Motorola DRC450 User Manual
OVERVIEW
The Motorola DRC450 universal remote
will control up to four devices,including
Motorola's interactive digital terminals*,
most TVs,VCRs, Amplifiers, DVD players,
PVRs, Tuners, and CD players.
*NOTE: Digital models include the DCT1000,
DCT1200, DCT1700, DCT2000, DCT2500, and
DCT5100. The DRC450 can also control older
Motorola analog models like the CT1900,
CFT2100, CFT2200, and CFT3300.
The DRC450 requires two new AA
alkaline batteries (included) and has
easy programming to control your
Motorola interactive digital terminal,as
well as all of the basic functions of your
other original remote controls. Moreover,
the DRC450 helps eliminate the need to
use multiple remote controls.
For best results, please read and perform
all instructions listed herein.Also,keep
these instructions for future reference.
FEATURES AND FUNCTIONS
Use the DRC450 mode keys (i.e.,AUDIO,
VCR/DVD, CABLE,or TV) to control a
specific device. When pressed,the
selected mode key will light,confirming
your choice. Use the other keys to perform desired actions (see the following
key chart).
NOTE: The selected mode will remain active
until you press another mode key.
Press AUDIO,VCR/DVD,
CABLE,or TV once to
control a device.
Press POWER once to
turn on or off the
selected home entertainment device.
Press HELP once to
display the help screen.
Press MUTE once to
turn sound off or on.
Use PAGE
▲ (or PAGE ▼)
to page up (or down)
through menu screens
and the electronic
program guide.
Use LOCK** to restrict
viewing of selected
programs (Parental
Control).
Use EXIT to exit menu
or guide.
Use INFO to display
current channel and
program information.
Use these keys to move
the cursor in the electronic program guide
and menu screens.
Use OK** to chose menu
options,PPV events,
and to tune programs
from the electronic
program guide.
Use GUIDE to display
the electronic program
guide.
Use MENU to display
the main menu.
In TV or CABLE mode,
use VOLUME + (or
VOLUME
-
) to raise (or
lower) sound volume.
Use CHANNEL + (or
CHANNEL
-
) to select
the next higher (or
lower) channel.
Use LAST to recall last
channel or go back one
screen in the menu.
In the CABLE mode,
press FAVORITE once
to display programmed
favorite cable channels.
These functions are
set by your cable
system operator.
Use the keypad (0 ~ 9)
to directly select the
channels (e.g., 09 or
0 31) .
Press TV/VCR BYPASS
once to switch VCR to
view TV or tape (not
supported by all
applications).
Use ENTER/MUSIC to
display menu of digital
music channels, or to
enter channels on
some TV models.
In the VCR/DVD and TV
modes, use the STOP,
PAUSE, PLAY,REW.,
and F.FWD. keys to
control a VCR (or DVD
player).To record
a program on a VCR,
press RECORD once.
In the CABLE mode,
press DAY> (or <DAY)
once to move the
electronic program
guide ahead (or back)
24 hours.
**NOTE: Functionality of the LOCK and OK
keys are dependent on the software and the
model of Motorola interactive digital terminal.
INSTALLING BATTERIES
1. On the DRC450’s back,pull back
the battery cover and remove it.
2. Use the two (2) supplied fullycharged AA alkaline batteries.
Match their + and -marks to the
+ and
-
marks in the battery case,
then insert the batteries.
3. Push the battery cover back
into place.
4. Test the unit by pressing POWER
and any mode key (e.g.,AUDIO,
VCR/DVD, CABLE,or TV). If the
batteries are inserted correctly, the
selected mode key will be lit.
NOTE:When a selected mode key blinks two
times with each key press,this indicates that
the batteries are getting low. Replace them
within 20 minutes;otherwise the DRC450 may
lose its settings and require reprogramming.
PROGRAMMING A SPECIFIC
DEVICE CONTROL
The DRC450 is preprogrammed at the
factory to operate a RCA TV and VCR
(or DVD player),a Motorola (General
Instrument) interactive digital terminal,
and a Pioneer audio device.To control
devices other than the default brands,
perform the following steps; otherwise
skip this section:
NOTE: For programming TV/VCR Combo
control,see the next section.
1. Turn on a device (e.g.,VCR) and, if
applicable, insert media, (e.g.,
cassette or disc).
NOTE: Please read steps 2-4 completely
before proceeding. Highlight or write
down the codes and device you wish to
program before moving on to step 2.
