NEC AccuSync 90, AccuSync 50, AccuSync 70 User Manual

0 (0)

AccuSync 70

U S E R ' S M A N U A L

AccuSync

50-70-90

To learn about other special offers, register your product online at www.necmitsubishi.com/ productregistration

 

 

 

 

 

 

AS507090.wpc

1

5/14/01, 11:21 AM

 

 

 

 

 

 

Index

 

Warning ..................................................................................................

1

Contents ...............................................................................................

2

Quick Start ...........................................................................................

3

Controls .................................................................................................

7

Recommended Use .............................................................................

9

Specifications .....................................................................................

11

Features ..............................................................................................

14

Troubleshooting .................................................................................

15

References ..........................................................................................

16

Limited Warranty ..............................................................................

17

Avertissement ....................................................................................

19

Contenu ..............................................................................................

20

Mise en marche rapide .....................................................................

21

Commandes .......................................................................................

25

Usage recommandé ..........................................................................

27

Fiche techniques ..............................................................................

29

Fonctions ............................................................................................

32

Dépannage .........................................................................................

33

Références .........................................................................................

34

Garantie limitée ................................................................................

35

AS507090.wpc

2

5/14/01, 11:21 AM

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 No. 950.

Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de sûrele Canadiens selon CAN/CSA C22.2 No. 950.

FCC Information

1.Use the attached specified cables with the N503, N703 and N903 color monitor so as not to interfere with radio and television reception.

(1)Please use the supplied power cord or equivalent to ensure FCC compliance.

(2)Shielded captive type signal cable. Use of other cable and adapters may cause interference with radio and television reception.

2.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: ”How to Identify and Resolve Radio-TV Interference Problems.“ This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.

1

AS507090.wpc

3

5/14/01, 11:21 AM

Contents

Your new NEC AccuSyncTM monitor box* should contain the following:

AccuSync Monitor with tilt/swivel base

AccuSync 50, 70 or 90

Power Cord

Captive Signal Cable

User’s Manual

Captive Signal Cable

Power Cord

U S E R ' S M A N U A L

AccuSync

50-70-90

To learn about other special offers, register your product online at www.necmitsubishi.com/ productregistration

Tilt/Swivel Base

User’s Manual

 

*Remember to save your original box and packing material to transport or ship the monitor.

2

AS507090.wpc

4

5/14/01, 11:21 AM

Quick Start

Attach Tilt/Swivel Base

To attach the AccuSync monitor to your system, follow these instructions:

1.With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside fown on a firm table (Figure TS.1).

2.Position the six hooks of the tilt/swivel base into the six holes on the bottom of the monitor (Figure TS.2).

3.Slide the tilt/swivel base forward until the latch of the tilt/swivel base is secure

(Figure TS.3).

4.Having successfully installed your tilt/swivel base, carefully turn the monitor right side up (Figure TS.4).

NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor. NOTE: To avoid self injury or damage to the monitor, attach and remove tilt/

swivel base with care.

Bottom of monitor

 

Top of monitor

 

Firm Table

CAUTION: Make certain that the tilt/

 

Figure TS.1

swivel base is locked firmly into place

Figure TS.2

before turning the monitor upright.

 

 

Figure TS.3

3

Figure TS.4

 

 

AS507090.wpc

5

5/14/01, 11:22 AM

Quick Start –continued

Remove Tilt/Swivel Base

To remove the tilt/swivel base from the AccuSync monitor, follow these instruction:

1.With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside down on a firm table (Figure TS.1).

2.Push down on the latch of the tilt/swivel base and slide the tilt/swivel base backward from the front of the monitor (Figure TS.5).

3.Pull out the tilt/swivel base from the six holes on the bottom of the monitor

(Figure TS.6).

front of monitor

Figure TS.5

Figure TS.6

4

AS507090.wpc

6

5/14/01, 11:22 AM

Quick Start –continued

To attach the AccuSync monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.If necessary, install the display card into your system. For more information, refer to the display card manual.

3.For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the Macintosh cable adapter (not included) to the monitor connector on the Macintosh (Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal cable to the Macintosh cable adapter on the computer (Figure B.1). Tighten all screws.

NOTE: To obtain the Macintosh cable adapter, call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 820-1230.

4.Connect one end of the power cord to the AccuSync monitor and the other end to the power outlet (Figure C.1).

5.Turn on the monitor (Figure D.1) and the computer.

NOTE: For download information on the Windows® 95/98/2000 INF file for your AccuSync monitor, refer to the References section of this User’s Manual.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

15-pin mini D-SUB

Captive Signal Cable

Figure A.1

5

AS507090.wpc

7

5/14/01, 11:22 AM

NEC AccuSync 90, AccuSync 50, AccuSync 70 User Manual

Quick Start –continued

Mac Adapter

(Not Included)

15-pin mini D-SUB

Captive Signal Cable

Figure B.1

Power Outlet

Power Cord

Figure C.

