NEC TWINPOS G3 Quick Reference Manual

Download

Page 1

Manual Ver 1

Specifications

System View

TWINPOS G3

Memor y 1 x D DR3 D IMM s ocket , def ault at 1G B (Up to 2 GB)

Power Supp ly 220W (AC Input: 100-240V, 4-2 A, 60-50Hz) Weight 4.38k g Dimen sion (WxHxD) 300 x 94 x 270 mm (without cable cover) 300 x 94 x 350 mm (with cable cover)

I/O P orts

Audio Line- in/ L ine-o ut/ M IC USB 4 x U SB 2.0 VGA 1 x VGA Seria l Ports 4 x COM ports (2 powered COM, 5/12V selectable, Max.1A)

PS/2 2 x PS/2 ports (Keyboard, Mouse) LAN 1 x RJ45, 10/100/1000 Mbps

1 x R J11 (12V/24V, Max.1 A, a t 24V)

Envir onment

Opera ting Temp. 0 ~ 40 ℃ Stora ge Temp. -20 ~ 60 ℃ Humid ity

20% ~ 90%

TWINPOS G3

With Cable Cover (Optional)

TWINPOS G3

Quick

Reference

Guide

Paral lel 1 x Parallel port (SPP/ EPP/ ECP)

Stora ge 1 x 3 .5” H DD

CPU Intel® AtomTM pro cesso r D52 5 1.8 0GHz Chips et Intel® ICH8 M

Syste m

Without Cable Cover

Cash Drawer DC Ou t 1 x DC jack (12V, Max. 3A) PCI E xpansion Option al to support 2 PCI slot s

Acces sories 4 x Rubber foot, 1 x Cable clamp kit, Quick Reference Guide (English/ Spanish/ Chinese), AC cordset (optional)

“Perchlorate Material － special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

300 270

300

350

Unit: mm

Installation

LED Icon

Jumper Setting/ Connector Location

(Green) (Red) (Orange)

HDD

Access

LAN

Connection

Power

Power Sw itch

Cash Dra wer (RJ11)

Parallel PortVGA

4 x USB2 .0

LAN (RJ4 5)

DC Out ( 12V)

PCI slot s

COM4 COM3 COM2 COM1

From up t o down:

PS/2 (Ke yboard)

PS/2 (Mo use)

From left to right:

Line-out

Line-in

MIC

From up t o down:

125

RI 12V 5V

COM4 RI & Voltage

Selection (JP_COM4)

125

(Default)

11 12

HDD LED

11 12

Power LED

Connector Location (JPANEL1)

11 12

Reset (Reserved)

11 12

Speaker

Power Button

Clear CMOS

Data Selection

(JP1)

Keep

CMOS

Clear

CMOS

(Default)

1 2 3

Reset

1 2 3

NMI

Reset/ NMI

Watchdog Selection

(JP4)

(Default)

Cash Drawer

Voltage Selection

(JP8)

24V 12V

(Default)

RS232 RS422

RS485

COM3 RS232/422/485

Selection (JP6)

(Default)

12V

COM3 RI/Voltage

Selection (JP_COM3)

(Default)

COM3 RS232/422/485

Selection (JP9)

RS2321RS422/485

(Default)

1 7

SATA1

1 7

SATA2

652

1 2

ATX_PWR1

110

BAT1

Intel

ICH8M

L_LED1

JP4

1 2

3 4

Intel Atom

D525

1 2

9 10

JRJ45USB1

1 2

B1B4

JRJ45USB2

COM3

MS1

132

KB1

132

JD09M1

12 3 4 5

2223 2425

3233

4442

AUDIO1

1 14

LPT1

PCI1

JP5

872

CPU_FAN1

SYS_FAN1

DIMM1

JP1

212

1 2

JP7

JPANEL1

JP_COM3

JP6

JP8

JP_COM4

COM4

DRW1

VGA1

125

5110

1 2

JP9

1. Do n ot block the front side of the prod uct.

2. Be s ure to leave at least a 100mm gap b etween the bac k side of th e product a nd the wall for heat dis sipation.

3. Be s ure to leave at least a 100mm gap bet ween both si des of the product and the wall for he at dissipat ion.

100mm 100mm

100mm

Caution :

Front Panel

I/O Ports

I/O Po rts

Page 2

Safety information

・Check the Line Voltage. ・The operating voltage for the power supply should cover the range of 100〜240V,

otherwise the system may be damaged.

Notice

WARNING indicates an imminently hazardous situation which, if not avoided, could result in death or serious injury.

Disclaimer

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and property damage. It may be also used to alert against unsafe practices.

