Motorola MBP87SN User Manual

USER’S GUIDE

Smart Air Purifier

M

odel: MBP87SN

The features described in this guide are subject to modifications without prior notice.

This User’s Guide has all the information you need to make the most
out of your product.
Please read the Safety Instructions on page 6 before you install the
unit.

Inside the Box

• 1 x Air Purifier with Activated Carbon and True HEPA Filters
installed

• 1 x Quick Start Guide

Welcome...

to your new Motorola Smart Air Purifier MBP87SN!

Thank you for purchasing your new Motorola Smart Air Purifier!
You can manage the device both locally and remotely via Hubble for
Smart Nursery App. The device features the following functions:

• True HEPA Filter for removing 99.97% of airborne particles including
allergens, pollen, dust mites and pet dander;

• UV-C Lamp for removing airborne bacteria, viruses and germs;

• Soothing Night Light;

• Child Lock for safe operation.

The Smart Air Purifier freshens your baby’s room.
Please keep your original dated sales receipt for your records. For

warranty service of your Motorola product, you will need to provide a
copy of your dated sales receipt to confirm warranty status.
Registration is not required for warranty coverage.

For product related questions, please call:

US and Canada 1-888-331-3383

E-mail: [e-mail]

On the Web: www.motorolastore.com/support

1. Air Outlet

2. Control Panel (with LED

Backlight)

3. Air Quality Indicator

4. Air Inlet

5. Air Quality Sensor Door

Overview of the Air Purifier

2

4

3

5

1

Understand the Air Quality Indicator

Note:

The built-in air quality sensor measures the air quality and automatically
selects the appropriate color of the air quality light. When the air is clean, the
color of the air quality light is blue. When the air quality deteriorates, the color
of the air quality light changes to yellow or red.

Color of the air quality light Air quality level

Blue Good

Yellow Fair

Red Bad

Operation of the Touch Control Buttons

On/Off
Button

Toggle the button to turn the unit On or Off.

Pair Button When the unit is on, press and hold the button

for 5s to enter Pairing Mode to pair the unit with
your Wi-Fi router.

Child Lock
Button

This is to lock the buttons to prevent mis-use.
When the unit is on, press and hold the button
for 5s to enable the function.
To disable the function, press and hold the
button for 5s again.

Fan Speed
Button

Tap to cycle through the speed options (1, 2, 3 or
AUTO).
The selected speed (1, 2 or 3) illuminates in
white.
If AUTO is selected, the LED lights up in green.

Night Light
Button

When the unit is on, tap once to turn on the
night light at High intensity, tap twice to switch
to Low intensity, tap again to turn off.

UV Lamp
Button

Toggle the button to turn UV lamp On or Off.
If the backlight blinks, please replace the UV
lamp.
After replacing the lamp, press and hold the
button for 5s to resume the function.

HEPA Filter
Replace /
Reset Button

If the backlight blinks, please replace the HEPA
filter.
After replacing the filter, press and hold the
button for 5s to resume the function.

Table of contents 5

ENGLISH

Table of contents

1. Safety Instructions.................................................................................................6

2. System Requirements...........................................................................................9

3. Getting Started..................................................................................................... 10

