Netgear GS105PE User Manual

1. Register With the NETGEAR Insight App

3. Discover the IP Address of the Switch

Installation Guide

5-Port Gigabit Ethernet PD-Powered/PoE Pass-thru Smart Managed Plus Switch

Model GS105PE

Package Contents

• Switch model GS105PE

• Wall mount kit

• Installation guide

Ethernet cables not included.

Use the NETGEAR Insight app to register your switch, activate your warranty, and access support.

1. On your iOS or Android mobile device or tablet, visit the app store, search for NETGEAR Insight, and download the latest version of the app.

2. Open the NETGEAR Insight app.

3. If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.

4. Enter the email address and password for your account and tap LOG IN.

5. Tap + in the upper right corner.

6. Enter the serial number located on the bottom of the switch, or use the camera on your mobile device or tablet to scan the serial number bar code.

7. Tap Go.

8. Follow the onscreen instructions to add your switch to a network location.

The switch is registered and added to your account.

2. Connect the Switch

GS105PE switch

IP camera

Wireless AP

Sample Connections

PoE switch

Router

Internet

An IP address is required to congure your switch. The switch gets an IP

address from a DHCP server (such as your router) by default. If your switch is not connected to a DHCP server, use the default IP address: 192.168.0.239.

1. Connect your mobile device to the same WiFi network as the switch.

2. Make sure that the network connects to the Internet.

3. Launch the NETGEAR Insight app from your mobile device.

4. Log in to your account.

The current IP address of the switch displays.

4. Congure the Switch

We recommend that you use a web browser on a computer or tablet to congure

the switch.

Note: If your computer is a Mac, use the NETGEAR Switch Discovery Tool, as

described on the other side of this document.

1. Open a web browser from a computer or tablet connected to the same network as your switch.

You can use a WiFi or wired connection.

2. Enter the IP address of the switch.

3. Enter the password.

The default password is password. We recommend that you change the password to a more secure password.

4. Click the Login button.

Desktop

Server

Other Discovery and Conguration Methods

The NETGEAR Switch Discovery Tool and the ProSAFE Plus Utility also let you

discover the IP address and congure the switch.

• NETGEAR Switch Discovery Tool. You can use a Mac or a 64-bit Windows- based computer that is on the same network as the switch. You can use a WiFi or wired connection. When you discover the switch, this tool provides access to the local browser interface to congure the switch. To download the NETGEAR Switch Discovery Tool, visit www.netgear.com/support/product/netgear-switch-discovery-tool.aspx.

• ProSAFE Plus Utility. To download the latest utility and user manual, visit www.netgear.com/support/product/PCU.

If you cannot discover or congure the switch, you might need to temporarily disable the rewall, Internet security, or antivirus programs. Make sure to reenable these security services after you discover and congure the switch.

PoE Pass Through

This switch supports PoE pass through. If the input voltage to port 5 is less than 45 VDC, PoE pass-through is disabled.

LED Color and activity

Power

Left port LED

Right port LED PoE PD port 5

Right port LED PoE PSE ports 1 and 2

The GS105PE switch must receive power through its PD port from a PoE switch. The GS105PE switch can then pass a portion of that power through to PSE port 1 and PSE port 2. Depending on the power supplied to the PD port, up to 20W of PoE power can be supplied to the PSE ports (assuming the sourcing PoE device is IEEE 802.3at).

• Solid green. PoE pass-through is enabled.

• Blinking green. PoE pass-through is disabled

• Solid green. 1000 Mbps link.

• Blinking green. 1000 Mbps link activity.

• Solid yellow. 10/100 Mbps link.

• Blinking yellow. 10/100 Mbps activity.

• Solid green. Receiving power from PSE per 802.3at specication

• Solid yellow. Receiving power from PSE.

• Solid green. Supplying power.

• Blinking green. PoE fault.

• Off. No PoE power. PD not detected.

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get help, access the

latest downloads and user manuals, and join our community. We recommend

that you use only ofcial NETGEAR support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Do not use this device outdoors. If you connect cables or devices that are outdoors to this device, see https://kb.netgear.com/000057103 for safety and warranty information.

October 2018

PSE port 1 is given the highest priority. The GS105PE switch delivers power to PSE port 2 based on the actual power left and the reported PoE Class of the device connected to port 2. For example, you can power two PoE devices that are Class 0 or Class 3 if the device on PSE port 1 consumes less than 4.5W.

Device Class Power Delivered Power Allocated

0 0.44–12.95W 15.4W

1 0.44–3.84W 4.0W

2 3.84–6.49W 7.0W

3 6.49–12.95W 15.4W

NETGEAR, Inc.

350 East Plumeria Drive San Jose, CA 95134, USA

NETGEAR INTL LTD

Building 3, University Technology Centre Curraheen Road, Cork, Ireland