Nec 42vp4d, px-42vp4a, 42vpda User Manual

0 (0)

PlasmaSync Plasma Monitor

User’s Manual

NEC Solutions (America), Inc.

Introduction

Introduction to the PlasmaSync 42VP4, 42VP4D Plasma Monitor

NEC’s PlasmaSync™ is a seamless blend of cutting-edge visual technology and sophisticated design.At 42 inches, with a 16:9 aspect ratio, the PlasmaSync™ certainly makes a big impression. However, at a mere 89 mm thin, the monitor’s sleek techno-art lines blend in well with your environment. PlasmaSync’s crisp, vivid image quality will transform data from any graphic medium from PCs to DVD playersinto art. NEC has made sure that a host of multimedia resources can be easily connected and displayed as brilliantly as intended on the PlasmaSync™ monitor.

The features you’ll enjoy include:

42 inch screen

16:9 aspect ratio

Capsulated Color Filter (CCF) and black matrix

The enhanced display in red uses a two-stage filtering system whereAccucrimson™ is combined with our special CCF.

42VP4: Installed AR (Anti-Reflection) Filter 42VP4D: Installed AG (Anti-Glare) Filter

42VP4, 42VP4D: 3.5 inch / 89 mm thin

42VP4, 42VP4D: 62.8 lbs/ 28.5 kg light

42VP4, 42VP4D: 853 480 pixels

Flicker - and warp - free display provides excellent image geometry even in screen corners

Not affected by magnetic fields, no color drift or edge distortion.

VGA, SVGA, XGA, SXGA, UXGA computer signal compatibility

NTSC, PAL, SECAM, composite and S-Video signal compatibility

480P, 1080I, 720P and HDTV signal compatibility

PCs, VCRs, Laser Disc and DVD player source compatibility

AccuBlend scan conversion automatically converts SVGA, XGA, SXGA and UXGA signals to the panel’s native resolution

Advanced Mass Area Sampling Progressive Scan method is employed.

RGB (3*), Video (3), DVD/HD (2*), Audio input (3), External Control input (1)

AccuColor control system provides user selectable onscreen color temperature settings

New Drive Technology

Component video input terminal for DVD, 15.75kHz (Y, CB, CR )

Digital broadcasting source compatibility

OSM menu-driven on screen control system that makes image adjustments a snap

Seven languages (English, German, French, Italian, Spanish, Swedish, and Chinese)

*You can set the 5BNC input to be used as an RGB or component input. When the 5BNC input is set for RGB, there are a total of three RGB inputs; when the 5BNC input is set for component there are a total of two DVD/HD inputs (see page 24).

Contents of the Package

Plasma monitor

Power cord

Remote control with two AAA Batteries

User’s manual

Safety metal fittings*

Screws for safety metal fittings*

Ferrite core (small 2, large 2), bands

Cable clamps

*These are fittings for fastening the unit to a wall to prevent tipping due to external shock when using the stand (optional). Fasten the safety fittings to the holes in the back of the monitor using the safety fitting mount screws.

Options

Wall mount unit

Ceiling mount unit

Tilt mount unit

Stand

Attachable speakers

Important Information

Precautions

Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITHAN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Warnings and Safety Precaution

This plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required.

Please see the section “Plasma monitor cleaning procedure” on the next page.

The plasma display panel consists of fine picture elements (cells) with more than 99.99 percent active cells. There may be some cells that do not produce light or remain lit.

For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. To avoid shock and fire hazards:

1.Provide adequate space for ventilation to avoid internal heat build-up. Do not cover rear vents or install the unit in a closed cabinet or shelves.

If you install the unit in an enclosure, make sure there is adequate space at the top of the unit to allow hot air to rise and escape. If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn off the power to the monitor and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a cooler location, and wait for 60 minutes to cool the monitor. If the problem persists, contact your dealer for service.

2.Do not use this unit’s polarized plug with extension cords or outlets unless the prongs can be completely inserted.

3.Do not expose the unit to water or moisture.

4.Avoid damage to the power cord, and do not attempt to modify the power cord.

5.Unplug the power cord during electrical storms or if the unit will not be used over a long period.

6.Do not open the cabinet which has potentially dangerous high voltage components inside. If the unit is damaged in this way the warranty will be void. Moreover, there is a serious risk of electric shock.

7.Do not attempt to service or repair the unit. The manufacturer is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Refer all service to authorized Service Centers.

NOTE:

When you connect a computer to this monitor, use an RGB cable including the ferrite core on both ends of the cable. And regarding DVI and power cable, attach the supplied ferrite cores. If you do not do this, this monitor will not conform to mandatory FCC standards.

Attaching the ferrite cores:

Set the ferrite cores on both ends of the DVI cable (not supplied), and both ends of the power cable (supplied). Close the lid tightly until the clamps click.

Use the band to fasten the ferrite core (supplied) to the DVI cable.

DVI cable (not supplied)

 

 

 

 

 

 

 

 

band

band

Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

core (small)

core

(small)

Power cable (supplied)

core (large)

core (large)

To avoid damage and prolong operating life:

1.Use only with 120V 50/60Hz AC power supply. Continued operation at line voltages greater than 120 Volts AC will shorten the life of the unit, and might even cause a fire hazard.