3.1 Connect Air Purifier to Power Supply........................................................ 10

4. Connecting Devices ............................................................................................. 11

4.1 User Account and Air Purifier Setup on Android™ Devices................11

4.1.1 Download Hubble for Smart Nursery App ..............................11

4.1.2 Run Hubble for Smart Nursery App on Android™ device 12

4.1.3 Add Air Purifier to your Smart Nursery account .................13

4.2 User Account and Purifier Setup on iOS® Devices................................ 16

4.2.1 Download Hubble for Smart Nursery App ............................ 16

4.2.2 Run Hubble for Smart Nursery App on iOS® device .......... 16

4.2.3 Add Air Purifier to your Smart Nursery account .................17

5. Overview of Hubble App .................................................................................. 20

6. Recommendations for Use and Care ..............................................................22

7. Replace HEPA Filter and UV-C Lamp.............................................................23

7.1 Replace the HEPA Filter..................................................................................23

7.2 Checking and Maintaining the Filter.......................................................... 24

7.3 Replace the UV Lamp.......................................................................................25

7.4 Clean the Air Quality Dust Sensor...............................................................27

8. Troubleshooting...................................................................................................28

9. Disposal of the Device (Environment) ...........................................................32

10. General Information ............................................................................................33

11. Technical Specifications ....................................................................................39

6 Safety Instructions

1. Safety Instructions

READ AND SAVE THESE INSTRUCTIONS.

WARNING

This product is compliant with all relevant electromagnetic field
standards and is, when handled as described in the User’s Guide, safe
to use. Therefore, always read the instructions in this User’s Guide
carefully before using the device, and save it for later use.

• This product is not a toy. Do not allow children to play with it.

• The air purifier is intended for indoor use only. Do not operate the
air purifier outdoors.

• Make sure that all filters are properly installed before you switch on
the unit.

• Always turn the appliance off before unplugging it.

• Always disconnect the unit by unplugging it from the electrical
outlet before moving or cleaning the unit, opening the grill,
changing the filters and whenever the unit is not in use.

• To disconnect the unit, be sure to pull the plug and not the cord.

• Plug the appliance directly into a 120V~ electrical outlet. When it is
plugged into a 220V electrical outlet, the unit will not function but
will buzz to remind you to change to an electrical outlet with the
right voltage of 110-120V.

• Keep the cord out of heavy traffic areas.

• To avoid fire hazard, NEVER put the cord under rugs, near heat
registers, radiators, stoves, or heaters.

• To protect against electrical hazards, DO NOT immerse the
appliance in water or other liquids. Do not use near water.

• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.

• Cleaning and user maintenance shall not be performed by children
without supervision.

• This appliance contains a UV-C emitter.

• The appliance must be disconnected from the electrical outlet
before replacing the UV-C emitter.

• Unintended use of the appliance or damage to the housing may
result in the escape of dangerous UV-C radiation. UV-C radiation
may, even in little doses, cause harm to the eyes and skin.

• Appliance that are obviously damaged must not be operated.

Safety Instructions 7

ENGLISH

• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid hazard.

• DO NOT attempt to repair or adjust any electrical or mechanical
functions on this unit. Doing so will void your warranty. The inside
of the unit contains no user serviceable parts. All servicing should
be performed by the manufacturer or its service agent.

• Place the air purifier on a smooth, level surface, such as a table.

• NEVER place the appliance on a soft surface, such as a bed or
sofa, as this could cause the unit to tip over and block the air inlet
or outlet grills.

• Do NOT place anything on top of the unit.

• NEVER drop or insert any objects into the air inlet and outlet of
the unit.

• Do NOT run cord under carpeting.

• Always handle the air purifier with dry hands to avoid electric
shock.

• Do NOT use this appliance when you have used indoor smoke­type insect repellents or in places with oil residues, burning
incense, or chemical fumes.

• Do NOT use the appliance in a room with major temperature
changes, as this may cause condensation inside the appliance.

• Do NOT use the appliance in wet surroundings with high ambient
temperatures, such as the bathroom, toilet, or kitchen.

• Do NOT place the appliance directly below an air conditioner to
prevent condensation from dripping onto the appliance.

• Keep the appliance away from heated surfaces and open flames.

• To prevent interference, place the appliance at least 2 m (6.6 feet)
away from electrical appliances that use airborne radio waves such
as TVs, radios, and radio-controlled clocks.

• Do NOT use gasoline, benzene, thinner, harsh cleaners, etc. on
and/or in the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.

• The unit is only intended for household use as described in this
User’s Guide. Any other use not recommended by the
manufacturer may cause fire, electric shock or injury to persons.

