Réf: ROMEO/V1/Aug04
GB Instructions for use
Safety instructions . . . . . . . . . . . . . . . . . . . . . . .2
Parts and controls . . . . . . . . . . . . . . . . . . . . . . . .2
Important information . . . . . . . . . . . . . . . . . . . . .3
Before using your appliance for the first time . . . . .3
Making coffee . . . . . . . . . . . . . . . . . . . . . . . . . .4
Preparing hot water . . . . . . . . . . . . . . . . . . . . . .4
Heating liquids with steam . . . . . . . . . . . . . . . . . .5
Preparing milk froth . . . . . . . . . . . . . . . . . . . . . .5
Changing the standard settings . . . . . . . . . . . . . .6
Care and daily cleaning . . . . . . . . . . . . . . . . . . .7
Descaling the appliance . . . . . . . . . . . . . . . . . . .8
Messages on the display . . . . . . . . . . . . . . . . . .10
Optical message . . . . . . . . . . . . . . . . . . . . . . .10
What to do in the event of a fault ? . . . . . . . . . .11
NESPRESSO Club . . . . . . . . . . . . . . . . . . . . . .12
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Technical specifications . . . . . . . . . . . . . . . . . . .12
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
GB
32
Safety instructions
Please read the operating instructions carefully and keep them in a safe place!
This appliance is designed for domestic and
not industrial use.
Risk of electric shock!
Connect and operate the appliance only in
accordance with the specifications on the
rating plate.
Keep children away from the appliance.
Use the appliance inside and at room tem-
perature only.
Do not use the appliance if the power cord
and/or appliance are damaged. If a fault
occurs, immediately pull out the main plug.
To prevent injury, repairs to the appliance,
such as replacing a damaged power cord,
should be carried out by NESPRESSO Club
Do NOT
l
bring the power cord into contact with
hot parts
l
pull the power cord over sharp edges
l
carry the appliance by the power cord
Do not place the appliance on or near hot
surfaces, e.g. hobs.
Never immerse the appliance or main
cable in water.
Risk of injury !
Do not place fingers thr
ough the door of the
capsule infeed.
The warming plate 6 becomes hot, do not
touch.
Do not switch on the appliance without coffee outlet 18 and capsule support 19.
Risk of scalding!
The nozzle for hot water/steam 13 and the
CAPPUCCINO/CAFFELATTE frothing device
12 become very hot. Hold the nozzle by the
plastic part only and not by the metal
parts.
Never leave the appliance unattended while
it is switched on!
Parts and controls
Fig. 1
1
Button On–/Power save
2 Button - Small cup
3 Button + Large cup
4 Button P Steam
5 Display
6 Warming plate for cups
7 Lid (for water tank)
8 Water tank
9 Hot water/steam lever (Tap display)
10 Steam pipe
11 Adapter
12 CAPPUCCINO/CAFFELATTE
(device for frothing and heating milk)
13 Nozzle (for hot water/steam)
a) Nozzle holder
b) Sleeve
c) Nozzle tip
14 Drip tray
15 Capsule container (with drip grid)
16 Float
l
To acknowledge English:
Press button P
4.
Select a different language with buttons
-
2 or + 3 and save with button P 4.
Wait and Rinsing are now indicated on dis-
play
5.
The appliance heats up and is rinsed. A little water runs into the drip tray
14.
The appliance is now ready to use.
Ready is indicated on display 5.
If English has already been acknowledged but a different language is
required, see the chapter on «Changing
standard settings».
Water hardness
The preset water hardness is 3.
The water hardness can be ascertained
with the enclosed test strip or by asking
your local water supply company.
To change the water hardness, see the
chapter on «Changing standard settings».
Power save mode
If the appliance is not used for one hour, it
automatically switches to power save mode.
Power save is indicated on display 5.
This function can be switched on and off in
Standard settings.
The warming plate
6 is not switched off
in power save mode.
Automatic rinsing
The appliance is automatically rinsed whenever
it is switched on unless it is still war
m.