2.Handle the unit carefully when installing it and do not drop.

3.Set the unit away from heat, excessive dust, and direct sunlight.

4.Protect the inside of the unit from liquids and small metal objects. In case of accident, unplug the power cord and have it serviced by an authorized Service Center.

5.Do not hit or scratch the panel surface as this causes flaws on the surface of the screen.

6.For correct installation and mounting it is strongly recommended to use a trained, authorized dealer.

7.As is the case with any phosphor-based display (like a CRT monitor, for example) light output will gradually decrease over the life of a Plasma Display Panel.

8.To avoid sulfurization it is strongly recommended not to place the unit in a dressing room in a public bath or hot spring bath.

Plasma monitor cleaning procedure:

1.Use a soft dry cloth to clean the front panel and bezel area. Never use solvents such as alcohol or thinner to clean these surfaces.

2.Clean plasma ventilation areas with a vacuum cleaner with a soft brush nozzle attachment.

3.To ensure proper ventilation, cleaning of the ventilation areas must be carried out monthly. More frequent cleaning may be necessary depending on the environment in which the plasma monitor is installed.

Recommendations to avoid or minimize phosphor burn-in:

Like all phosphor-based display devices and all other gas plasma displays, plasma monitors can be susceptible to phosphor burn under certain circumstances. Certain operating conditions, such as the continuous display of a static image over a prolonged period of time, can result in phosphor burn if proper precautions are not taken. To protect your investment in this plasma monitor, please adhere to the following guidelines and recommendations for minimizing the occurrence of image burn:

*Always enable and use your computer’s screen saver function during use with a computer input source.

*Display a moving image whenever possible.

*Change the position of the menu display from time to time.

*Always power down the monitor when you are finished using it.

If the plasma monitor is in long term use or continuous operation take the following measures to reduce the likelihood of phosphor burn:

*Lower the Brightness and Contrast levels as much as possible without impairing image readability.

*Display an image with many colors and color gradations (i.e. photographic or photo-realistic images).

*Create image content with minimal contrast between light and dark areas, for example white characters on black backgrounds. Use complementary or pastel color whenever possible.

*Avoid displaying images with few colors and distinct, sharply defined borders between colors.

* Note: Burn-in is not covered by the warranty.

Contact your dealer for other recommended procedures that will best suit your particular application needs.

Recommandations importantes

Précautions

Veuillez lire avec attention ce manuel avant d’utiliser le moniteur à plasma et le conserver accessible pour s’y référer ultérieurement.

ATTENTION

RISQUE D’ELECTROCUTION

NE PAS OUVRIR

MISE EN GARDE: AFIN DE REDUIRE LES RISQUES

D’ELECTRO-CUTION, NE PAS

DEPOSER LE COUVERCLE, IL N’Y A

AUCUNE PIECE UTILISABLE A

L’INTERIEUR DE CET APPAREIL. NE

CONFIER LES TRAVAUX D’ENTRETIEN

QU’A UN PERSONNEL QUALIFIE.

Ce symbole a pour but de prévenir l’utilisateur de la présence d’une tension dangereuse, non isolée se trouvant à l’intérieur de l’appareil. Elle est d’une intensité suffisante pour constituer un risque d’électrocution. Eviter le contact avec les pièces à l’intérieur de cet appareil.

Ce symbole a pour but de prévenir l’utilisateur de la présence d’importantes instructions concernant l’entretien et le fonctionnement de cet appareil. Par conséquent, elles doivent être lues attentivement afin d’éviter des problèmes.

AVERTISSEMENT

AFIN DE REDUIRE LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER CETAPPAREIL A LA PLUIE OU A L’HUMIDITE. AUSSI, NE PAS UTILISER LA FICHE POLARISEE AVEC UN PROLONGATEUR OU UNE AUTRE PRISE DE COURANT SAUF SI CES LAMES PEUVENT ETRE INSEREES A FOND. NE PAS OUVRIR LE COFFRET, DES COMPOSANTS HAUTE TENSION SE TROUVENT A L’INTERIEUR. LAISSER A UN PERSONNEL QUALIFIE LE SOIN DE REPARER CET APPAREIL.

DOC avis de conformation

Cet appareil numérigue de la classe A respecte toutes les exigences du Réglement sur le Matériel Brouilleur du Canada.

Mises en garde et précautions de sécurité

Ce moniteur à plasma a été conçu et fabriqué pour une utilisation fiable et durable. Il ne nécessite aucun entretien en dehors du nettoyage. Voir la section “Méthode de nettoyage du moniteur à plasma” plus loin. Le panneau à affichage plasma est constitué de fines particules d’images (cellules) dont plus de 99,99%sont actives. Certaines d’entre elles ne produisent pas de lumière ou restent allumées.

Pour des raisons de sé curité et pour é viter d’endommager l’appareil, lire attentivement les instructions suivantes.

Pour éviter les risques d’éléctrocution et d’incendie:

1.Laisser suffisament d’espace autour de l’appareil pour la ventilation et éviter toute augmentation excessive de la température interne. Ne pas couvrir les évents ou l’installer dans un endroit trop exigu.