2. On the DRC450,press and hold a
mode key (i.e.,AUDIO, VCR/DVD,
CABLE,or TV) for at least 6 seconds,
until you see the programming
mode start. Each mode key light
will turn off and on sequentially,
starting with AUDIO on through TV,
and the sequence will repeat twice.
At this time,release the mode key
and wait until it’s lit continuously.
3. Locate the code for your device in
Manufacturer’s Codes on the back
of this user guide. Brands are listed
in alphabetical order with the most
popular codes listed first.
4. Enter the first four-digit code for
your device.If you perform this
procedure correctly,the selected
mode key will blink three times.
NOTE: If you enter an invalid code, the
selected mode key will turn off.Repeat
steps 2 through 4 with a valid code.
5. Aim the DRC450 at your device
and press POWER once.The device
should turn off. If it does not
respond,repeat steps 2-4, trying
each code listed for your brand
until you find one that works.If it
still does not work,try Searching
For Your Co de.
NOTE: If the device does not have a
POWER key, press the (Play) key.
6. For future reference,write your
device code in the appropriate
boxes below:
AUDIO Code:
Device Type:______________
VCR/DVD Code:
Device Type:______________
CABLE Code:
TV Code:
7. Repeat steps 1 through 6 for each
device you want to control.
PROGRAMMING
TV/VCR COMBO CONTROL
1. Turn on the TV/VCR Combo and
insert a video cassette.
NOTE: Please read steps 2-4 completely
before proceeding. Highlight or write
down the codes and device you wish to
program before moving on to step 2.
2. On the DRC450,press and hold a
VCR/DVD for at least 6 seconds,
until you see the programming
mode start. Each mode key light
will turn off and on sequentially,
starting with AUDIO on through TV,
and the sequence will repeat twice.
At this time,release VCR/DVD and
wait until it’s lit continuously.
3. Locate the code for your device in
Setup Codes For TV/VCR Combos
on the back.Brands are listed in
alphabetical order with the most
popular codes listed first.
4. Enter the first four-digit code for
your device.If you perform this
procedure correctly,VCR/DVD will
blink three times.
NOTE: If you enter an invalid code,
VCR/DVD will turn off. Repeat steps 2
through 4 with a valid code.
5. Aim the DRC450 at the TV/VCR
combo and press POWER once.
The device should turn off. If it
does not respond,repeat steps 2-4,
trying each code listed for your
brand until you find one that
works.If it still does not work,try
Searching For Your Code.
NOTE: If the device does not have a
POWER key, press the (Play) key.
NOTE: If you’ve located a TV/VCR code
that works, but it has a separate TV
code, you’ll also need to program it into
DRC450 to access volume control.
Perform the steps in “Programming
Device Control”and use TV for the mode
key (e.g., press and hold TV).
6. For future reference,write your
device codes in the boxes below:
TV/VCR Combo Code:
TV Code (if used):
SEARCHING FOR YOUR CODE
If your home entertainement device does
not respond to the DRC450 after trying
all of the codes listed for your brand,or
if your brand is not listed at all,try
searching for your code.
For example, after trying all of the codes
for your TV, you still cannot get the
DRC450 to operate your TV, then:
1. Turn on your TV.
2. On the DRC450,press and hold TV
(at least 6 seconds) until you see
the programming mode start.Each
of the mode key lights will turn off
and on sequentially,starting with
AUDIO on through TV,and the
sequence will repeat twice. During
this time, release TV and wait until
it’s lit continuously.
3. Press the (Up) cursor key once
to start the search mode.
NOTE: In the search mode,the DRC450
will send IR codes from its library to the
selected component, starting with the
most popular codes first. When the
device responds to a subsequent key
command (e.g.,POWER), the correct
device code will be found.
4. Press POWER once. The TV key will
light on and off,showing that an
IR code has been sent.
5. If your television does not turn off,
press the (Up) cursor key once
again to call up the next IR code
and press POWER once again.
6. If your television still does not
turn off, repeat step 5 as many
times as needed until your TV
turns off.
7. When your television does turn off,
a working code has been found.
Press OK once to save the code and
the TV key will blink three times,
confirming the selection.
8. To search for the codes of your
other devices,repeat steps 1
through 7,but substitute the
appropriate mode key (i.e.,
VCR/DVD, CABLE, or AUDIO) for the
device you are searching for.