17 Mains switch I/0
18
Coffee outlet
19 Capsule support
20 Ledge (with capsule infeed)
Important information
l
Fill the water tank 8 with fresh, cold water
only and change daily.
l
Place only NESPRESSO®–capsules on the
ledge. Other objects may damage the
appliance.
l
Use undamaged NESPRESSO®–capsules
only. Deformed or torn capsules may
stick in the appliance and damage it.
NESPRESSO®– capsules
Use only NESPRESSO®–capsules for this
appliance.
Order address:
NESPRESSO Club, www.nespresso.com
Before using your
appliance for the first time
Switching on the appliance
l
Insert the mains plug.
l
Set the mains switch 17 to I.
l
Fill the water tank 8 with fresh, cold
water and insert into the appliance.
l
Press button 1.
All lamps light up.
The factor
y setting
language and English
light up alternately on display 5.
54
Making coffee
Tip: To ensure a successful espresso coffee,
prewarm the cups on the warming plate
6
or fill the cups with hot water and rinse out.
The appliance must be switched on, Ready
is indicated on Display 5.
l
Place a NESPRESSO®– capsule with
the membrane face down on the ledge
20 (Fig. 2).
l
Place a prewarmed cup under the coffee
outlet
18.
l
Press button 2 or button 3 depending on the cup size. The cup is filled.
The coffee outlet stops automatically
when the programmed amount has
run through.
Ready is indicated again on display 5.
After use the capsule is automatically
conveyed into the capsule container
15.
Stopping the coffee outlet early
l
Press button 2 or button 3 again.
Permanently changing the
amount of liquid
The preset amount for a small or large cup
can be changed.
l
Hold down button 2 or button 3
until the required amount of coffee has
run through.
The amount can be changed again at
any time.
Additional amount of liquid
l
Press button 2 or button 3 again
within four seconds after the coffee outlet
has stopped.
The same amount of water is conveyed
again by the capsule.
Making coffee or drawing
water immediately after
drawing steam
If coffee is drawn immediately after steam
has been drawn by pressing button
2 or
button
3, the appliance automatically
cools down beforehand. First the appliance
gives off steam at intervals, then the coffee
flows out of the coffee outlet
18.
If hot water is to be drawn immediately
after steam has been drawn, cool down the
appliance beforehand by pressing button
4, the appliance gives off steam into the
drip tray
14.
Preparing hot water
Hot water can be prepared with this function, e.g. for a cup of tea.
Risk of burns
The nozzle becomes very hot, hold the
nozzle by the plastic part only.
l
Screw the nozzle 13 onto the adapter
11 of the steam pipe 10 (Fig. 3).
l
Hold a glass or a cup under the nozzle 13
.
l
Put the hot water/steam lever 9 in a hori-
zontal position.
Hot water runs out of the nozzle
13.
l
To stop the hot water, put the hot
water/steam lever
9 back in the upright
position.
Wait is indicated briefly on display 5.
Ready is indicated again on display 5.
Heating liquids with steam
Risk of scalding
Steam is very hot. It may cause the liquid to
splash.
l
Screw on the nozzle 13 (Fig. 3).
l
Press button 4.
Steam and Wait flash alternately on dis-
play
5.
As soon as Steam and Ready flash alternately on display
5, steam can be drawn.
l
Immerse the nozzle 13 deep into the liquid, but do not touch the bottom of the
vessel.
l
Put the hot water/steam lever 9 in a horizontal position (Fig. 4).
l
Slowly rotate the vessel.
The liquid is heated.
l
When the liquid is hot, put the hot
water/steam lever
9 back in the upright
position.
Steam and Ready are indicated alternately
on display
5.
The appliance now automatically cools
down for approx. 1 minute.
Ready is indi-
cated again on display
5.
Clean the nozzle 13 as soon as it has
cooled down. Dried residue is difficult to
remove. See the chapter on «Care and
daily cleaning».
Preparing milk froth
Frothing or heating milk
Risk of scalding
The steam is very hot.
Handle the frothing device by the plastic
part only.
l
Firmly fit together the frothing device for
CAPPUCCINO/CAFFELATTE 12
(Fig.
5/a).