Si vous installez l’appareil dans un espace clos, assurezvous qu’il y ait suffisamment d’espace au dessus pour permettre à l’air chaud de s’élever et de s’évacuer. Si la température du moniteur devient excessive, la protection contre les surchauffes entrera en action et coupera l’alimentation. Dans ce cas, éteindre l’appareil et débrancher le câble d’alimentation. Si la température de la pièce dans laquelle se trouve le moniteur est particulièrement élevée, déplacer celui-ci dans un endroit plus frais et attendre environ 60 minutes qu’il refroidisse. Si le problème persiste, prendre contact avec votre revendeur.

2.Ne pas raccorder la prise d’alimentation polarisée de ce périphérique à une rallonge ou une prise murale si les fiches ne peuvent pas être complètement insérées.

3.Ne pas exposer à L’eau ou à l’humidité.

4.Eviter d’endommager le cordon d’alimentation, et ne pas modifier le cordon d’alimentation.

5.Débrancher le câble d’alimentation électrique pendant les orages ou les longues périodes d’inactivité.

6.Ne pas ouvrir le coffret. Des composants de haute tension se trouvent à l’intérieur. Si l’appareil est endommagé de cette manière, la garantie devient caduque. De plus, il y a risque d’électrocution.

7.Ne pas essayer d’intervenir ou de réparer l’appareil. Le fabricant décline toute responsabilité en cas de blessure corporelle ou de dégâts matériels résultant d’une opération d’entretien quelconque effectuée par des personnes non qualifiées ou résultant de l’ouverture du couvercle arrière. S’adresser aux services après-vente autorisés.

REMARQUE:

Pour raccorder un ordinateur à ce moniteur, procéder à l’aide d’un câble RGB à âme de ferrite aux deux extrémités. Sur les câbles DVI et les câbles d’alimentation électrique, fixer les âmes de ferrite fournies aux extrémités. Si vous ne le faîtes, le moniteur ne sera pas en conformité avec les exigences des standards FCC.

Fixation des noyaux en ferrite.

Monter les tores en ferrite aux deux extrêmités du câble DVI (non fourni) et aux deux extrêmités du câble d’alimentation électrique (fourni).

Fermez doucement le couvercle jusqu’à ce que les crans se clipsent.

Fixer le tore en ferrite (fourni) au câble DVI à l’aide d’un collier.

Câble DVI (non fourni)

 

 

Connecteur

 

 

Collier

Collier

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

noyau (petit)

noyau (petit)

Câble d'alimentation

noyau (large)

électrique (fourni)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

noyau (large)

Pour éviter des dommages et prolonger la durée de service de l’appareil:

1.N’utiliser qu’une source d’alimentation de 120 V 50/ 60 Hz CA. Le fait d’utiliser l’appareil en continu à des tensions de ligne supérieures à 120 Volts CA réduit sa durée de vie et risque de provoquer un incendie.

2.Manipuler l’appareil avec soin pendant son déplacement et ne pas le faire tomber.

3.Eloigner l’appareil des endroits chauds, très poussiéreux et exposés en plein soleil.

4.Eviter que des liquides et des petits objets métalliques pénètrent à l’intérieur de l’appareil. En cas d’incident de ce genre, débrancher le câble d’alimentation électrique et confier le moniteur à un service après-vente agréé .

5.Ne pas frapper ou rayer la surface de la écran plasma, car des défauts risquent de se produire sur la surface de la écran plasma.

6.Pour un montage et une installation correcte, il est fortement recommandé de faire appel à un revendeur agréé et qualifié.

7.Comme c’est le cas pour tout affichage à base de phosphore (comme un moniteur CRT, par exemple), la puissance de lumière baisse graduellement au cours de la vie du Panneau d’Affichage à Plasma.

8.Pour éviter tout risque de sulfuration, il est fortement conseillé de ne pas installer l’appareil dans un vestiaire, un bain public ou un bain de source thermale.

Méthode de nettoyage du moniteur à plasma:

1.Nettoyer le panneau avant et le cadre en procédant à l’aide d’un chiffon doux et sec. Ne jamais utiliser de solvents du type alcool ou diluant pour le nettoyage de ces surfaces.

2.Nettoyer les prises d’aération du plasma en procédant à l’aide d’une brosse à poils doux fixée à un aspirateur.

3.Pour garantir la bonne ventilation du moniteur, nettoyer les prises d’air tous les mois. Un nettoyage plus fréquent peut s’avé rer né cessaire selon les conditions environnantes dans lesquelles le moniteur à plasma est utilisé.

Pour éviter les risques de brûlage du luminophore, les mesures suivantes sont recommandées:

Comme tous les périphériques d’affichage à base luminophore et tous les autres affichages gaz plasma, les moniteurs plasma peuvent être sujets au brûlage du luminophore dans certaines circonstances. Certaines conditions d’utilisation, telles que l’affichage continu d’une image statique pour une durée prolongée, peuvent causer le brû lage du luminophore si aucune précaution n’est prise. Pour protéger votre investissement dans ce moniteur à plasma, veuillez suivre les directives et les conseils suivantes pour minimiser l’occurence le marquage de l’écran:

Assurez-vous de mettre en marche et d’utliser l’économisateur d’écran chaque fois que c’est possible lorsque vous l’utilisez avec une source d’entré e d’ordinateur.

