Netgear AirCard 760S Quick Start Guide

GETTING TO KNOW
YOUR NEW

TELSTRA
WI-FI 4G

MOBILE

LET’S GET THIS
SHOW ON THE ROAD

You must be excited about your brand new
Telstra Mobile Wi-Fi 4G. This guide will help
you get started as quickly and easily as
possible. It’ll guide you through installation,
show you how to set up your modem and help
you with any tricky bits.

WHAT’S
INSIDE

03 Safety fi rst
05 Before you get started
07 Let’s get started
08 About your Telstra Mobile Wi-Fi 4G
13 Getting connected
14 Recharging your battery
15 Accessing the internet
16 What about International Roaming?
17 Problem solving
20 Terms and conditions

01

02

SAFETY
FIRST

Please read all the safety notices before using this device.
The Telstra Mobile Wi-Fi 4G is designed to be used at least
20 cm from your body.

Do not use the Telstra Mobile Wi-Fi 4G near fuel or chemi­cals or in any prescribed areas such as service stations,
refi neries, hospitals, and aircraft. Obey all warning signs
where posted.

RADIO FREQUENCY SAFETY INFORMATION

The Telstra Mobile Wi-Fi 4G has an internal antenna. For
optimum performance with minimum power consumption,
do not shield the device or cover with any object. Covering
the antenna affects signal quality, and may cause the
Telstra Mobile Wi-Fi 4G to operate at a higher power level
than needed, and may shorten battery life.

RADIO FREQUENCY ENERGY

Your Telstra Mobile Wi-Fi 4G is a low-power radio trans­mitter and receiver. When switched on it intermittently
transmits radio frequency (RF) energy (radio waves). The
transmit power level is optimised for best performance
and automatically reduces when there is good reception.
Maximum power is only used at the edge of network cover­age so under most circumstances, the power output is
very low. Under poor network conditions the Telstra Mobile
Wi-Fi 4G transmits at a higher power, may get hot and have
signifi cantly shorter battery life.

03

DECLARATION OF CONFORMITY —
MAXIMUM PERMISSIBLE EXPOSURE

The Telstra Mobile Wi-Fi 4G is designed to be used at
least 20 cm from the body. We declare that the product
detailed in this manual, and in combination with our
accessories, conforms with the essential requirements
of the Radio Communications (Electromagnetic Radia­tion — Human Exposure) Standard 2003 and the relevant
standards made by the Australian Communications and
Media Authority under Section 376 of the Telecommunica­tions Act 1997 when at a distance of not less than 20 cm
from the body.

RoHS declaration
(restriction of hazardous substances)

The manufacturer declares that the Telstra Mobile Wi-Fi
4G is free from hazardous materials and complies with EU
directive 2002/95/EC (commonly known as RoHS) and the
amendments.

04

BEFORE YOU
GET STARTED

Note: The Telstra Mobile Wi-Fi 4G comes with the SIM

card inserted.

IF YOU NEED TO REPLACE THE SIM CARD

Remove the existing SIM card and slide the new SIM card
under the SIM card holder, as shown in the illustration.

05

IMPORTANT:

Security settings — Wi-Fi Network Name (SSID) and Wi-Fi
Security Key.

• The default Wi-Fi Network Name (SSID) and Wi-Fi
Security Key are unique to your device and accessible on
the LCD screen.
The format is:

Wi-Fi 4G-xxxx
Security Key: xxxxxxxx

where x is a randomly generated number.

• You need this information to connect to the Telstra
Wi-Fi 4G.

• You can change the Wi-Fi Network Name and Security
Key by going to the device homepage
(http://telstra.4g) and logging in with the default Admin
Password, admin.

• If you can’t locate your Wi-Fi credentials or Admin
Password, check the label under the back cover or
contact us on 13 2000.

• You can access additional information such as data
usage, view alerts, and more from the LCD dashboard.

06