There must be no gaps.
l
Connect the frothing device 12 firmly to
the adapter
11 on the steam pipe 10
(fig. 5/b).
l
Immerse the hose into a vessel containing milk.
l
Move the selector on the frothing device
12 either to CAPPUCCINO (milk froth) or
CAFFELATTE (hot milk).
l
Place a cup or a glass under the nozzle
of the frothing device
12.
l
Press button 4.
l
When Steam and Ready flash alternately
on display
5, put the hot water/steam
lever
9 in a horizontal position.The milk
is drawn in, heated and frothed.
76
cool down the appliance. The appliance
gives off steam into the drip tray
14.
l
Remove the drip tray 14 and capsule
container
15. In this case ignore the dis-
play
(Fig. 6).
l
Place the glass with the milk froth under
the coffee outlet.
l
Insert the capsule and press button 3.
l
When the coffee has run through,
remove the glass and re–insert the drip
tray
14 and the capsule container 15.
Changing the standard
settings
The standard settings can be changed.
For this purpose, additional functions have
been assigned to buttons
1, 2, button
3 and 4.
Button P = Access programming mode
Button + = Selection button +
Button - = Selection button –
Button = Save settings
The following standard settings can be
changed:
l
Language
l
Water hardness
l
Power save mode
l
Warming plate
Programming the appliance
The appliance must be switched on.
l
Hold down button P 4 for at least
three seconds.
Programming mode is activated.
l
Finally, put the hot water/steam lever 9
in an upright position. The appliance
steams briefly.
The appliance remains in steam mode for
approx. 1 minute. Then
Ready is indicated
again on display
5.
Tip: The milk froth and the temperature of
the milk in the CAPPUCCINO range can be
modified by slightly rotating the selector on
the frothing device
12. The temperature in
the CAFFELATTE range can be affected by
rotating the selector
(Fig. 5/c).
Preferably use cold, semi–skimmed milk.
Immediately clean the frothing device for
CAPPUCCINO/CAFFELATTE
12 as soon
as it has cooled down. Dried residue is
difficult to remove.
See the chapter on «Care and daily cleaning».
Cappuccino
A cappuccino consists of one third espresso, hot milk and milk froth.
l
First prepare the milk froth and fill a
large cup approx.
2
/
3
full.
l
Then place the cup under the coffee outlet and draw the espresso.
l
Finally sprinkle a little cocoa powder
over the cappuccino.
Latte Macchiato
Latte Macchiato is foam milk marked with
espresso. It is served in a tall glass.
l
First put milk fr
oth into a suitable glass
and immediately press button
4 to
l
Select the required setting on display 5
by pressing button P 4, e.g. Hardness
// Level 3.
l
To change the setting, press button - 2
and button + 3, e.g. Hardness //
Level 2.
l
Press button 1. The changed setting is
saved.
Ready is indicated again on display 5.
Changing the language
Language // English has been preset.
The following languages are available:
Deutsch Dansk
Français Norsk
Italiano Svenska
Nederlands Suomi
Español
Português
Changing the water hardness
“Water hardn.”
Hardness // Level 3 has been preset.
The following settings are available:
Level 1, 2, 3, 4 or –.
The – setting means that no water hardness
has been set. The appliance no longer signals automatically when the appliance
should be descaled.
Setting Degree of water hardness
German French
- None None
1 1-7 1-13
2 8-15 14-27
3 16-23 28-42
4 24-30 43-54
Power save mode
The power save mode can be changed from
Power save // on to Power save // off.
Warming plate
The function of warming plate 6 can be
changed from
Warmplate // on to
Warmplate // off.
Note: The Descaling procedure and
Descaling alarm functions are required
to descale the appliance, see chapter
on «Descaling».
Care and daily cleaning
Risk of electric shock!
Before cleaning the appliance, pull out the
main plug.
Never immerse the appliance in water.
Do not use a steam cleaner.
l
Rinse all loose parts by hand only.
l
Wipe the housing with a damp cloth.
Do not use scouring agents.
l
Rinse out the water tank 8 with water only
.
98
l
Pull out the drip tray 14 and capsule
container 15 (Fig. 6). Clean everything
with a mild detergent solution.
When re–inserting the tray and container, ensure that the parts are correctly
positioned with respect to each other.
l
First pull out the coffee outlet 18 and
then the capsule support
19 (Fig. 8).
l
Clean with a detergent solution and a
soft brush (not dishwasher–proof).
l
First re–insert the capsule support 19 and
then the coffee outlet
18 (Fig. 9).