Table 1 Meaning of symbols

NEC Infrontia shall not be held liable for any direct or indirect damage or lost profit results from any use or misuse, abnormal conditions such as fire, earthquake, act beyond NEC Infrontia’s control. NEC Infrontia shall not be responsible for any direct or indirect damages or lost profit results from any act not defined in this document. This documents is subject to change without notice.

Indicates a prohibited action.

Symbol Meaning Symbol Meaning

Do not use in extreme humidity or near water.

Do not use near fire.

Potential electronic shock caused by misuse.

Potential physical damages by cover or slot.

Potential explosion by misuse.

Pull out the power plug.

Prohibit the disassembly of the device.

Do not use with wet hand.

Caution of according contents beside or in the symbol.

Potential fire or smoke caused by misuse.

Potential high temperature and failure by misuse.

Notice that user must follow.

Ground wiring required.

WARNING

This product is not designed for medical, nuclear energy development or space technology. Do not use in such condition.

Do not use in extreme humidity or near water. It may cause fire, electric or physical damage or failure.

Do not handle the AC cable with a wet hand. Ground wiring is required for this equipment.

Do not disassemble except authorized service personnel. It may cause electric shock, or fire in addition to product failure.

Install on flat, sturdy surface to avoid the device from malfunctioning or falling.

In case of a storm, do not touch the product, cables, or outlet to avoid electric shock. Please check your equipment after a storm and call a help desk in case of troubles.

Do not place heavy objects on the cables. Do not twist or jerk the cables to avoid damage. It may cause electric shocks or fire.

Do not block, insert metal objects or pour liquid into the ventilation holes or into the opening. If a foreign object gets inside the equipment, turn off the power immediately, unplug the power cable from the outlet and call a help desk for maintenance.

If a trouble is reported for the product, do not use it without proper maintenance. If the product shows any abnormal signs such that its display goes blank or generates burning smell or smoke, turn off the power immediately, unplug the power cable from the outlet and call a help desk for maintenance.

Do not plug multiple extensions on a single outlet. It may cause fire due to the overrated voltage into the product.

Do not block the front side of the product. Be sure to leave at least a 100mm gap between the back side of the product and the wall for heat dissipation. Be sure to leave at least a 100mm gap between both sides of the product and the wall for heat dissipation.

WARNING

When installing on a metal counter, a ground wiring on the counter is required.

Batteries included in the product must not be put into a fire, heated, disassembled or short-circuited. Doing so may cause an explosion, fire or injury.

Unplug the AC cable from the outlet when installing/removing a peripheral.

If the product is not being used for a long period, unplug the AC cable from the outlet.

Make sure that the AC cable is plugged firmly in the outlet and that no force is applied to the plug or the cable. A loose plug may cause high temperature or fire due to dust or water spill attached on the power plug.

When you place your hand inside the equipment for maintenance, take caution to avoid injury.

Keep the product or power cable away from direct sunlight and heating devices. It may cause a product failure or fire due to the high temperature. It also may cause electric shock or fire due to the melt of the cover dropping on the cable.

Keep away the product from any device emitting electric waves such as a security tag controller. It may cause a malfunction.

CAUTION

Make sure all pins at the both side of the power cable are plugged firmly. A loose plug may cause electric shock or fire.

Do not repair peripheral cables or power cables by yourself. Patches or repairing materials may be heated and cause a product failure or fire. Damaged cables must be replaced into new one.

Do not use aphicide or other chemical materials on the peripheral cables or power cables. It may cause electric shock or fire due to the degradation on the cable cover to damage.

Touching the damaged cable may cause electric shock or fire.

Keep away from tobacco, lighters and other materials which may cause fire.

Keep away animals from the product. Animal feces or hairs might get inside the device, causing an electrical shock or fire.

Disconnect power cables and any cables externally connected from the product when you relocate it. Otherwise it may cause a physical damage on the product or cables, electric shock or fire.

Keep away from materials with strong magnet. They may crash the data in the product.

Keep away from any electric devices which may interfere with the product due to the magnetic wave.

Using a chemical dust cloth to clean the device might damage its surface. Please follow its instructions.

CAUTION

Do not add impact to the product to avoid damage.

Plug off the power cable from the outlet when you install or maintain the product.

Do not clean the product with hard cloth or chemical cleanser. It may cause physical damage or discoloration on the product.

Disconnect the power cable during cleaning maintenance. Otherwise it may cause high temperature or fire. Wipe away dust and water spill that may cause high temperature or fire.

Do not use a power cable or peripheral cables that are not attached with the product, or provided by your dealer. It may cause fire due to the overrated voltage on the cable.

WARNING

CAUTION

TWINPOS G3

PIP1230

TWINPOS G3

PIP1230

TWINPOS G3

TWINPOS G3 TWINPOS G3