Power Button

Figure D.1

6

AS507090.wpc

8

5/14/01, 11:22 AM

Controls

OSM(On-Screen Manager) control buttons on the front of the monitor function as follows:

SELECT

Enters and exits the OSM menu.

CONTROL –/+

Selects one of the controls and increases or decreases the

 

adjustment.

RESET

Resets the highlighted control to the factory setting.

Adjusts the overall image and background screen brightness.

Adjusts the image brightness in relation to the background.

Red Color Contrast: Adjust the red contrast of the display

Green Color Contrast: Adjust the green contrast of the display.

Blue Color Contrast: Adjust the blue contrast of the display.

Moves the image horizontally (left or right).

Moves the image vertically (up or down).

Increases or decreases the horizontal size of the image.

Increases or decreases the vertical size of the image.

The Geometry controls allow you to adjust the curvature or angle of the sides of your display.

Increases or decreases the curvature of the sides either inward or outward.

Increases or decreases the top of the screen to be the same as the bottom.

Increases or decreases the tilt of the sides either to the left or right.

7

AS507090.wpc

9

5/14/01, 11:22 AM

Controls –continued

Increases or decreases the curvature of the sides either to the left or right.

Rotates the entire display clockwise or counterclockwise.

Degauss Control: Eliminates the buildup of stray magnetic fields that alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized.

Caution: Please allow a minimum of 20 minutes to elapse between uses of the Degauss Control.

(AccuSync50/70) This color setting is adjusted at the factory to the (AccuSync 90) stated Kelvin. There are 3 colors (9300K, 7500K,

6500K) and one user color. Choose your color preference by pressing the SELECT button on the OSMwindow.

OSM: There are 3 background colors (blue, black, and white). To choose background color, press SELECT button after the selection of OSM in “Icon select window”.

(AccuSync 50/70) To exit the OSM menu. Select EXIT in “Icon select window”, then push SELECT button to exit OSM menu.

(AccuSync 90) To exit the OSM menu. Select ESC in “Icon select window”, then push SELECT button to exit OSM menu.

Note: If no buttons are pushed after 10 seconds while in OSM, the OSM menu will automactically disappear.

AccuSync 90

Horizontal Moiré Canceler: Reduces horizontal moiré levels.

Vertical Moiré Canceler: Reduces vertical moiré levels.

8

AS507090.wpc

10

5/14/01, 11:22 AM

Recommended Use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE

FOLLOWING WHEN SETTING UP AND USING

THE ACCUSYNCTM COLOR MONITOR:

DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.

Do not spill any liquids into the cabinet or use your monitor near water.

Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.

Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

Keep the monitor away from high capacity transformers, electric motors and other devices such as external speakers or fans, which may create strong magnetic fields.

If possible, position the monitor so that it is facing the east to minimize the effects of the earth’s magnetic field.

Changing the direction of the monitor while it is powered on may cause image discoloration. To correct this, turn the monitor off for 20 minutes before powering it back on.

When operating the AccuSync with its AC 220-240V worldwide power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used. The power supply cord you use must have been approved by and comply with the safety standards of your country.

In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating instructions.

• Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of detaching the system

from the power supply. The monitor should be installed close to a power CAUTION outlet which is easily accessible.

• Handle with care when transporting. Save packaging for transporting.

9

AS507090.wpc

11

5/14/01, 11:22 AM

Recommended Use –continued

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:

• Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.

• Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches.

Rest your eyes periodically by focusing on an object at least 20 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections. Adjust the monitor tilt

so that ceiling lights do not reflect on your screen.

If reflected light makes it hard for you to see your screen, use an anti-glare filter.

Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to minimize dust.

Adjust the monitor’s brightness and contrast controls to enhance readability.

Use a document holder placed close to the screen.

Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing.

Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

Adjust the Brightness until the background raster disappears

Do not position the Contrast control to its maximum setting

Use the preset Size and Position controls with standard signals

Use the preset Color Setting and Sides Left/Right controls

Use non-interlaced signals with a vertical refresh rate between 75-120Hz for the AccuSync 50/70 and 75-160Hz for the AccuSync 90

Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast

For more detailed information on setting up a healthy work environment, call NEC - Mitsubishi Electronics Display of America, Inc. at (800) 820-1230, NEC FastFactsinformation at (800) 366-0476 and request document #900108 or write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations – ANSI-HFS Standard No. 100-1988 – The Human Factors Society, Inc. P.O. Box 1369, Santa Monica, California 90406.

10

AS507090.wpc

12

5/14/01, 11:22 AM

Loading...
+ 28 hidden pages