CHECKING THE CODES
If you have set up the DRC450 using the
Searching For Your Code procedure, you
may need to find out which four-digit
code is operating your equipment.
Perform the following procedure after
you have set up your devices to find out
which four-digit code is operating your
equipment.For example, to find out
which code is operating your TV:
1. Turn on your TV.
2. On the DRC450,press and hold TV
(at least 6 seconds) until you see
the mode light sequence start.
Each of the mode key lights will
turn off and on sequentially,starting with AUDIO on through TV,and
will repeat twice. During the
sequence,release the TV key and
wait until it stays lit continually.
3. Press 9 - 9 - 0.The TV key will
blink three times.
4. To view the code for the first digit,
press and release 1.Count the
number of TV key blinks (e.g.,3
blinks = 3) and write down the
number in the leftmost TV code
box in step 6 of Programming
Device Control.
NOTE: The mode key will not blink if
the code digit is a “0”.
5. Repeat step 4 three more times for
each successive digit by pressing
and releasing 2,3,and then 4.
Finish writing down the TV code
in the remaining TV code boxes.
6. To check for the codes of your
other devices, repeat steps 1
through 5,only substitute the
appropriate mode key (i.e.,
VCR/DVD, CABLE, or AUDIO) for the
device you are checking.Write
down the codes in the appropriate
device code boxes (see step 6 of
Programming Device Control).
CHANGING VOLUME LOCK
Your new DRC450 is set to control the
volume of a device through its associated
mode (i.e., through the Motorola
interactive digital terminal in the Cable
mode, through the TV in the TV mode,
through the VCR or DVD player in the
VCR/DVD mode, and through the audio
device in the Audio mode).If your TV is
not remote controllable, or if you would
like the volume to be controlled by a different device, you can change the Volume
Lock setting to control a volume through
a non-associated mode (e.g.,through
the Motorola interactive digital terminal
in the TV mode).
Changing the Volume Lock setting to
the Cable,VCR/DVD, or TV mode will
change the volume control for all modes
except Audio, which will continue to
control its own volume.If you change
the Volume Lock setting to the Audio
mode, all modes (i.e.,Audio., Cable,
VCR/DVD,and TV) will be controlled by
the Audio mode.
To Change The Volume Lock Setting
To Another Mode:
1. On the DRC450,press and hold a
mode key (i.e.,AUDIO, VCR/DVD,
CABLE,or TV) for at least 6 seconds,
until you see the programming
mode start. Each mode key light
will turn off and on sequentially,
starting with AUDIO on through TV,
and the sequence will repeat twice.
At this time,release the mode key
and wait until it’s lit continuously.
2. Press and release VOLUME +.
3. The mode key’s light will blink
three times, indicating volume has
been locked to the selected mode.
4. Now, whenever you press
VOLUME +, VOLUME
-
,or MUTE
on the DRC450,volume will be
controlled by selected mode,
independent of the current mode.
To Unlock Volume Lock:
1. On the DRC450,press and hold a
mode key (at least 6 seconds) until
you see the programming mode
start. Each mode key light will turn
off and on sequentially, starting
with AUDIO on through TV,and the
sequence will repeat twice. During
this time, release the mode key and
wait until it’s lit continuously.
2. Press and release VOLUME
-
.
3. The mode key light will blink three
times,indicating volume has been
unlocked for the selected mode.
4. Now, whenever you press
VOLUME +, VOLUME
-
,or MUTE on
the DRC450,the volume controls
will reset to their original device.
TROUBLESHOOTING
PROBLEM: A mode key does not
blink or blinks 2 times
when you press a key.
SOLUTION: Replace the batteries with
two (2) new AA alkaline
batteries.
PROBLEM: A mode key blinks when
you press a key, but home
entertainment component
does not respond.
SOLUTION: Make sure the DRC450 is
aimed at your home
entertainment device
and is not farther than
15 feet away.
continued on back...
Fold Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
DRC450
UNIVERSAL REMOTE CONTROL
MADE IN INDONESIA
USER GUIDE
Moto DRC450_Mnl 10/2/02 12:04 PM Page 1
TROUBLESHOOTING
(continued)
PROBLEM: DRC450 does not control
home entertainment
devices or commands are
not working properly.
SOLUTION: Try all listed codes for the
device brands being
set up. Make sure they
can be operated with an
infrared remote control.
PROBLEM: TV/VCR combo does not
respond properly.