• Keep this User’s Guide for future reference.

8 Safety Instructions

Important guidelines for installing Air Purifier

• Use of other 2.4 GHz products, such as other wireless networks,
Bluetooth® systems or microwave ovens may cause interference
with this product. Keep the Air Purifier away from these types of
products, or turn them off if they appear to be causing
interference.

• Always ensure that you have a good Wi-Fi® connection available.

System Requirements 9

ENGLISH

2. System Requirements

Smartphones/Tablets: Android™ and iOS® only.
System Requirement: iOS 8.0, Android™ 4.4.2 or higher
For more information please visit:

https://hubbleconnected.com/requirements

10 Getting Started

3. Getting Started

3.1 Connect Air Purifier to Power Supply

1. Connect the Smart Air Purifier to the electrical outlet.

2. The Power ON/OFF button will light up momentarily and the

backlight will stay on for 5s then goes off. It will light up again
when you tap to turn on the Air Purifier.

Connecting Devices 11

ENGLISH

4. Connecting Devices

How Does It Work?

When a user tries to access the Air Purifier, our Smart Nursery server
authenticates the user’s identity and permits access.

Note

You can only setup via a compatible smartphone or tablet and not via
a PC.

4.1 User Account and Air Purifier Setup on Android™
Devices

What you need

• Smart Air Purifier

• Device with AndroidTM system 4.4.2 or higher

4.1.1 Download Hubble for Smart Nursery App

• Go to Google Play™ Store to search for Hubble for Smart

Nursery.

• Download Hubble for Smart Nursery App and install it on your

Android™ device

Access your Air
Purifier locally

Access your Air Purifier from any
compatible device remotely

Wi-Fi Router

Smart Nursery

Server

MBP87SN

12 Connecting Devices

4.1.2 Run Hubble for Smart Nursery App on Android™
device

• Ensure that your Android™ Device is connected to the Wi-Fi

®

router or mobile network.

• Run Hubble for Smart Nursery App, tap SIGNUP and follow the

in-app instructions to create your Smart Nursery Account. By
signing up, you agree to our Terms & Conditions. (Pictures A1 &
A2)

Note

If you already have a Smart Nursery App account, please tap LOGIN
by entering your account information and go to the next steps.

A1

A2

Connecting Devices 13

ENGLISH

4.1.3 Add Air Purifier to your Smart Nursery account

• Switch on your Air Purifier, then press and hold the Pair Button
to enter Wi-Fi pairing/ setting mode.

• Tap on Smart Ai Purifier or press Add Device then tap on Smart
Air Purifier to enter Purifier setup mode. (Picture A3)

• Tap on Skip to Setup, then tap Next to search for Smart Air
Purifier. (Pictures A4 & A5)

A3

A4

A5

14 Connecting Devices

• The device SSID can be found on your Android™ Device. Tap the
SSID to confirm. (Picture A6)

• Air Purifier is detected. Tap Next to proceed to the next step.
(Picture A7)

• You need a Wi-Fi

®

network to connect to your Air Purifer. Tap

Search to start network searching. (Picture A8)

A6

A7

A8

Connecting Devices 15

ENGLISH

• Select a Wi-Fi® network from the network list, enter Wi-Fi

®

password and then tap Submit. (Picture A9)

• It will take a few minutes for Air Purifier to connect to the Wi-Fi

®

network. Tap Get Started when Air Purifier is successfully
connected to Hubble for Smart Nursery App. (Pictures A10 & A11)

Note

If you fail to complete the setup process, press and hold the Pair
Button until the backlight blinks to enter registration mode and repeat

the above steps again.

A9

A10

A11

16 Connecting Devices

4.2 User Account and Purifier Setup on iOS® Devices

What you need

• Smart Air Purifier

• Device with iOS® 8.0 or higher

4.2.1 Download Hubble for Smart Nursery App

• Go to App Store to search for Hubble for Smart Nursery.

