Netgear GS105V5, GS108V4 User Manual

1. Register with the NETGEAR Insight app

Installation Guide

5-Port and 8-Port
Gigabit Ethernet
Unmanaged Switch
GS105v5 and GS108v4

Package contents

• Gigabit Ethernet switch

1. Search for NETGEAR Insight and download the latest app.

2. Set up a NETGEAR account if you do not have one.

3. Tap the menu in the upper-left corner.

4. Tap REGISTER ANY NETGEAR DEVICE.

5. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device to scan the serial number bar code.

6. Tap GO.

The switch is registered and added to your account. You can now view the
switch in the NETGEAR Insight app.

Note: Because this is an unmanaged switch, you cannot configure or manage

it in NETGEAR Insight.

2. Connect the switch

GS108v4

Access
point

Router

Desktop

Internet

ReadyNAS

• Power adapter (varies by region)

• Wall-mount kit

• Installation guide

July 2019

Smart TV

Sample connections

3. Check the LEDs

LED Description

Power

Port
(left and right)

• On. The switch is receiving power.

• Off. The switch is not receiving power.

• Both LEDs are solid green. 1000 Mbps link on this port.

• Left LED is solid green. 100 Mbps link on this port.

• Right LED is solid green. 10 Mbps link on this port.

• Blinking green. The port is sending or receiving trafc.

• Off. The switch does not detect a link on this port.

Gaming
console

Wall-mount the switch

Support

The bottom panel of the switch includes two mount holes. The center-to-center
distance beween the holes is:

• GS105v5: 1.8 in (46 mm)

• GS108v4: 3.15 in (80 mm)

Note: You can mount the switch with the

Ethernet ports facing down (at the bottom) as
shown, or with the Ethernet ports facing up.

1. Mark the wall where you want to drill the holes.

2. Insert the provided anchors into the wall.

3. Install the provided screws with a No. 2 Phillips screwdriver.

Leave about ¼ inch (6 mm) of each screw protruding from the wall.

4. Align the holes on the bottom panel of the switch with the screws and mount the
switch.

Technical specications

Specications Description

Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T

Ports GS105v5: 5

GS108v4: 8

Power adapter 12V @ 0.5A DC input

Power consumption

Weight GS105v5: 0.56 lb (0.254 kg)

Dimensions (W x D x H) GS105v5: 3.97 x 3.7 x 1.02 in. (100.8 x 94 x 25.9 mm)

Operating temperature 32–122° F (0–50° C)

GS105v5: 2.7W max.

GS108v4: 4.92W max.

GS108v4: 1.11 lb (0.5 kg)

GS108v4: 6.2 x 4 x 1.1 in. (158 x 102 x 27 mm)

Thank you for purchasing this
NETGEAR product. You can visit

https://www.netgear.com/support/

to register your product, get help,
access the latest downloads and user
manuals, and join our community. We

recommend that you use only ofcial

NETGEAR support resources.

Si ce produit est vendu au Canada,
vous pouvez accéder à ce document
en français canadien à https://www.

netgear.com/support/download/.

(If this product is sold in Canada, you
can access this document in Canadian
French at https://www.netgear.com/

support/download/.)

For regulatory compliance information
including the EU Declaration of
Conformity, visit https://www.netgear.

com/about/regulatory/.

See the regulatory compliance
document before connecting the
power supply.

Do not use this device outdoors. If
you connect cables or devices that are
outdoors to this device, see

https://kb.netgear.com/000057103 for

safety and warranty information.

NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland

© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference
purposes only.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA

Operating humidity 10%–90% relative humidity, noncondensing