Murata LB1DR Users Manual

Type1DR Installation Manual

FCC ID of this product is as follows.

FCC ID: VPYLB1DR

For OEM integration only – device cannot be sold to general public.
Therefore we will ask OEM to include the following statements required
by FCC on the product and in the Installation manual Notice.

Contents

1.Land Pattern (Recommended)

2.PIN Layout

3.Supply Voltage

4.Power Levels

5.Theory of operation

6. Antenna

7.Notice

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

03 April 2015

1

6. Notice

This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.

Please describe the following warning on the final product which contains this module.

Contains Transmitter Module FCC ID:VPYLB1DR

or

Contains FCC ID: VPYLB1DR

※When the product is small, as for these words mentioned above, the posting to a manual is possible.

●Please describe the following warning to the manual.

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

03 April 2015

17