Affichez une image en mouvement aussi souvent que possible.

Changer la position de l’affichage de menu de temps à autre.

Coupez toujours l’alimentation lorsque vous avez terminé d’utiliser la moniteur.

Si le moniteur est en usage continu ou longue durée, prenez les mesures suivantes afin d’éviter l’occurence le brûlage du luminophore:

Abaissez le niveau de l’image (contraste, luminosité) autant que possible, sans faire perdre la lisibilité de l’image.

Affichez une image avec de nombreuses couleurs et graduations de couleur (par ex. des images photographiques ou photo-réalistes).

Créez un contenu d’image avec un contraste minimal entre les zones sombres et les zones claires, par exemple, des caractères blancs sur un fond noir. Utilisez des couleurs complémentaires ou pastels le plus souvent possible.

É vitez d’afficher des images avec peu de couleurs et des limites nettes et clairement définies entre les couleurs.

*Remarque: Le brûlage de l’écran n’est pas couvert par la garantie.

Contactez un revendeur agréé ou un revendeur de marque pour d'autres procédures qui conviendront le mieux à vos besoins particuliers.

Contents

How to Attach Options to the Plasma Monitor ....

1

Part Names and Function ..................................

2

Front View ..............................................................

2

Rear View / Terminal Board ......................................

3

Remote Control ........................................................

4

Battery Installation and Replacement ..........................

5

Using the wired remote control mode .........................

6

Operating Range .....................................................

6

Handling the remote control ......................................

6

Installation ......................................................

7

Connecting Your PC or Macintosh Computer ...............

8

Connections with Equipment that have a Digital Interface ......

8

Connecting Your Document Camera ...........................

8

Connecting Your VCR or Laser Disc Player ..................

8

Connecting Your DVD Player .....................................

8

Pin Assignments and Signal Levels

 

for 15 pin RGB (Analog) .........................................

9

Pin Configuration and Signal Levels

 

of the RGB 3 Connector (DVI Connector) ...................

9

Creating a video wall .............................................

10

Cable Management ................................................

10

Basic Operations .............................................

11

POWER ................................................................

11

To turn the unit ON and OFF: ....................................

11

VOLUME ..............................................................

11

To adjust the sound volume: ......................................

11

MUTE ...................................................................

11

To cancel the sound: ..................................................

11

DISPLAY ................................................................

11

To check the settings: .................................................

11

DIGITAL ZOOM .....................................................

11

AUTO ADJUST ......................................................

11

To adjust the size or quality of the picture automatically ....

11

OFF TIMER ...........................................................

12

To set the off timer: ...................................................

12

To check the remaining time: .....................................

12

To cancel the off timer ...............................................

12

WIDE Operations .............................................

13

Wide Screen Operation (manual) ...........................

13

When viewing videos or digital video discs ..............

13

When viewing a high definition video source ............

13

Wide Screen Operation with Computer Signals .........

14

OSM Controls ..................................................

15

Menu Operations ...................................................

15

Picture Settings Menu ..............................................

18

Adjusting the picture ..................................................

18

Setting the picture mode according to the brightness

 

of the room ..............................................................

18

Reducing noise in the picture .....................................

19

Setting the color temperature .....................................

19

Adjusting the color to the desired level ......................

19

Changing the Gamma Curve ......................................

20

Making the Low Tone adjustments ............................

20

Adjusting the colors ...................................................

21

Audio Settings Menu ..............................................

21

Adjusting the treble, bass and left/right balance

 

and audio input select ...............................................

21

Setting the allocation of the audio connectors ............

22

Image Adjust Settings Menu ....................................

22

Adjusting the Position, Size, Fine Picture, Picture Adj .......

22

Option1 Settings Menu ...........................................

23

Setting the on-screen menu ........................................

23

Setting the BNC connectors .......................................

24

Checking the signal being transmitted to RGB1 terminal ....

24

Setting a computer image to the correct RGB

 

select screen .............................................................

24

Setting high definition images to the suitable

 

screen size ................................................................

25

Setting the Input Skip .................................................

25

Resetting to the default values ....................................

26

Option2 Settings Menu ...........................................

26

Setting the power management for computer images ..........

26

POWER/STANDBY indicator ...................................

27

Setting the picture to suit the movie ...........................

27

Reducing burn-in of the screen ..................................

27

Setting the gray level for the sides of the screen .........

30

Option3 Settings Menu ...........................................

31

Using the timer ..........................................................

31

Setting the power on mode ........................................

32

Enabling/disabling the front panel controls ................

33

Enabling/disabling remote control wireless

 

transmission .............................................................

33

Loop Out setting ........................................................

34

ID number setting ......................................................

34

Video Wall setting ......................................................

35

Advanced OSM Settings Menu ................................

38

Setting the menu mode ..............................................

38

Language Settings Menu .........................................

38

Setting the language for the menus .............................

38

Color System Settings Menu ....................................

39

Setting the video signal format ...................................

39

Source Information Menu ........................................

39

Checking the frequencies, polarities of input signals,

 

and resolution ..........................................................

39

External Control .............................................

40

Table of Signals Supported ..............................