SOLUTION: Use the VCR codes for
your brand. Some combo
units may require both a
TV code and a VCR code
for full operation.
PROBLEM: CHANNEL+ , CHANNEL
-
,
and LAST do not work for
your RCA TV.
SOLUTION: Due to RCA design (1983-
1987), only the original
remote control will
operate these functions.
PROBLEM: Changing channels does
not work properly.
SOLUTION: If original remote control
required pressing Enter
to change channels,press
ENTER on the DRC450
after entering the
channel number.
MANUFACTURER’S CODES
Setup Codes For Audio Amplifiers
Aiwa 0406
Carver 0269
Curtis Mathes 0300
Denon 0160
GE 0078
Harman/Kardon 0892
JVC 0331
Left Coast 0892
Linn 0269
Magnavox 0269
Marantz 0892, 0321, 0269
Nakamichi 0321
Optimus 0395,0300
Panasonic 0308
Philips 0892, 0269
Pioneer 0013, 0300
Polk Audio 0892, 0269
RCA 0300
Realistic 0395
Sansui 0321
Sony 0689, 0220
Soundesign 0078
Technics 0308
Victor 0331
Wards 0078, 0013
Yamaha 0354
Setup Codes For Audio Receivers
ADC 0531
Aiwa 1089, 1405, 0121,0158, 0189, 0405
Audiotronic 1189
Bose 1229
Capetronic 0531
Carver 1089, 1189, 0042,0189, 0360
Casio 0195
Clarinette 0195
Curtis Mathes 0080
Denon 1104, 1160, 0004
Emerson 0424
Fisher 0042, 0360
Garrard 0424,0463
Harman/Kardon 0110, 0189, 0891
Hewlett Packard 1181
JBL 0110
JVC 0074
Kenwood 1313, 1027, 1570,1569, 0027, 0042,
0186
Koss 0424
LXI 0181
Linn 0189
Lloyd’s 0195
MCS 0039
Magnavox 1089, 1189, 0189, 0195,0391, 0531
Marantz 1089, 1189, 0039,0189
Modulaire 0195
Motorola 1191
Musicmagic 1089
Nakamichi 0097
Onkyo 0135
Optimus 1023, 0042, 0080,0181, 0186, 0531,
0670, 0738, 0801
Panasonic 1518, 0039, 0309,0367
Penney 0195
Philips 1089, 1189, 1269,0189, 0391, 1120
Pioneer 1023, 0014, 0080,0150, 0244, 0531,
0630
Polk Audio 0189
Proscan 1254
Quasar 0039
RCA 1023, 1254, 0080, 0360,0531
Realistic 0181, 0195
Sansui 1089, 0189
Sanyo 0801
Sharp 0186
Sherwood 0491, 0502
Sony 1058, 1258, 1158, 0158,0474
Soundesign 0670
Stereophonics 1023
Sunfire 1313
Teac 0463
Technics 1308, 1309, 1518, 0039,0309
Thorens 1189
Victor 0074
Wards 0014, 0080, 0158, 0189
Yamaha 0176, 0186, 1176
Yorx 0195
Zenith 0857
Setup Codes For Cable Converters
(Interactive Digital Terminals)
Director 0476
General Instrument 0476
Jerrold 0476, 0276
Motorola 0476,0276
Supercable 0276
Setup Codes For CD Players
Aiwa 0157, 0124
Burmester 0420
California Audio Labs 0029, 0303
Carver 0157, 0179, 0437
DKK 0000
DMX Electronics 0157
Denon 0873, 0003
Emerson 0305
Fisher 0174, 0179
Garrard 0393, 0420
Genexxa 0032, 0305
Harman/Kardon 0157, 0173
Hitachi 0032
JVC 0072
Kenwood 0681, 0826, 0626,0028, 0037, 0190
Krell 0157
LXI 0305
Linn 0157
MCS 0029
MTC 0420
Magnavox 0157, 0305
Marantz 0626, 0029, 0157,0180
Miro 0000
Mission 0157
NSM 0157
Nikko 0174
Onkyo 0868, 0101
Optimus 1063, 0000, 0032,0037, 0145, 0179,
0305, 0420, 0437,0468
Panasonic 0029, 0303
Parasound 0420
Philips 0626, 0157
Pioneer 1063, 1062, 0032,0305, 0468