Nozzle 13 for hot water/steam
l
Unscrew nozzle 13 from the steam pipe.
l
Dismantle all parts (Fig. 7).
l
Clean with a detergent solution. Clean
the nozzle tip
13/c at the front with a
blunt needle.
l
Rinse all parts with clear water and dry.
CAPPUCCINO / CAFFELATTE
Frothing device 12
The individual parts of the
CAPPUCCINO/CAFFELATTE frothing device
12 must always be clean. Even the smallest
amount of milk residue will impair the frothing result.
Therefore, after using the frothing device
12, always rinse immediately with water.
To do this:
l
Insert the hose in a vessel filled with cold
water.
l
Place a second vessel under the outlet of
the fr
othing device
12
.
l
Set the selector on the frothing device 12
to CAFFELATTE.
l
Press button 4
l
If Steam and Ready are indicated alternately on display
5, put the hot water/
steam lever 9 in a horizontal position.
l
Rinse the frothing device 12 for approx.
ten seconds.
l
Put the hot water/steam lever 9 back in
the upright position.
Depending on use, the frothing device
12
should be dismantled and cleaned at least
once a week.
l
Pull the frothing device 12 down off the
steam pipe
10 (Fig. 5/b).
l
Dismantle the frothing device 12 (Fig. 5/a).
l
Clean the individual parts carefully with
a detergent solution.
l
Rinse all parts with clear water and dry.
Descaling the appliance
If Needs to be descaled is indicated on display 5, descale the appliance immediately.
Descale the appliance according to the following instructions, otherwise the appliance
may be damaged.
Use only descaler which can be ordered
from the NESPRESSO Club.
Attentio
n
!
Never descale the appliance with vinegar
or vinegar–based agents or other agents!
Never interrupt the descaling programme.
Never drink the liquid.
Descaling programme
The descaling programme lasts approx. 20
minutes. Display
5 indicates progress of the
programme.
l
Remove nozzle 13 or frothing device 12.
l
Unscrew adapter 11.
l
Hold down button 4 for three seconds.
l
Select Start descaling procedure? with
button
4.
l
Select Yes with button 2 or button 3.
l
Press button 4.
Display 5: Empty container and press P.
l
Empty and re–insert drip tray 14 and
capsule container
15.
l
Press button 4.
Display 5: Fill agent + water and open tap.
l
Mix 100 ml NESPRESSO®descaling
agent with 500 ml water and pour into
the empty water tank
8.
l
Place an adequately large vessel with a
spout under the steam pipe
10.
l
Put the hot water/steam lever 9 in a horizontal position.
Display
5: Descaling in progress
The solution runs into the vessel.
Display
5: Return descaling solution to
water tank. Close tap and press P.
l
Carefully siphon the solution back into
the water tank
8.
l
Put the hot water/steam lever 9 in the
upright position.
l
Place the emptied vessel under the coffee
outlet
18.
l
Press button 4.
Display 5: Descaling in progress
The solution first runs visibly out of the coffee
outlet
18 into the vessel and then out of view
in the appliance and into the drip tray
14.
Display 5: Fill water and press P
l
Rinse out water tank 8 thoroughly and fill
with 1.2 litres of water.
l
Place an empty vessel under the coffee
outlet
18.
l
Press button 4.
Display 5: Rinsing
The appliance is rinsed.
Display
5: Open tap
l
Place an empty vessel under the steam
pipe
10.
l
Put the hot water/steam lever 9 in a hori-
zontal position.
Display
5: Rinsing
The appliance is rinsed until the water tank
8 has emptied.
Display
5: Close tap + empty container
l
Put the hot water/steam lever 9 in the
upright position.
1110
l
Empty, clean and re–insert drip tray 14
and capsule container 15.
l
Fill the water tank 8 with fresh water.
Display
5: Ready
The descaling alarm is automatically cancelled.
l
Wipe the outside of the appliance with a
damp cloth.
If the descaling process is terminated, the
descaling alarm is not cancelled and the
appliance prompts the customer to carry
out a complete rinsing procedure according
to the instructions on the display.
