NEC ACCUSYNC 125F User Manual
USER'S MANUAL
AccuSync 125F
To learn about other special offers, register online at www.necmitsubishi.com/ productregistration
AccuSync125Fcovercontents 01.12.12, 8:481
™
Index
Warning.................................................................................................. 1
Contents ............................................................................................... 2
Quick Start ........................................................................................... 3
Controls ................................................................................................ 5
Recommended Use ............................................................................. 9
Specifications..................................................................................... 12
Features .............................................................................................. 13
Troubleshooting................................................................................. 14
References .......................................................................................... 15
Limited Warranty .............................................................................. 16
Avertissement .................................................................................... 17
Contenu ............................................................................................... 18
Mise en marche rapide .....................................................................19
Commandes ........................................................................................ 21
Usage recommandé.......................................................................... 25
Fiche technique ................................................................................ 28
Fonctions ............................................................................................ 29
Dépannage ......................................................................................... 30
Références .......................................................................................... 31
Garantie limitée................................................................................ 32
AccuSync125Fcovercontents 01.12.12, 8:482
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK • DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This
symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this
unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to
C.S.A. 22.2 #950.
FCC Information
1.
Use the attached specified cables with the
radio and television reception.
(1) Please use the supplied power cable or equivalent to ensure FCC compliance.
(2) Shielded signal cable.
Use of other cables and adapters may cause interference with radio and television reception.
2.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional
suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: ”How to Identify and Resolve Radio-TV Interference Problems.“ This booklet is available from
the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
AccuSync 125F color monitor so as not to interfere with
No user serviceable parts inside. Do not attempt to modify this equipment. If modified, your
authority to operate this equipment might be voided by FCC.
1
AccuSync125F 01.12.12, 8:431
Contents
You can register your product online at
www.necmitsubishi.com/productregistration
Your new NEC AccuSync™ 125F monitor box* should contain the
following:
• AccuSync™125F with tilt/swivel base
• Power Cord
• Signal Cable
• User’s Manual
Signal Cable
USER'S MANUAL
AccuSync 125F
To learn about other special offers, register online at www.necmitsubishi.com/ productregistration
User’s Manual
* Remember to save your original box and packing material to transport or ship the monitor.
AccuSync125F 01.12.12, 8:432
™
Power Cord
2
Quick Start
To attach the AccuSync
™
125F monitor to your system, follow these
instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,
refer to the display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the signal cable to the
connector of the display card in your system (Figure A.1). Tighten all screws.
For the Mac: Connect the AccuSync125F Macintosh cable adapter (not
included) to the monitor connector on the Macintosh (Figure B.1). Attach the
15-pin mini D-SUB end of the signal cable to the AccuSync125F Macintosh
cable adapter on the computer (Figure B.1). Tighten all screws.
NOTE: To obtain the AccuSync125F Macintosh cable adapter, call
NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662.
4. For download information on the Windows® 98/Me/2000/XP INF file for
your AccuSync monitor, refer to the References section of this User’s Manual.
5. Connect one end of the power cord to the AccuSync125F monitor and the
other end to the power outlet (Figure C.1).
6. Turn on the monitor (Figure D.1) and the computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of
this User’s Manual.
Detachable Signal Cable
AccuSync125F 01.12.12, 8:433
15-pin mini D-DUB
Figure A.1
3
Quick Start –continued
Detachable Signal Cable
Computer
Mac Adapter
(Not included)
15-pin mini D-SUB
Figure B.1
Power
Cord
Figure C.1
Power Button
OSD OFF
AccuSync125F 01.12.12, 8:434
FPM
Figure D.1
4
Controls
OSM™ (On-Screen Manager) control buttons on the front of the monitor function
as follows:
FPM Activates at no OSM menu and to select one of display modes, NORMAL
OSD OFF
CONTROL
/
CONTROL
/
CONTROL
-/+
Main Menu
Exits the OSM menu.
Moves the highlighted
area left/right to select
one of the controls.
Moves the highlighted
area up/down to select
one of the controls.