Polk Audio 0157
Proton 0157
QED 0157
Quasar 0029
RCA 1062, 0032, 0053, 0179,0305, 0468,
0764
Realistic 0179, 0180, 0420
Rotel 0157, 0420
SAE 0157
Sansui 0157, 0305
Sanyo 0179
Scott 0305
Sears 0305
Sharp 0861, 0037, 0180
Sherwood 1067, 0180
Sonic Frontiers 0157
Sony 0490, 0000, 0185
Soundesign 0145
Tascam 0420
Teac 0174, 0180, 0393,0420
Technics 0029, 0303
Victor 0072
Wards 0157, 0053
Yamaha 0888, 0036, 0187
Yorx 0461
Setup Codes For DVD Players
Aiwa 0641
Apex 0672, 0755
Blue Parade 0571
Denon 0490, 0634
Emerson 0591
Enterprise 0591
Fisher 0670
GE 0522, 0717
Go Video 0715
Gradiente 0651
Greenhill 0717
Harman/Kardon 0582
Hitachi 0573, 0664
Hiteker 0672
JVC 0558, 0623
Kenwood 0534, 0682
Konka 0711, 0719, 0720,0721
Magnavox 0503, 0675
Marantz 0539
Microsoft 0522
Mitsubishi 0521
NAD 0704
Onkyo 0503, 0627
Oritron 0651
Panasonic 0490, 0632, 0677
Philips 0503, 0539
Pioneer 0525, 0571, 0632
Princeton 0674
Proscan 0522
RCA 0522, 0571, 0717
Samsung 0573
Sanyo 0670
Sharp 0630
Sherwood 0633
Sony 0533
Technics 0490
Techwood 0692
Theta Digital 0571
Toshiba 0503
Urban Concepts 0503
Yamaha 0490, 0545
Zenith 0503, 0591
Setup Codes For TVs
A-Mark 0003
AOC 0030, 0019, 0003,0052, 0185
Abex 0032
Admiral 0093, 0463
Adventura 0046
Aiko 0092
Aiwa 0701
Akai 0030
Alaron 0179
Ambassador 0177
America Action 0180
Ampro 0751
Anam 0180
Anam National 0055
Archer 0003
Audiovox 0451, 0180, 0003, 0092, 0623
Baysonic 0180
Belcor 0019
Bell & Howell 0154, 0016
Bradford 0180
Brockwood 0019
Broksonic 0236,0463, 0003
CCE 0217
CXC 0180
Candle 0030, 0056, 0046, 0186
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451, 0092
Citizen 0060, 0030, 0056,0039, 0046, 0092,
0186, 0280
Clairtone 0185
Concerto 0056
Contec 0180, 0157, 0185
Craig 0180
Crosley 0054
Crown 0180, 0039
Curtis Mathes 0047, 0054,0154, 0051, 0451, 0093,
0060, 0030, 0145,0056, 0016, 0039,
0166, 0466, 0747,1147, 1347
Daewoo 0451, 0019, 0039,0092, 0623, 0624
Daytron 0019
Denon 0145
Dumont 0017, 0019
Dwin 0720, 0774
Electroband 0000, 0185
Electrohome 0381
Emerson 0154, 0236, 0463,0180, 0282, 0178,
0019, 0179, 0039,0038, 0177, 0185,
0280, 0623, 0624
Envision 0030
Fisher 0154, 0159
Fujitsu 0179, 0683
Funai 0180, 0179, 0171
Futuretech 0180
GE 0047, 0051, 0451,0093, 0282, 0178,
0021, 0055, 0027,0135, 0747, 1147,
1347
Gibralter 0017, 0030, 0019
GoldStar 0030, 0178, 0019, 0056, 0001,0032
Gradiente 0053, 0056
Grunpy 0180, 0179
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard 0180
Havermy 0093
Hitachi 0145, 0056, 0016,0032, 0038, 0151
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053
Janeil 0046
KEC 0180
KTV 0180, 0030,0039, 0185, 0217, 0280
Kaypani 0052
Kenwood 0030, 0019
Kloss 0024, 0046
Konka 0628, 0632, 0638,0703, 0707
LG 0056
LXI 0047, 0054, 0154, 0156,0178, 0747
Logik 0016
Luxman 0056
MEI 0185
MGA 0150, 0030, 0178, 0019
MTC 0060, 0030, 0019,0056, 0185
Magnavox 0054, 0030, 0179, 0020,0024, 0096,