41

42VP4/42VP4D ....................................................

41

Troubleshooting .............................................

43

Specifications .................................................

45

42VP4/42VP4D ....................................................

45

Nec 42vp4d, px-42vp4a, 42vpda User Manual

How to Attach Options to the Plasma Monitor

You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:

*While it is upright. (See Drawing A)

*As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.

*Do not touch or hold the screen face when carrying the unit.

This device cannot be installed on its own.

Be sure to use a stand or original mounting unit. (Wall mount unit, Stand, etc.)

* See the inside of the cover page.

• For correct installation and mounting it is strongly recommended to use a trained, authorized dealer.

Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer.

Product warranty does not cover damage caused by improper installation.

*Use only the mounting kit or stand provided by manufacturer and listed under Options.

Drawing A

Drawing B

Ventilation Requirements for enclosure mounting

To allow heat to disperse, leave space between surrounding objects as shown on the diagram below when installing.

 

Wall

50mm (2")

50mm (2")

50mm (2")

Wall

50mm (2")

50mm (2")

1

Part Names and Function

Front View

POWER/STANDBY

VOLUME

 

LEFT/-

RIGHT/+

INPUTSELECT

 

POWER/STANDBY

 

 

MENU/ENTER DOWN

UP

/EXIT

 

 

7

6

5

4

1

3

2

qPower

Turns the monitor’s power on and off.

wRemote sensor window

Receives the signals from the remote control.

ePOWER/STANDBY indicator

When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red.

rINPUT SELECT / EXIT

Switches the input, in the following order.

The available inputs depend on the setting of “BNC

INPUT”.

RGB: → VIDEO1 → VIDEO2 → VIDEO3 → HD/DVD/DTV

RGB/PC3 ← RGB/PC2 ← RGB/PC1←

COMP.: → VIDEO1 → VIDEO2 → VIDEO3 → HD1/DVD1/DTV1 RGB/PC2 ← RGB/PC1 ← HD2/DVD2/DTV2 ←

tLEFT/– and RIGHT/+

Enlarges or reduces the image. Functions as the CURSOR ( / ) buttons in the On-Screen Menu (OSM) mode.

yVOLUME DOWN and UP

Adjusts the volume. Functions as the CURSOR (/ ) buttons in the On-Screen Menu (OSM) mode.

uMENU/ENTER

Sets the On-Screen Menu (OSM) mode and displays the main menu.

Functions as the EXIT buttons in the On-Screen Menu (OSM) mode.

2

Rear View/ Terminal Board

C

E

F

G

H

I

J K

 

OUT) / N I

VIDEO1

VIDEO

 

 

 

 

 

 

(

 

 

 

 

 

 

 

3 VIDEO

 

 

2 VIDEO

D

 

 

 

 

)

L

R

AUDIO1

 

 

 

 

(

 

 

 

 

 

 

 

 

MONO

 

 

 

 

 

 

 

 

 

Y

 

 

 

 

 

 

 

 

Cr/Pr Cb/Pb

 

1HD / 1DVD

 

 

 

 

 

)

L

R

AUDIO2

 

 

 

 

 

(

 

 

 

 

 

 

 

 

MONO

 

 

 

 

 

 

 

 

 

Cr/Pr

R/

 

 

 

 

 

 

 

G/ Y

2RGB

 

 

 

 

 

 

Cb/Pb

B/

2DVD /

 

 

 

 

 

 

HD

 

2HD /

 

 

 

 

 

 

VD

 

 

 

 

 

 

 

 

OUT / IN (

 

1 RGB

 

 

 

 

 

 

)

 

 

 

 

 

 

 

)

L

R

AUDIO3

 

 

 

 

 

(

 

 

 

 

 

 

 

 

MONO

 

 

 

 

AC

IN

 

 

 

 

 

 

 

 

 

 

I DV

 

 

 

 

 

 

 

 

Digital (

 

3 RGB

 

 

 

 

 

 

) RGB

 

 

 

 

 

 

 

 

Control External

 

 

 

 

 

 

 

 

N I

 

 

 

 

 

 

 

 

REMOTE

 

 

AC

IN

RIGHT

LEFT

SPEAKERS MUST

 

 

 

 

 

 

 

 

HAVE MORE THAN

 

 

 

 

 

 

 

 

7WATT RATING

 

 

 

 

 

 

 

 

IMPEDANCE 6 OHM

 

OUT

 

 

 

 

 

 

 

A B

A AC IN

G RGB1 (mini D-Sub 15pin)

Connect the included power cord here.

 

Connect an analog RGB signal from a computer, etc.

B

 

here. This input can be used for Input or Output. (see

 

page 10)

Connect speakers (optional) here. Maintain the correct

 

 

 

polarity.

H RGB3 (DVI 24pin)

Please refer to your speaker’s owner’s manual.

 

Connect a digital signal (TMDS) from a source with a

C VIDEO1, 2, 3 (BNC, RCA, S-Video)

 

DVI output. (see page 8)

 

 

Connect VCR’s, DVD’s or Video Cameras, etc. here.

I

EXTERNAL CONTROL

VIDEO1 can be used for Input or Output (see page

 

This terminal is used when operating and controlling

10).

 

the monitor externally (by external control).

