Netgear GS105 User Manual

Installation Guide
ProSAFE 5-Port Gigabit Switch GS105v5
Step 2. Connect power and power on. Step 3. Check status.
On
Off
Power LED
Port LEDs
Activity (blinking)
No link (off)
1000 Mbps link
(both LEDs)
(right LED)
10 Mbps link
(left LED)
100 Mbps link
Computer Server
Optional routerGS105
Optional modem
Internet
OFF/ON switch
Note: Move the OFF/ON switch to
the ON position to provide power to the device.
April 2014
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc.
350 East Plumeria Drive San Jose, CA 95134 USA
Specifications
Specification Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or
1000BASE-T
Network cable Category 5e (Cat 5e) or better Ethernet cable
Ports 5
Power adapter 12V @ 0.5A DC input
Power consumption 2.7W max
Weight
0.254 Kg (0.56lb)
Dimensions (W x D x H)
100.8 x 94 x 25.9 mm
3.97 x 3.7 x 1.02 in
Operating temperature 0–50° C (32–122° F)
Operating humidity 10%–90% relative humidity, noncondensing
Electromagnetic compliance CE Class B, FCC Class B, VCCI Class B, C-Tick Class
B, EAC
Safety agency approvals CE mark, CB, EAC
Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/
Loading...