0186, 0187, 0386,1254
Majestic 0016
Marantz 0054, 0030
Matsushita 0250
Megatron 0178, 0145, 0003
Memorex 0154, 0250, 0463, 0150, 0178,0179,
0056, 0016
Midland 0047, 0017, 0051, 0039, 0032,0135,
0747
Minutz 0021
Mitsubishi 0093, 0150, 0178, 0019
Motorola 0093,0055
Multitech 0180, 0217
NAD 0156, 0178, 0166
NEC 0030, 0019, 0056, 0497
NTC 0092
Nikko 0030, 0178, 0092
Noshi 0018
Onwa 0180
Optimus 0154, 0250, 0166
Optonica 0093, 0165
Orion 0236, 0463, 0179
Panasonic 0250, 0051, 0055
Penney 0047, 0156, 0051,0060, 0030, 0178,
0021, 0019, 0018,0056, 0039, 0003,
0027, 0032, 0135,0747, 1347
Philco 0054, 0463, 0030,0145, 0019, 0020,
0096
Philips 0054
Pilot 0030, 0019, 0039
Pioneer 0038, 0166, 0679
Portland 0019, 0039, 0092
Princeton 0717
Prism 0051
Proscan 0047, 0747
Proton 0178, 0003, 0052,0466
Pulsar 0017, 0019
Quasar 0250,0051, 0165, 0055
RCA 0047, 0051, 0093, 0019,0018, 0038,
0090, 0135, 0679,0747, 1047, 1147,
1247, 1347, 1447
RadioShack 0047,0154, 0165, 0180, 0030, 0178,
0019, 0056, 0039,0032, 0747
Realistic 0154,0165,0180, 0030, 0178, 0019,
0056, 0039, 0032
Rhapsody 0185
Runco 0017, 0030, 0497,0603
SSS 0180, 0019
Sampo 0030, 0039,0032, 0052
Samsung 0060,0030, 0178, 0019, 0056,0032
Samsux 0039
Sansei 0451
Sansui 0463
Sanyo 0154, 0146, 0159
Scimitsu 0019
Scotch 0178
Scott 0236, 0180, 0178,0019, 0179
Sears 0047, 0054, 0154, 0156,0178, 0179,
0056, 0146, 0159,0171, 0747
Semivox 0180
Semp 0156
Sharp 0093, 0165, 0039,0157, 0386, 0688
Shogun 0019
Signature 0016
Simpson 0186, 0187
Sony 0000, 0080, 0111
Soundesign 0180, 0178,0179, 0186
Spectricon 0003
Squareview 0171
Starlite 0180
Supre-Macy 0046
Supreme 0000
Sylvania 0054, 0030, 0020,0096, 0381
Symphonic 0180, 0171
TMK 0178, 0056, 0177
TNCi 0017
Tandy 0093
Tatung 0055, 0003
Technics 0250, 0051
Technol Ace 0179
Techwood 0051, 0056, 0003
Teknika 0054, 0180, 0150, 0060, 0019,0179,
0056, 0016, 0039,0092, 0186
Telefunken 0056
Toshiba 0154, 0156,0060, 1256
Tosonic 0185
Totevision 0039
Trical 0157
Universal 0027
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0178, 0019
Viking 0046
Wards 0054, 0165, 0030, 0178, 0021,0019,
0179, 0056, 0016,0020, 0027, 0080,
0096, 0111
Waycon 0156
White Westinghouse 0463, 0623, 0624
Yamaha 0030, 0019
Zenith 0017, 0463, 0016,0092, 0624
Zonda 0003
Setup Codes for TV/VCR Combos:
Broksonic 0002, 0479 (for TV use 0463)
Citizen 0278
Colt 0072
Curtis Mathes 0035 (for TV use 0051)
Daewoo 0278 (for TV use 0624)
Emerson 0002, 0278 (for TV use 0624),
0479 (for TV use 0463)
Funai 0000
GE 0035 (for TV use 0051), 0240,
0048 (for TV use 0093),
0060 (for TV use 0047)
GoldStar 0037 (for TV use 0056)
Harley Davidson 0000
Hitachi 0000
JVC 0067
Lloyd’s 0000
Magnasonic 0278
Magnavox 0000, 0081 (for TV use 0054)
Magnin 0240
Memorex 0037, 0162 (for TV use 0250),
0454, 1037, 1162,1262
MGA 0240
Mitsubishi 0048 (for TV use 0093)
Optimus 0162 (for TV use 0250), 0454,
1162, 1262
Orion 0002, 0479 (for TV use 0463)
