, or 10 Mbps) connection between two devices. If a device has full-duplex capability,
the GS108 switch provides a 2000 Mbps (or 200, or 20 Mbps) connection. This means the
GS108 can instantly move even very large files across your network. As an added benefit, this
switch works with both Windows and Macintosh computers.
Ethernet cables come as either straight-through or crossover cables—depending on whether
you’re connecting to a device (computer, server, or printer) or networking equipment (hub,
switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one
you use. Each port on the GS108 switch automatically configures itself correctly when you
plug in a device’s cable.
If you have a problem with your switch, NETGEAR offers technical support 24 hours a day
and 7 days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com)
and by phone (see the provided support information card for phone numbers).
Installation Overview
Estimated Time: 5–10 minutes
1. Unpack the box and verify the contents.
2. Prepare to install the switch.
3. Install the switch and connect the other devices.
Loading...