Moves the bar in the - or
+ direction to decrease
or increase the
adjustment.
Sub-Menu
Exits the OSM menu.
Moves the highlighted
area left/right to select
one of the controls.
Moves the highlighted
area up/down to select
one of the controls.
Moves the bar in the - or
+ direction to decrease
or increase the
adjustment.
MODE, TEXT MODE and GRAPHIC MODE.
When OSM controls are activated, icons are displayed at the top of the menu.
If an arrow ( ) is displayed in a sub-menu, it indicates further choices are
available. To enter a sub-menu, press .
Brightness/Contrast/Color/AccuColor Controls
CONTRAST: Adjusts the image brightness in relation to the background.
BRIGHT: Adjusts the overall image and background screen brightness.
COLOR: Selects from desired color setting from Color preset modes 1,
2, 3 and sRGB.
NEC’s AccuColor Control System allows to decrease or increase the
monitor’s red, green or blue color guns depending upon which is
selected, at Color preset modes 1, 2 and 3. At Color preset mode sRGB
selected, AccuColor Control System is unavailable and CONTRAST,
BRIGHT and COLOR TEMPERATURE are no adjustable.
COLOR TEMPERATURE: Decreases or increases Color temperature of
the Color preset mode selected by COLOR.
FACTORY PRESET: Restores the items in Brightness/Contrast/Color/
AccuColor controls to the factory preset condition.
AccuSync125F 01.12.12, 8:435
5
Controls –continued
Size and Position Controls
HORIZ-SIZE: Decreases or increases the horizontal size of the image.
HORIZ-POSITION: Moves the image horizontally (left or right).
VERT-SIZE: Decreases or increases the vertical size of the image.
VERT-POSITION: Moves the image vertically (up or down).
ROTATION: Rotates the entire display clockwise or counterclockwise.
ZOOM: Decreases or increases the size of image.
GTF AUTO ADJUST: Adjusts the size and position of image
automatically.
FACTORY PRESET: Restores the items in Size and Position Controls to
the factory preset condition.
Geometry Controls
PINCUSHION: Decreases or increases the curvature of the sides either
inword or outword.
PIN-BALANCE: Decreases or increases the curvature of the sides either
to the left or right.
KEYSTONE: Decreases or increases the bottom of the screen to be the
same as the top.
KEY-BALANCE: Decreases or increases the tilt of the sides either to the
left or right.
TOP-PIN: Decreases or increases the top of corners.
TOP-BALANCE: Moves the slant of top to the left or right.
BOTTOM-PIN: Decreases or increases the bottom of corners.
BOTTOM-BALANCE: Moves the slant of bottom to the left or right.
VERT-LIN: Decreases or increases the spacing on the center of screen
vertically.
VERT-LIN-BALANCE: Decreases or increases the spacing on the bottom
or top of the screen vertically.
NOTE: VERT-LIN and VERT-LIN-BALANCE allow you to adjust the
spacing of the area on the screen. The purpose of these controls
is to ensure that a one-inch circles is a true circle wherever it is
on the screen. The best way to determine the vertical linearity is
as follow:
• Draw equally spaced horizontal lines using a drawing
application that has a ruler.
FACTORY PRESET: Restores the items in Geometry Controls to the
factory preset condition.
AccuSync125F 01.12.12, 8:436
6
Controls –continued
Purity(GlobalSync Control)/Moire Control
CORNER PURITY(TL): Adjust the purity condition on the top-left corner.
CORNER PURITY(TR): Adjust the purity condition on the top-right
corner.
CORNER PURITY(BL): Adjust the purity condition on the bottom-left
corner.
CORNER PURITY(BR): Adjust the purity condition on the bottom-right
corner.
LEFT/RIGHT PURITY: Adjust the purity condition on the left and right
corners.
NOTE: PURITY controls eliminate picture impurities that may result from
the earth’s magnetic field. NEC recommends that you perform
GlobalSync corrections while running a typical application such
as a spreadsheet or text document.