D AUDIO1, AUDIO2, AUDIO3

J

REMOTE IN

These are audio input terminals.

The input is selectable. Set which video image to allot them from the audio menu screen.

EDVD1 / HD1

Connect DVD’s, High Definition or Laser Discs, etc. here.

FRGB2/ DVD2/ HD2

RGB2:

You can connect an analog RGB signal

 

and the syncronization signal.

DVD2/ HD2: You can connect DVDs, High Definition sources, Laser Discs, etc. here.

This input can be set for use with an RGB or component source. (see page 24)

Connect the remote cable* to the remote control’s remote jack to obtain wired remote control.

KREMOTE OUT

Connect the remote cable* to the REMOTE IN jack of the other display monitor to obtain wired remote control.

* The 1/8 Stereo Mini cable must be purchased separately.

3

Remote Control

POWER

OFF ON

RGB/PC DVD/HD

VIDEO

POSITION

/CONTROL MENU/ENTER

EXIT

POINTER

ZOOM VOLUME

MUTE

WIDE DISPLAY

OFF TIMER

MULTI SELECT

AUTO ADJUST

ID SELECT CLEAR

qPOWER ON/OFF

Switches Power ON/OFF.

(This does not operate when POWER/STANDBY indicator of the main unit is off.)

wRGB/PC

Press this button to select RGB/PC as the source. The available sources depend on the setting of “BNC INPUT”.

RGB: → RGB/PC1 → RGB/PC2 → RGB/PC3

COMP. : → RGB/PC1 → RGB/PC3

RGB/PC can also be selected using the INPUT SELECT button on the monitor.

eDVD / HD

Press this button to select DVD/HD as the source. The available sources depend on the setting of “BNC INPUT”.

RGB: HD/DVD/DTV

COMP.: → HD1/DVD1/DTV1 → HD2/DVD2/DTV2

DVD/HD can also be selected using the INPUT SELECT button on the monitor.

rVIDEO

Press this button to select VIDEO as the source.

VIDEO1 → VIDEO2 → VIDEO3

VIDEO can also be selected using the INPUT SELECT button on the monitor.

tMENU/ENTER

Press this button to access the OSM controls.

Press this button during the display of the main menu to go to the sub menu.

yCURSOR (/ / / )

Use these buttons to select items or settings and to adjust settings or switch the display patterns.

uEXIT

Press this button to exit the OSM controls in the main menu. Press this button during the display of the sub menu to return to the previous menu.

iPOINTER

Press this button to display the pointer.

oZOOM (+ /–)

Enlarges or reduces the image.

!0VOLUME (+ /–)

Adjusts the audio volume.

!1MUTE

Mutes the sound.

!2WIDE

Automatically detects the signal and sets the aspect ratio.

Wide button is not active for all signals.

!3DISPLAY

Displays the source settings on the screen.

!4OFF TIMER

Activates the off timer for the unit.

4

!5MULTI

Not functional for the models covered in this manual.

!6SELECT

Not functional for the models covered in this manual.

!7AUTO ADJUST

Press this button to adjust Fine Picture, Picture ADJ, Position, and Contrast automatically, or to switch the screen size to ZOOM mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.

!8ID SELECT

Set the ID number in the remote control. The remote control can then be used only for a display with the same ID number. When several displays are used together they can be controlled individually.

!9CLEAR

Clears the number set by the ID SELECT button.

@0Remote control signal transmitter

Transmits the remote control signals.

@1Remote Jack

Insert the plug of the remote cable (The 1/8 Stereo Mini cable) here when using the supplied remote control in the wired condition.

Battery Installation and Replacement

Insert the 2 “AAA” batteries, making sure to set them in with the proper polarity.

1. Press and open the cover.

2.Align the batteries according to the (+) and (–) indication inside the case.

3.Replace the cover.

5

Using the wired remote control mode

Connect the remote cable* to the remote control’s remote jack and the “REMOTE IN” terminal on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control can be operated even if no batteries are loaded.

(

 

2AUDIO R

MONO

 

)

L

 

Cr/Pr

R/

 

 

G/ Y

RGB

 

Cb/Pb

B/

2DVD / 2

 

HD

 

2HD /

 

VD

 

 

 

OUT / IN (

 

1 RGB

 

)

 

 

(

 

3 AUDIO R

MONO

 

)

L

 

I DV

 

 

 

(

 

3 RGB

 

Digital

 

 

RGB

 

 

 

)

 

 

 

Control External

 

 

 

N I

 

 

 

REMOTE

 

 

 

OUT

 

 

Control External

OUT N I REMOTE

Remote Control

Cable*

To Remote Jack

Operating Range

*Use the remote control within a distance of about 7 m/ 23ft. from the front of the monitor’s remote control sensor and at horizontal and vertical angles of up to approximately 30°.

*The remote control operation may not function if the monitor’s remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote control.

Approx.

7m/23ft

* The 1/8 Stereo Mini cable must be purchased separately.

Handling the remote control

Do not drop or mishandle the remote control.

Do not get the remote control wet. If the remote control gets wet, wipe it dry immediately.

Avoid heat and humidity.

When not using the remote control for a long period, remove the batteries.

Do not use new and old batteries together, or use different types together.