• Download Hubble for Smart Nursery App and install it on your
iOS

®

device

4.2.2 Run Hubble for Smart Nursery App on iOS® device

• Ensure that your iOS® device is connected to the Wi-Fi® router or
mobile network.

• Run

Hubble for Smart Nursery

App, tap

SIGNUP

and follow the in-

app instructions to create your

Smart Nursery

Account. By signing

up, you agree to our Terms & Conditions. (i1 & i2)

Note

If you already have a Smart Nursery App account, please tap LOGIN
by entering your account information and go to the next steps.

i1

i2

Connecting Devices 17

ENGLISH

4.2.3 Add Air Purifier to your Smart Nursery account

• Switch on your Purifier, then press and hold the Pair Button to
enter Wi-Fi pairing/ setting mode.

• Tap on Smart Air Purifier to enter Purifier setup mode. (Picture
i3)

• Skim over the main features of your Purifier, then tap Skip To
Setup. (Picture i4)

• The following setup instructions will appear on the screen. (Picture
i5)

• Follow the on-screen instructions.

i4

i3

i5

i6

18 Connecting Devices

• Go to Settings > Wi-Fi menu on your iOS® device. (Pictures i6)

• Select the SSID of your Air Purifier from the list of networks.
(Pictures i8)

• Return to the Smart Nursery App to resume setup.

• Select your Wi-Fi

®

network and tap Search. (Picture i10)

• Enter your Wi-Fi® password and tap OK. (Picture i11)

i7

i8

i10

i11

i9

Connecting Devices 19

ENGLISH

• It will take a few minutes for Air Purifier to connect to the Wi-Fi

®

network before showing the connection status. (Pictures i12)

Note

If you fail to complete the setup process, press and hold the Pair
Button until the backlight blinks to enter registration mode and

repeat the above steps again.

i12

20 Overview of Hubble App

5. Overview of Hubble App

Fan Speed
Button
(AUTO, 1, 2, 3)

Tap to select the speed level (1 - 3
or Auto)

Child Lock Tap to activate and deactivate the

child lock feature.

Night Light Toggle the button to turn On night

light, select "Fully Bright Light",
"Half Bright Light" or turn Off night
light.

Air Quality
Status View

The built-in air quality sensor
measures the air quality and
automatically selects the
appropriate color of the air quality
light.
The following colors represent the
measured air quality:
Blue = good air quality
Yellow = fair air quality
Red = bad air quality

UV Lamp Change
Reminder / Reset
Button

• Toggle the button to turn UV
lamp On or Off.

• Message appears when it’s time
to replace the lamp.
Turn off and unplug the unit.
Replace the lamp according to
directions, then press and hold
UV Lamp button (control panel)
for 5s to resume the function.

HEPA Filter
Change
Reminder / Reset
Button

Message appears when it’s time to
replace the HEPA Filter.
Turn off and unplug the unit.
Replace the filter according to
instructions, then press and hold
the button (control panel) for 5s to
resume the function.

Overview of Hubble App 21

ENGLISH

Motorola
Shopping Cart

By tapping on the button, you will
be directed to Motorola website
where you can shop for
replacement HEPA filter, UV-C
lamp and other products.

22 Recommendations for Use and Care

6. Recommendations for Use and Care

• The appliance is only intended for household use as described in
this manual. Any other use not recommended by the manufacturer
may cause fire, electric shock or injury to persons.

• During operation, NEVER block the air openings, grills/ outlets of
the unit or place the unit on a soft surface such as a bed or sofa, as
this could cause the unit to tip over, blocking the air inlet or outlet
openings.

• Before replacing the true-HEPA filter or UV lamp, make sure that
you unplug the air purifier from the electrical outlet in order to
prevent electric shock.

• Use a clean, dry, soft cloth to wipe the external surface of the unit.

• Do NOT let the area around the air purifier to become damp or
wet. Please do NOT immerse the device into water or other liquids
in order to prevent electrical hazards.