MOIRE CANCEL LEVEL: Moire is a wavy pattern which can sometimes
appear on the screen. The pattern is repetitive and superimposed as
rippled images. When running certain applications, the wavy pattern is
more evident than in others. To reduce moiré, adjust the level by using
the -/+ CONTROL buttons.
CLAMP PULSE POSITION: Operating your monitor at a non-standard
timing may cause images to appear darker than normal or have color
distortion. Use of the CLAMP PULSE POSITION will adjust images to
their normal state.
FACTORY PRESET: Restores the items in Purity/Moire Controls to the
factory preset condition.
Convergence Controls
HORIZ-CONVERGENCE: Adjusts the alignment of the white lines in the
up/down direction.
VERT-CONVERGENCE: Adjusts the alignment of the white lines in the
left/right direction.
FACTORY PRESET: Restores the items in Convergence Controls to the
factory preset condition.
AccuSync125F 01.12.12, 8:437
7
Controls –continued
Tools
DEGAUSS: Eliminates the buildup of stray magnetic fields which alter
the correct scan of the electron beams and affect the purity of the
screen colors, focus and convergence.
When activated, your screen image will jump and waver a bit as the
screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse between
uses of the Degauss Control.
POWER SAVE (IPM System):
ON: The IPM System works normally and all stages of energy savings
are utilized.
OFF: The Off Mode of the IPM Systems is not used.
NOTE: For standard systems and graphics boards, keep the factory
setting at ON.
CONTROL LOCK: This control completely locks out access to all OSM
controls functions except Brightness and Contrast. When attempting to
activate OSM controls while in the lock out mode, a screen will appear
indicating that OSM controls are locked out. To deactivate the Control
lock, push – control button at Control Lock menu of OSM.
OSD POSITION: You can choose where you would like the OSM
controls menu to appear on your screen. Selecting OSD Position allows
you to manually adjust the OSM controls menu left, right, up or down.
OSD TURN OFF: The OSM controls menu will stay on as long as it is in
use. In the OSD Turn Off sub-menu, you can select how long the
monitor waits after the last touch of a button for the OSM controls menu
to disappear. The preset choices are 10, 20, 30, 45, 60 and 120
seconds.
DIAGNOSIS: Indicates the current mode and frequency setting of the
monitor.
LANGUAGE: OSM controls menus are available in six languages.
AUTO SAVE: The monitor automatically saves the last settings of the
user controls. You can turn this Auto Save feature off by selecting this
menu and changing the off position.
When the off mode is selected, you will prompted with the option to
save or return to the previous setting once you select a different control.
If the save is not confirmed, the setting will go back to previous setting
when OSM turns off.
ALL RESET: Restores all items to the factory preset condition.
FACTORY PRESET: Restores the items in Tools to the factory preset
condition.
8
AccuSync125F 01.12.12, 8:438
Recommended Use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE AccuSync
• DO NOT OPEN THE MONITOR. There are no user serviceable par5ts inside and
opening or removing covers may expose you to dangerous shock hazards or other
risks. Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch danger-
ous voltage points, which can be harmful or fatal or may cause electric shock, fire
or equipment failure.
• Do not place any heavy objects on the power cord. Damage to the cord may
cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand or table, as the
monitor may fall, causing serious damage to the monitor.
• Keep the monitor away from high capacity transformers, electric motors and other
devices such as external speakers or fans, which may create strong magnetic
fields.
• If possible, position the monitor so that it is facing the east to minimize the effects
of the earth’s magnetic field.
• Changing the direction of the monitor while it is powered on may cause image
discoloration. To correct this, turn the monitor off for 20 minutes before powering
it back on.
Immediately unplug your monitor from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating instructions.
• Allow adequate ventilation around the monitor so that heat can properly
dissipate. Do not block ventilated openings or place the monitor near a
radiator or other heat sources. Do not put anything on top of monitor.
• The power cable connector is the primary means of detaching the system
CAUTION
from the power supply. The monitor should be installed close to a power
outlet which is easily accessible.
• Handle with care when transporting. Save packaging for transporting.
™
125F COLOR MONITOR:
AccuSync125F 01.12.12, 8:439
9
Loading...