NETGEAR GS105 User Manual

5-Port Switch
10/100/1000 Mbps Gigabit Ethernet GS105
Installation Guide
Introduction
The NETGEAR® 5-Port Gigabit Ethernet Switch Model GS105 provides you with a low-cost, reliable, high-performance switch to connect up to five different Ethernet-enabled devices (such as computers, file servers and routers) at blazing Gigabit Ethenet speeds.
Ethernet cables come as either straight-through or crossover cables—depending on whether you’re connecting to a device (computer, server, or printer) or networking equipment (hub, switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one you use. Each port on the GS105 switch automatically configures itself correctly when you plug in a device’s cable.
If you have a problem with your switch, NETGEAR offers support 24 hours a day and 7 days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by phone (see the provided support information card for phone numbers).
Installation Overview
Estimated Time: 5–10 minutes
1. Unpack the box and verify the contents.
2. Prepare to install the switch.
3. Install the switch and connect the other devices.
5
Model GS105 5-Port 10/100/1000 Mbps Gigabit Ethernet Switch
Unpack the Box and Verify the Contents
When you open the box, verify that you received everything. The package includes:
5-Port Gigabit Ethernet Switch GS105
AC power adapter
Wall-mounting screws
GS105 Installation Guide (this document)
Warranty card
Support information card
If you don’t have everything listed above, see the support information card for contact infor­mation. If you’re missing the support information card itself, get contact information at www.NETGEAR.com in the Technical Support area.
1
1
Installation guide, warranty card and Support information card
5
Model GS105 5-Port 10/100/1000 Mbps Gigabit Ethernet Switch
Wall-mount hardware
Power adapter
Loading...
+ 5 hidden pages