TELSTRA ELITETM
MOBILE BROADBAND USB
QUICK START GUIDE
WELCOME TO THE TELSTRA ELITE™
MOBILE BROADBAND USB
The following steps will guide you through installing your Telstra Elite™ Mobile Broadband
USB, which is designed to operate on Telstra’s Next G® network.
Your package contains:
USB modem with TRU-Install™
This Quick Start Guide
USB extension cable
Notebook computer clip
Lanyard (already attached)
External antenna — improves performance
in areas with low signal strength
microSD
™
card — for external data storage
microSD slot
This Quick Start Guide includes the following
sections:
Installation, page 2
Using the Modem, page 4
LED Operation, page 6
SIM card slot
USB connector
Frequently Asked Questions, page 7
External
antenna
connector
LEDs
Power
Data
Cap
1
INSTALLATION
This modem is TRU-Install enabled and does not require a CD for installation.
You can use your modem with these operating systems:
Windows® XP
Windows Vista
Windows 7
(Windows 64-bit editions are also supported)
Mac OS
Remove the cap from the end of the modem and insert the SIM card as shown.
1
Insert the modem into the USB slot.
2
Windows
The software installation process starts automatically. Follow the on-screen prompts to
install the Connection Manager software. This may take a few minutes to complete.
Mac OS X
When the Telstra Connection Manager window appears, double-click the installer package.
2
®
®
X 10.4.11 or later (including 10.6)