Netgear EVA9100 Setup Guide

Set Up PlayOn™

Installing and Setting Up PlayOn

Installing PlayOn Plugins

Accessing Your PlayOn Content

Related URLs

NETGEAR, Inc.
350 E. Plumeria Drive
San Jose, CA 95134 USA

August 2009
208-10533-01
v1.0

Installing and Setting Up PlayOn

To download the PlayOn software, click on the following link. It is free to use for a trial
period.

Free Trial Software

If you would like to purchase the PlayOn software, for a limited time NETGEAR Digital
Entertainer Express customers will receive a 25% discount off of the suggested PlayOn
retail price. Just enter the coupon code “NETGEAR” in the coupon code section on the
PlayOn purchase price web page at the following link (you may also need your MAC
address or the serial number of the Digital Entertainer Express found on the back of your
unit):

Purchase PlayOn at 25% discount

To install and set up PlayOn:

After downloading the PlayOn executable file, you need to install the program and set it up
for use with the Digital Entertainer Express.

You have the option of saving the download to a temporary folder or running it directly
from the download site. (NETGEAR recommends that you download the program first.)

Installing and Setting Up PlayOn 1

Click Save. The program will begin to download.

Wait until the program has completed downloading as indicated by the progress bars.

When the download is complete, go to the folder where you downloaded the program,
and run PlayOn from there.

The following screen displays.

Installing and Setting Up PlayOn 2

Click Run. The InstallShield Wizard displays and the installation will begin.

Wait until the installation is complete and the setup initializes, as indicated by the progress
bars. When complete, the following PlayOn Installation Wizard displays.

Installing and Setting Up PlayOn 3