If inadequate descaling solution or fresh
rinsing water was used, the appliance
goes back one step and the display
prompts the customer to add descaling
solution or water again.
Manually resetting the Needs to
be descaled display
If a manual descaling procedure is run, the
Needs to be descaled display can be cancelled on display 5.
l
Hold down button P 4 for three seconds.
l
Select Descaling alarm reset? with button
P 4.
l
Select Yes with button -2 or button
+
3.
l
Press button 1. The Needs to be
descaled
display is cancelled.
Impor
tant
The appliance must be descaled regularly,
otherwise it will be damaged.
Messages on the display
Fill and Water flash alternately on display 5
l
The water tank 8 is empty.
Fill with frFesh water.
However, one more cup can be drawn.
Important: If the appliance signals Fill
and Water even though the tank is full,
see the chapter on «What to do in the
event of a fault».
Empty and Capsules flash alternately on
display
5.
l
The capsule container 15 is full.
Dispose of the used NESPRESSO
®
cap-
sules
(Fig. 6).
Check and Container flash alternately on
display
5.
l
The drip tray 14 and capsule container
15 are missing. Correctly insert the drip
tray
14 and capsule container 15.
Power save lights up on display 5.
l
The appliance switches automatically to
Power save if it was not used for one
hour.
Optical message
Float 16 rises.
During the rinsing process and when coffee
is being made, a little water runs into the
drip tray
14. When the tray is full, the float
rises
(Fig. 6).
l
Pull the drip tray 14 forwards.
l
Remove the capsule container 15.
l
Empty the drip tray 14 and rinse with a
little detergent solution.
l
Place the capsule container 15 on the
drip tray
14 and re–insert.
What to do in the event
of a fault?
The appliance is not functioning.
l
Check whether there has been a power
failure or the main plug has been
pulled out.
Hot water or steam cannot be drawn.
l
The nozzle 13 is blocked. Clean the nozzle
13 with a detergent solution and a
blunt needle.
Milk froth is too little or too runny.
l
The CAPPUCCINO/CAFFELATTE frothing
device
12 is blocked. Clean with a mild
detergent solution according to the
instructions.
l
Use cold, semi–skimmed milk.
Message on the display Fill // Water
despite full water tank
l
Check whether the water tank 8 is calci-
fied. If required, descale water tank
8.
l
The appliance is not detecting the water
level. Condensation may be forming on
the tank wall, then fill up the water tank.
If the water tank
8 is scratched, rotate
the tank slightly.
If the message is still displayed, please
order a new tank.
Fault codes
Risk of electric shock
Pull out the mains plug immediately if one
of the fault codes F1 to F10 lights up.
Fault
code
F1,F2,
F4, F6,
F7, F9
F 3
F 5
F 8
F 10
If the fault code lights up again when
the appliance has been switched on,
call the Hotline: 800-562-1465.
Remedial action
Electrical malfunction.
Pull out main plug and reinsert after approx. 5 seconds.
Mechanical malfunction.
Pull out mains plug and proceed
as follows:
A capsule may have been left
connected near the brewing
unit. Remove and empty the
capsule container
15. If no capsule was found, pull out the
main plug. Push in the ledge
20
as far as possible (Fig. 10). The
capsule could block the ejector
or the brewing unit. If the capsule can be seen, carefully convey it with a spoon into the capsule container
15. When the
capsule has been removed,
switch on the appliance again.
Electrical malfunction or missing
capsule support
19.
Check that the capsule support
has been inser
ted cor
rectly.
12
NESPRESSO Club
If faults cannot be rectified, call
NESPRESSO Club at 800-562-1465.
Accessories
The following accessories are enclosed with
the appliance:
Hot water/steam nozzle 13
Disposal
Please ask your dealer or inquire at your
local authority about current means of disposal.
Technical specifications
Mains voltage 220-240 V / 50 Hz
Power input 1300 W
Pressure 19 bar
Water tank 1,2 l
capacity
Dimensions 24 x 37 x 34
W x H x D [cm]
Licences See rating plate
Guarantee
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding these conditions can be obtained from
the dealer from whom the appliance was
purchased.
The bill of sale or receipt must be produced
when making any claim under the terms of
this guarantee.
Loading...