• Clean the air purifier according to instructions when the product
will not be in frequent use. Before storage, make sure that all the
parts are clean and dry. Store the air purifier in a dry place. After
storage, clean the air purifier again and remove any dust on the
outside.

• Please do NOT operate the appliance with a damaged cord or
plug. If the motor fan fails to rotate, OR if the device has been
dropped or damaged in any manner, leading to appliance
malfunction, DO NOT operate it to prevent risks of harm or injury.

• The unit may cause interference to other nearby 2.4 GHz products,
such as other wireless networks Bluetooth systems or microwave
ovens during operation. Keep the air purifier away from these
types of products, or turn them off if there is interference.

• Every effort has been made to ensure high standards of reliability
of your air purifier. However, if something does go wrong, please
do not try to repair it yourself - contact Customer Service for
assistance.

Replace HEPA Filter and UV-C Lamp 23

ENGLISH

7. Replace HEPA Filter and UV-C Lamp

You will be notified by the control panel backlight and the Smart
Nursery App when it’s time to change the activated carbon filter and
HEPA Filter.

7.1 Replace the HEPA Filter

Step 1 Turn off and unplug the unit.

Turn the bottom cover in an anticlockwise
direction to the position marked with an UNLOCK
icon as shown.

Step 2 / Step 3 Remove the bottom cover.

Step 4 Remove the HEPA filter.

Step 1

Step 2

Step 3

Turn anticlockwise

Step 4

Step 5

24 Replace HEPA Filter and UV-C Lamp

The white LED Filter Change Reminder will blink indicating that it’s
time to replace the filter.
Replace the HEPA filter according to the directions, then press and
hold button for 5s to resume the function.

7.2 Checking and Maintaining the Filter

• Maintain the Activated Carbon Filter and HEPA by checking it
frequently.

• When the filter turns from white to gray or black, it should be
replaced.

• Depending on the air quality conditions, you may need to replace
it more frequently.

IMPORTANT:

Do NOT attempt to wash and re-use the combination filter. Please
contact service at 1-888-331-3383 or visit our website:
www.motorolastore.com to purchase a replacement filter.

NOTE:

The True HEPA and Activated Carbon Filter are combined as a single
filter unit. The multi layers include the True HEPA/Activated Carbon
filter.

Step 5 Install a new HEPA filter in the correct position.

Step 6 Put the bottom cover back to the unit and turn in a

clockwise direction to the position marked with a
LOCK icon as shown.

Step 6

Turn clockwise

Replace HEPA Filter and UV-C Lamp 25

ENGLISH

7.3 Replace the UV Lamp

Step 1 Turn off and unplug the unit.

Turn the bottom cover in an anticlockwise
direction to the position marked with an
UNLOCK icon as shown.

Step 2 / Step 3 Remove the bottom cover.

Step 4 Remove the true-HEPA filter.
Step 5 Lift up the metal bracket in the UV Lamp

compartment until it is upright.

Step 1

Step 2

Step 3

Turn anticlockwise

Step 4

Step 5

Lift up the metal
bracket.

26 Replace HEPA Filter and UV-C Lamp

Note

The UV Change Reminder LED blinks to indicate that it’s time to
replace the lamp. Replace the lamp according to the instructions, then
press and hold the button for 5s to resume the function.

Warning!

UV radiation is dangerous for the eyes and skin.
Do not operate emitter outside the appliance.
To prevent safety issues, only factory specified UV lamps are allowed

for replacement.

(UV lamp spec: Type: E17, Model: UVCH3S17*53, Voltage: 11V,
Wattage: 3.5W).

Replacement of UV C Lamp: Please contact service at 1-888-331-3383
or visit our website: www.motorolastore.com/support to purchase a
replacement lamp.

Step 6 Hold the end of the lamp*, then unscrew it until it

completely detaches from the holder.

* HANDLE THE GLASS LAMP WITH CARE.