Do not take apart the batteries, heat them, or throw them into a fire.

When using the remote control in the wireless condition, be sure to unplug the remote cable from the REMOTE IN terminal on the monitor.

6

Installation

VCR or Laser Disc Player

 

 

/ N I

VIDEO1

VIDEO

VIDEO 1- 3

 

 

)

 

 

 

(

 

 

 

 

 

OUT

 

 

 

3 VIDEO

 

 

 

2 VIDEO

To video inputs on

 

 

 

the plasma monitor

 

 

 

AUDIO1 R

)

L

 

 

(

 

 

 

 

 

MONO

 

 

 

 

 

 

 

Y

 

 

Document Camera

 

 

Cb/Pb

 

HD / 1DVD

 

 

 

 

 

 

Cr/Pr

 

1

 

)

L

 

AUDIO2 R

 

(

 

 

 

 

 

MONO

 

 

 

 

 

 

 

Cr/Pr

R/

 

 

 

 

G/ Y

RGB2

DVD Player

 

 

 

 

 

 

 

Cb/Pb

B/

2DVD /

 

 

 

HD

 

2HD /

 

 

 

VD

 

 

IBM VGA or Compatibles

 

 

OUT / IN (

 

1 RGB

 

 

 

)

 

 

 

)

L

 

AUDIO3 R

Macintosh or Compatibles

(

 

 

 

 

 

MONO

 

 

 

 

(Desk top type)

 

 

 

 

 

 

 

I DV

 

 

 

 

 

(

 

3 RGB

 

 

 

Digital

 

 

 

 

RGB

 

 

 

 

 

)

 

 

 

 

External

 

 

 

Monitor adapter for

 

 

 

 

Macintosh

 

Control

 

 

 

 

N I

 

 

To Mini D-Sub 15 pin connector on the plasma monitor

 

REMOTE

 

 

 

 

 

 

OUT

 

 

 

Personal computer with a digital signal output

7

Connecting Your PC or Macintosh Computer

Connecting your PC or Macintosh computer to your plasma monitor will enable you to display your computer’s screen image for an impressive presentation. The plasma monitor supports the signals described on page 41.

To connect a PC, Macintosh or compatible graphics adapter, simply:

1.Turn off the power to your plasma monitor and computer.

2.If your PC does not support SXGA/XGA/SVGA/VGA you will need to install an SXGA/XGA/SVGA/VGA graphics board. Consult your computer’s owner’s manual for your SXGA/XGA/SVGA/VGA configuration. If you need to install a new board, see the manual that comes with your new graphics board for installation instructions.

3.This plasma monitor provides signal compatibility up to VESA 1600 1200 (UXGA). However, it is not recommended to use this resolution due to image readability on the monitor’s native pixel resolution panel.

4.Use the signal cable to connect your PC or Macintosh computer to the plasma monitor. For Macintosh, use the monitor adapter to connect to your computer’s video port, if necessary.

5.Turn on the plasma monitor and the computer.

6.If the plasma monitor goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the plasma monitor.

When using a Macintosh with the plasma monitor, the following four display standards are supported using the Macintosh adapter :

13" fixed mode 16" fixed mode 19" fixed mode 21" fixed mode

The 13" fixed mode is recommended for your 42Wide VGA.

Connections with Equipment that have a Digital Interface

Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard.

*Use a DVI 24-pin signal cable and the ferrite cores (supplied) when making connections to the RGB3 (DVI) connector of the main unit.

Note that the RGB3 (DVI) terminal does not support analog RGB input source.

Note:

1.Input TMDS signals conforming to DVI standards. The TMDS input corresponds to 1 link.

2.To maintain display quality, use a cable with a quality prescribedbyDVIstandardsthatiswithin5metersinlength.

Connecting Your Document Camera

You can connect your plasma monitor to a document camera. To do so, simply:

1.Turn off the power to your plasma monitor and document camera.

2.Use a standard video cable to connect your document camera to the Video input on your plasma monitor.

3.Turn on the plasma monitor and the document camera.

Note: Refer to your document camera owner’s manual for more information about your camera’s video output requirements.

Connecting Your VCR or Laser Disc Player

Use common RCA cables (not provided) to connect your VCR or laser disc player to your plasma monitor. To make these connections, simply:

1.Turn off the power to your plasma monitor and VCR or laser disc player.

2.Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your plasma monitor. Use standard RCA audio patch cords to connect the audio from your VCR or laser disc player to your plasma monitor (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.

3.Turn on the plasma monitor and the VCR or laser disc player.

Note: Refer to your VCR or laser disc player owner’s manual for more information about your equipment’s video output requirements.

Connecting Your DVD Player

You can connect your plasma monitor to a DVD player. To do so, simply:

1.Turn off the power to your plasma monitor and DVD player.

2.Use a component video cable to connect your DVD player to the Y, Cb, and Cr inputs on your plasma monitor.

Or use the DVD-player’s S-Video output. Use a standard S-Video cable to connect to the S-Video input on the plasma monitor.

3.Turn on the plasma monitor and the DVD player.

8

Pin Assignments and Signal Levels for 15 pin RGB (Analog)

5

 

4

3

2

1

10

9

8

7

6

15

14

13

12

11

Pin No.

