Netgear EVA9100 Installation Guide

)NSTALLATION'UIDE

Digital Entertainer Express Model EVA9100

Start Here

This guide explains how to install the Digital Entertainer Express using the basic setup;
wired Ethernet LAN; and video cable and audio cable included in the package, HDMI, or
SCART.

For wireless setup (using the optional USB Wi-Fi adapter), custom setup, or component
video connections, a User Manual is provided on your NETGEAR Resource CD, or
download the latest documentation at http://www.NETGEAR.com/support.

Install your Digital Entertainer Express in this order:

1. Connect the Digital Entertainer Express.

2. Set up the Digital Entertainer Express.

3. Install software on your computer with the NETGEAR Resource CD.

4. Configure your media library to work with the Digital Entertainer Express.

Connecting the Digital Entertainer
Express

The figure below shows the rear view of the Digital Entertainer Express Model EVA9100.

To connect the Digital Entertainer Express:

Component

SCART

S-Video

Stereo

S/PDIF

Ethernet port

coaxial
(audio)

HDMI

S/PDIF optical

USB

Power

video

(audio)

port

audio

with LEDs

Composite

video

On/off
switch

1. Connect the Digital Entertainer Express to your TV set and audio equipment. If you
use a digital audio/visual (a/v) receiver, use an S/PDIF coaxial or optical cable to
connect it.

2. Connect the Digital Entertainer Express to the router with an Ethernet cable.

3. Connect the Digital Entertainer Express power cord, and plug it into an outlet. Make
sure the on/off switch is set to on.

The LED on the front of the Digital Entertainer Express lights up to show that it is
powered on.

4. Install the two AA batteries into the remote control that shipped with the product.

Setting Up the Digital Entertainer
Express

To set up the Digital Entertainer Express:

1. Turn on the TV.

2. Set the video source selector on your TV to match the connection from your Digital
Entertainer Express. For example, if you used HDMI, set the TV to use Digital HD or

HDMI input.

Note: If your TV has multiple inputs of a specific type (such as HDMI1 or HDMI2), make

sure that you have selected the correctly numbered input.

3. Check the TV display. If it is not clear, aim the remote control at the Digital
Entertainer Express, and press TV Mode. You can cycle through the TV modes to get
the best display. It can take 3 or 4 seconds for each TV mode change.

4. As part of the initial setup, you are prompted to select a language.

5. When you hear the audio welcome message, press OK.

If you do not hear the audio welcome message, check the connections to the Digital
Entertainer Express.

6. Select Basic Setup, and then set up the TV resolution.

7. Depending on where you bought your Digital Entertainer Express, you might be
prompted to enter your zip code or to choose your country and nearest city.

If you want to receive weather information, enter your zip code. Press the down
arrow when you are finished, and then press OK.

8. When prompted to install software, go to the computer where your media files are
stored.

Installing the NETGEAR Digital
Entertainer Express for Windows
Software

After connecting the Digital Entertainer Express and completing basic setup, follow these
steps to install the software:

1. Power on your computer, and log in as needed.

2. Insert the NETGEAR Resource CD into the CD drive on the computer.

The Welcome screen opens. If you do not see the Welcome screen, browse the files
on your CD, and then click Setup.

3. Select Install the NETGEAR Digital Entertainer for Windows software.

The Setup Wizard starts.

4. Follow the Setup Wizard steps to accept the licence and install the software.

EVA9100_IG.fm Page 1 Sunday, August 9, 2009 2:43 PM

August 9, 2009

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.

© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks
of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.

5. After the Setup Wizard steps are finished, click Configure to use the Configuration
Wizard.

Configuring Your Media Library

Use the Configuration Wizard to set up your
media library to work with the Digital Entertainer
Express. Follow these steps:

1. Click Next to begin.

The Configuration Wizard prompts you to
select media folders to be shared. This will
allow the Digital Entertainer Express to
access these files.

2. Browse and select the folders that you want,
and then click Next.

The Configuration Wizard is ready to
configure your Digital Entertainer Express
and displays this screen:

3. For some firewalls, specific ports must be
opened so that the Digital Entertainer Express
can access media files on your computer. If
prompted, select Allow or Unblock to allow
the access.

4. Click Next, and follow the onscreen instructions to select your media folders.

5. When you are finished, go to your TV.

Your Digital Entertainer Express is ready to use. The main menu displays. For more
information about using the Digital Entertainer Express, a User Manual is provided on
your NETGEAR Resource CD, or download the latest documentation at http://
www.NETGEAR.com/support.

Safety Information

Please read and follow this important information, especially those instructions related to
the risk of electric shock or injury to persons.

Warning: To reduce the risk of electric shock, do not remove the cover. There
are no user serviceable parts inside.

Warning: This device can display static images, which can cause “burn-in” of
certain displays. Avoid leaving static images (such as photos or paused videos)
onscreen for long periods of time.

Warning: There are no user-serviceable fuses. To avoid fire hazard, use only
the specified fuses with the correct type number, voltage, and current ratings as
referenced in the service instructions or on the equipment. Fuses should be
replaced only by qualified service personnel.

Warning: This device should be used only indoors in well-ventilated areas. To
reduce the risk of fire, electric shock, or interference, do not expose this
appliance to moisture or rain, and use only the recommended accessories.

Technical Support

Thank you for selecting NETGEAR products. For more information and to access the
online Digital Entertainer Express User Manual, see the Resource CD that came with
your product.

After installing your device, locate the serial number on the label of your product and use
it to register your product at http://www.NETGEAR.com/register. Registration is required
before you can use our telephone support service. Registration via our website is strongly
recommended.

Go to http://kbserver.netgear.com for product updates and Web support. For Warranty and
Regional Customer Support information, see the Resource CD.

EVA9100_IG.fm Page 2 Sunday, August 9, 2009 2:43 PM