Replace a new UV lamp by screwing it back to the
holder until it is fastened.
Close the metal bracket all the way until it touches
the bottom of the compartment.

Step 7 Put the bottom cover back to the unit and turn in a

clockwise direction to the position marked with a
LOCK icon as shown.

Step 6

Step 7

Turn clockwise

Replace HEPA Filter and UV-C Lamp 27

ENGLISH

7.4 Clean the Air Quality Dust Sensor

Cleaning Method:

Note

When the Night Light blinks for 1 minute, this is to remind you that the
air quality sensor needs to be cleaned (typically after 1,500 hours of
operation). After cleaning is done, press and hold the Night Light
Button for 5s to reset the reminder indicator.

The reminder will repeat every 24 hours if the indicator is not reset
properly.

Step 1 Open the air quality sensor door.
Step 2 Clean the lens and dust inlet/outlet with a lightly

moistened cotton swab. Afterwards, dry the lens and
dust inlet/outlet with a dry cotton swab.

Step 3 Close the air quality sensor door.

Step 1 Step 2

Dust outlet

Lens

Dust inlet

28 Troubleshooting

8. Troubleshooting

Problem
Category

Problem
Description / Error

Solution

Account I am unable to login

even after
registration.

Please check your user name
and password.

Account What do I do if I

forget my
password?

Click on the "Forgot Password"
link on https://
app.hubbleconnected.com/
#lostpassword OR on your
Android™ or iOS application. An
e-mail will be sent to your
registered e-mail address.

Account I am unable to

receive a new
password although I
have used the
"Forgot password"
option.

1. The e-mail might have been
sent to your Junk Mail
Folder. Please check your
Junk Mail Folder.

2. There might be a delay in
getting your e-mail. Please
wait a few minutes and
refresh your e-mail account.

Account I receive an error

message saying: "E­mail ID is not
registered".

Please ensure that you have
registered with us. Tap SIGN UP
to create an account.

Connectivity
Issues

I get a message: We
are having problems
accessing your
Device. This could
be due to the lack of
an internet
connection. Please
wait and try again
later.

1. Please try again in a few
minutes. This could be
because of any issue with
your internet connection.

2. If the problem remains,
please restart your Device to
check if this fixes the
problem.

3. Please restart your Wireless
Router.

Troubleshooting 29

ENGLISH

Connectivity
Issues

I am not able to
access my device.

Please check if the Device is
within Wi-Fi range. If the LED on
your Device is flashing slowly,
please try to move the Device
closer to the router for better
Wi-Fi connectivity and try again.

Functions The unit will not

operate.

1. Please check and make sure

that the unit is properly
plugged in and the power
outlet is energized.

2. Please make sure that the

unit has been turned ON.

3. Please check and make sure

that the filter is properly
installed and the rear grill is
seated correctly.

Functions The airflow that

comes out of the air
outlet is significantly
weaker than before.

1. Please make sure that

nothing is blocking the air
inlet and filtered air outlets.

2. Please check the filter

condition and replace it if
necessary.

3. Please check if you have

removed all packaging
material.

4. The air quality sensor is wet.

The humidity level in your
room is high and causes
condensation. Make sure
that the air quality sensor is
clean and dry (see 7.4 Clean
the Air Quality Dust Sensor)

Functions Why I hear

excessive noise
during device
operation?

1. Please check and make sure

that the parts are firmly
positioned in place.

2. Please check if you have

removed all the packaging
material from the HEPA
filter.

30 Troubleshooting

Functions The air purifier still

indicates that I need
to replace the filter;
but I already did.

Perhaps you did not press the
HEPA Filter Change Reminder /
Reset Button .

Plug in the air purifier, press the
ON/OFF button and press and
hold (control panel) for 5
seconds.

Functions The UV lamp button

has been on
continuously.

Please replace the UV lamp
according to the instructions in
the User’s Guide and hold down
the UV lamp button (control
panel) for 5s to reset the system.