Signal (Analog)

1

Red

2

Green or sync-on-green

3

Blue

4

No connection

5

Ground

6

Red ground

7

Green ground

8

Blue ground

9

No connection

10

Sync signal ground

11

No connection

12

Bi-directional DATA (SDA)

13

Horizontal sync or Composite sync

14

Vertical sync

15

Data clock

Pin Configuration and Signal of the RGB 3 Connector (DVI Connector)

The unit is equipped with a type of connector commonly used for digital.

(This cannot be used for an analog input.) (TMDS can be used for one link only.)

 

 

 

 

 

 

 

 

RGB 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

10

11

12

13

14

15

16

 

 

 

 

 

 

 

 

 

17

 

18

 

19

 

20

 

21

 

22

 

23

 

24

 

 

 

 

 

 

 

 

 

 

 

 

 

Pin No.

 

 

 

 

 

 

 

Signal (Digital)

1

T.M.D.S Data 2 -

 

 

 

 

 

 

 

 

 

 

 

 

2

T.M.D.S Data 2 +

 

 

 

 

 

 

 

 

 

 

 

 

3

T.M.D.S Data 2 Shield

 

 

 

 

 

 

 

 

4

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

5

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

6

DDC Clock

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

DDC Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

9

T.M.D.S Data 1 -

 

 

 

 

 

 

 

 

 

 

 

 

10

T.M.D.S Data 1 +

 

 

 

 

 

 

 

 

 

 

 

 

11

T.M.D.S Data 1 Shield

 

 

 

 

 

 

 

 

12

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

13

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

+5V Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

Ground

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16

Hot Plug Detect

 

 

 

 

 

 

 

 

 

 

 

 

 

17

T.M.D.S Data 0 -

 

 

 

 

 

 

 

 

 

 

 

 

18

T.M.D.S Data 0 +

 

 

 

 

 

 

 

 

 

 

 

 

19

T.M.D.S Data 0 Shield

 

 

 

 

 

 

 

 

20

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

21

No connection

 

 

 

 

 

 

 

 

 

 

 

 

 

22

T.M.D.S Clock Shield

 

 

 

 

 

 

 

 

 

23

T.M.D.S Clock +

 

 

 

 

 

 

 

 

 

 

 

 

24

T.M.D.S Clock -

 

 

 

 

 

 

 

 

 

 

 

 

 

9

Creating a video wall

With buit-in matrix display capability, you can create a 2× 2 or 3× 3 video wall.

• Connect signal cables and remote cables as shown below.

Video signal

 

RGB/DVD/HD signal

 

 

 

BNC connector

 

 

 

 

(

VIDEO

BNC connector

OUT

 

 

 

 

 

 

1VIDEO )OUT / N I

 

 

 

 

 

 

 

 

VIDEO Signal

RGB signal/

IN

 

 

3 VIDEO

 

 

2 VIDEO

 

 

RCA phono plug

 

 

 

 

 

IN

 

 

 

 

DVD/HD signal

 

VIDEO Signal

 

(

 

AUDIO1 R

 

 

 

 

 

 

)

L

 

 

 

 

 

 

MONO

 

 

 

 

 

 

 

 

 

 

 

Y

 

 

 

 

 

 

 

 

 

 

1DVD

 

 

 

 

Remote

IN

N I

 

 

control

REMOTE

OUT

OUT

control

 

 

Remote

 

 

 

 

Remote IN control

Cr/Pr

R/

 

G/ Y

RGB

Cb/Pb

B/

2DVD / 2

HD

 

2HD /

VD

 

 

OUT / IN (

 

1 RGB

)

 

 

N I

 

 

REMOTE

 

 

OUT

 

 

 

 

OUT

RGB signal/

 

 

 

DVD/HD signal

 

 

 

 

OUT Remote

control

Note:

1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.

When LOOP OUT is ON, do not connect an OUTPUT signal from another unit, that will place an extraordinary load on the other unit and may damage it.

2.LOOP OUT can not be turned ON while signals are input to RGB1 terminal.

3.LOOP OUT can be turned ON while signals are input to RGB1 terminal if the POWER is switched ON.

Information

To loop signals out to another plasma display, set the LOOP OUT to ON.

To create a video wall, set the VIDEO WALL menu items properly.

To connect monitors, please use a 1~2m (3.3~6.6 feet) BNC cable (any commercially available cable).

If the image quality is poor, do not use the monitor’s out terminal. Use a distribution amplifier (any commercially available distribution amplifier) to connect the split signals to the respective monitor INPUT terminals.

Being used as a video wall function, maximaly 4-screen is rough-standard with lower than 1024 768, 60Hz signal.

A distribution amplifier is particularly recommended when using a 9-screen video wall.

From the second monitor onward, connections require a BNC-RCA conversion cable or connector, a mini D-Sub 15 pin cable-BNC ( 5) cable or a conversion connector.

Cable Management

Using the cable-clamps provided with the plasma display, bundle at the back of the unit the signal and audio cables connected to the display.

Back of the unit

mounting hooks/mounting holes (in three places)

To attach

To detach

1.

2.

 

clamp

mounting hook

cables

10

Loading...
+ 39 hidden pages