NEC X551UN Installation and Setup Guide

NEC Display Solutions of America, Inc.

X551UN Installation Guide

55” LCD Display Rev 1.1
Contents

Product Description and Notes Page 1
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front and all Sides Page 3

Back
Optional Wall Mount Dimensions (WMK-3257)
Optional Wall Mount Dimensions (WM-55UN-L)
Optional Wall Mount Dimensions (WM-55UN-P)
Optional Third Party 2x2 Wall Mount
Input Panel
Control Codes

Product Description

Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1920 x 108 0 Dimensions: 47.85 x 27.01 x 5.04 in.
Quad Resolution: 1920 x 1080 Quad Dimensions: 95.70 x 54.02 x 5.04 in.
Aspect Ratio: 16:9 Weight: 80.3 lbs
FCC: Class B Quad Weight: 321.2 lbs
Power Consumption: 255W (max) BTU’s: 870.10 BTU/hour
Quad Power Consumption: 1020W (max) Quad BTU’s: 3480.39 BTU/hour

NOTES:

 This document is intended to be use d as a reference guide to supply useful information for a design or installation. It is not

intended to be a step-by step procedure for installation.

 Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local

building codes. All mounts should make secure contact to wood studs.

 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally

to fill the screen using the menus (see “Aspect Modes” in menus and user manual).

 Distances are in inches, for millimeters multiply by 25.4.
 Distances may vary ±5%.

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg

Page 1
Page 2

Page 4
Page 5
Page 6
Page 7
Page 8
Page 8
Page 9

www.necdisplay.com X551UN Page 1 of 9

NEC Display Solutions of America, Inc.

X551UN Installation Guide

55” LCD Display Rev 1.1

Ventilation Requirements (all models)

Dimensions below are minimum required for proper ventilation.

NOTE:
 The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be

covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design revie w and
recommendations.

www.necdisplay.com X551UN Page 2 of 9

NEC Display Solutions of America, Inc.

X551UN Installation Guide

55” LCD Display Rev 1.1

Display dimensions

E

E

Note: This product is not symmetrical.

www.necdisplay.com X551UN Page 3 of 9