Functions Why is the night

light continuously
blinking?

It’s a reminder to clean the “air
quality sensor”, see 7.4 “Clean
the Air Quality Dust Sensor”.

Installation The bottom cover

doesn't seem to fit
with the main unit.

Make sure that the bottom cover
is at the LOCK position.

Power
indication
light off;
does not
work

No power supply Connect the unit to power

supply and switch on.

General Which platforms are

supported for
accessing my
Device?

Minimum requirement:
Android™ 4.4.2
iPhone /iPad iOS version 8.0

Troubleshooting 31

ENGLISH

General How do I download

the App for
Android™ and iOS
devices?

Android™:

- Open the Google Play on your
Android™ device.

- Select Search

- Type in "Hubble for Smart

Nursery"

- The results will show the
Hubble App

- Select to install it

iOS Device:

- Open the App Store

SM

- Select Search

- Type in "Hubble for Smart

Nursery"

- The results will show the
Hubble App

- Select to install it

32 Disposal of the Device (Environment)

9. Disposal of the Device
(Environment)

At the end of the product life cycle, you should not
dispose of this product with normal household waste.
Take this product to a collection point for the recycling
of electrical and electronic equipment. The symbol on
the product, user's guide and/or box indicates this.

Some of the product materials can be re-used if you
take them to a recycling point. By reusing some parts or raw materials
from used products you make an important contribution to the
protection of the environment.

Please contact your local authorities in case you need more
information on the collection points in your area.

General Information 33

ENGLISH

10. General Information

If your product is not working properly....

1. Read this User's Guide.

2. Visit our website: www.motorolastore.com/support

3. Contact Customer Service at

Consumer Products and Accessories Limited Warranty
("Warranty")

Thank you for purchasing this Motorola branded product
manufactured under license by Binatone Electronics International Ltd
("BINATONE").

What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that
this Motorola branded product ("Product") or certified accessory
("Accessory") sold for use with this product is manufactured to be
free from defects in materials and workmanship under normal
consumer usage for the period outlined below. This Warranty is your
exclusive warranty and is not transferable.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR
COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER
PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF
PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE,
THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN
ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH
CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL
UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE
LAWS OF YOUR COUNTRY, PROVINCE OR STATE.

Who is covered?

This Warranty extends only to the first consumer purchaser, and is
not transferable.

What will BINATONE do?

BINATONE or its authorized distributor at its option and within a
commercially reasonable time, will at no charge repair or replace any
Products or Accessories that does not conform to this Warranty. We
may use functionally equivalent reconditioned/ refurbished/ pre­owned or new Products, Accessories or parts.

US and Canada 1-888-331-3383

E-mail: [e-mail]

34 General Information

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR
OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND
IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE
LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE
PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY
KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,
LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.

Some jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length of an
implied warranty, so the above limitations or exclusions may not
apply to you. This Warranty gives you specific legal rights, and you
may also have other rights that vary from one jurisdiction to another.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and replacement

Products Covered Length of Coverage

Consumer Products One (1) year from the date of the

Products, original purchase by the
first consumer purchaser of the
product.

Consumer Accessories Ninety (90) days from the date of

the Accessories, original purchase
by the first consumer purchaser of
the product.

Consumer Products and
Accessories that are Repaired
or Replaced

The balance of the original
warranty or for Ninety (90) days

from the date returned to the
consumer, whichever is longer.

General Information 35

ENGLISH

of parts due to normal wear and tear are excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a) improper

operation, storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the
product resulting from misuse; (b) contact with liquid, water, rain,
extreme humidity or heavy perspiration, sand, dirt or the like, extreme
heat, or food; (c) use of the Products or Accessories for commercial
purposes or subjecting the Product or Accessory to abnormal usage
or conditions; or (d) other acts which are not the fault of MOTOROLA
or BINATONE, are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or certified
Products or Accessories or other peripheral equipment are excluded
from coverage.

Unauthorized Service or Modification. Defects or damages resulting
from service, testing, adjustment, installation, maintenance,
alteration, or modification in any way by someone other than
MOTOROLA, BINATONE or its authorized service centers, are
excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers or
date tags that have been removed, altered or obliterated; (b) broken
seals or that show evidence of tampering; (c) mismatched board
serial numbers; or (d) nonconforming or non-Motorola branded
housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of
Products or Accessories due to any communication service or signal
you may subscribe to or use with the Products or Accessories is
excluded from coverage.

36 General Information

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

You will receive instructions on how to ship the Products or
Accessories at your expense and risk, to a BINATONE Authorized
Repair Center.

To obtain service, you must include: (a) the Product or Accessory; (b)
the original proof of purchase (receipt) which includes the date, place
and seller of the Product; (c) if a warranty card was included in your
box, a completed warranty card showing the serial number of the
Product; (d) a written description of the problem; and, most
importantly; (e) your address and telephone number.

These terms and conditions constitute the complete warranty
agreement between you and BINATONE regarding the Products or
Accessories purchased by you, and supersede any prior agreement
or representations, including representations made in any literature
publications or promotional materials issued by BINATONE or
representations made by any agent employee or staff of BINATONE,
that may have been made in connection with the said purchase.

Responsible Party in the USA

US and Canada 1-888-331-3383

E-mail: [e-mail]

Legal Company Name: Binatone North America
Address: 11550 North Meridian Street, Suite

525

Carmel, IN 46032
Phone, Fax: [phone]
E-mail address: [e-mail]
Contact Person: Mert Ulusoy

General Information 37

ENGLISH

FCC and IC regulations

FCC Part l5
NOTE:

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by

the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Caution:

To maintain compliance with the FCC’s RF exposure guideline,
place the base unit at least 20 cm from nearby persons.
To ensure safety of users, the FCC has established criteria for the amount
of radio frequency energy that can be safely absorbed by a user or
bystander according to the intended usage of the product. This product
has been tested and found to comply with the FCC criteria.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/NMB-3(B)
This equipment has been certified to comply with ETL US/Canada safety
standard in accordance with UL 998 and Canadian National Standard,
CSA C22.2 No. 104-11, (Bi-National Standard, same as UL 998).

38 General Information

WARNING

Changes or modifications, to this equipment not expressively
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

The socket-outlet shall be installed near the equipment and shall be
easily accessible.

Industry Canada

This device complies with Industry Canada licence-exempt RSS
standard(s): Operation is subject to the following Two conditions:(1)
this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.

The term "IC: " before the certification/registration number only
signifies that the Industry Canada technical specifications were met.
This product meets the applicable Industry Canada technical
specifications.

Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.

Technical Specifications 39

ENGLISH

11. Technical Specifications

Connectivity 2.4GHz Wi-Fi® 802.11 b/g/n
Standby power

consumption

less than 2 W

Operating Temperature 41oF - 104oF (5 °C - 40°C)
Rated Voltage/Frequency AC120V / 60Hz
Power Hi-speed 45W±20%

Me-speed 37W±20%

Lo-speed 25W±20%
UVC (Ultraviolet C) 3W – 253.7nm, hot cathode UVC lamp
Activated Carbon Filter and

True HEPA Filter

Yes - replaceable

Noise Low ≤ 40 dB; Mid ≤ 50 dB; High ≤ 60 dB

Manufactured, distributed or sold by Binatone Electronics
International LTD., official licensee for this product. MOTOROLA and
the Stylized M logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. and are used under license.
Apple logo is a trademark of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc. Google
Play and Android are trademarks of Google Inc. Wi-Fi is a trademark
of the Wi-Fi Alliance. All other trademarks are the property of their
respective owners. © 2017 Motorola Mobility LLC. All rights reserved.

US_EN Version 1.0
Printed in China

3131342