Panasonic 0035 (for TV use 0051),
0162 (for TV use 0250),
1162, 1262, 1362
Penney 0035 (for TV use 0051),
0037 (for TV use 0056), 0240
Quasar 0035 (for TV use 0051),
0162 (for TV use 0250)
RadioShack 1037
RCA 0035 (for TV use 0051),
0048 (for TV use 0093),
0060 (for TV use 0047), 0240
Sansui 0000, 0479 (for TV use 0463)
Sanyo 02 40
Sears 0000, 0037 (for TV use 0056)
Sharp 0048 (for TV use 0093)
Sony 0000, 0032 (for TV use 0000)
Sylvania 0081 (for TV use 0054)
Symphonic 0000
Thomas 0000
White Westinghouse 0278 (for TV use 0624)
Zenith 0000, 0479 (for TV use 0463)
Setup Codes For VCRs (and PVRs)
Admiral 0048, 0209
Adventura 0000
Aiko 0278
Aiwa 0037, 0000
Akai 0041
America Action 0278
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell & Howell 0104
Broksonic 0184, 0121, 0209, 0002,0479
CCE 0072, 0278
Calix 0037
Canon 0035
Carver 0081
Cineral 0278
Citizen 0037, 0278
Colt 0072
Craig 0037, 0047, 0240, 0072
Curtis Mathes 0060, 0035,0162, 0041, 0760
Cybernex 0240
Daewoo 0045, 0278
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 0037, 0184, 0000,0121, 0043, 0209,
0002, 0278, 0479
Fisher 0047, 0104
Fuji 0035, 0033
Funai 000 0
GE 0060, 0035, 0048, 0240, 0760
Garrard 0000
Go Video 0432
GoldStar 0037, 0038
Gradiente 0000
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0081, 0038
Harwood 0072
Hitachi 0000, 0042, 0041
Hughes Network Sys. 0042
JVC 0067, 0041
Jensen 0041
KEC 0037, 0278
KLH 0072
Kenwood 0067, 0041, 0038
Kodak 0035, 0037
LXI 0037
Lloyd’s 0000
Logik 0072
MEI 0035
MGA 0240, 0043
MGN Technology 0240
MTC 0240, 0000
Magnasonic 0278
Magnavox 0035, 0039, 0081, 0000,0149, 0563
Magnin 0240
Marantz 0035, 0081
Marta 0037
Matsushita 0035, 0162, 0454
Memorex 0035, 0162, 0037, 0048, 0039,0047,
0240, 0000, 0104,0209, 0454, 0479,
1037, 1162, 1262
Minolta 0 042
Mitsubishi 0048, 0067, 0043
Motorola 0035,0048
Multitech 0000, 0072
NEC 0104, 0067, 0041, 0038
Nikko 0037
Noblex 0240
Olympus 0035
Optimus 1062, 0162, 0037,0048, 0104, 0432,
0454, 1048, 1162,1262
Orion 0184, 0209, 0002,0479
Panasonic 1062,0035, 0162, 0225, 0454, 0616,
1162, 1262, 1362
Penney 0035, 0037, 0240,0042, 0038
Pentax 0042
Philco 0035, 0209, 0479
Philips 0035, 0081, 0618,1081, 1181
Pilot 0037
Pioneer 0067
Polk Audio 008 1
Profitron ic 0240
Proscan 0060, 0760
Protec 0072
Pulsar 0039
Quasar 0035,0162, 0454, 1162
RCA 0060, 0035, 0048, 0240,0042, 0149,
0760
RadioShack 0000,1037
Radix 0037
Randex 0037
Realistic 0035, 0037, 0048, 0047, 0000,0104
ReplayTV 0614, 0616
Runco 0 039
STS 0042
Samsung 0240,0045
Sanky 0048, 0039
Sansui 0000, 0067,0209, 0041, 0479
Sanyo 0047, 0240, 0104
Scott 0184, 0045, 0121,0043
Sears 0035, 0037, 0047, 0000,0042, 0104
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
Singer 0072
Sony 0035, 0032, 0000, 0033,0636, 1032
Sylvania 0035, 0081, 0000,0043
Symphonic 0000
TMK 0240
Tatung 0041
Teac 0000, 0041
Technics 0035, 0162
Teknika 0035, 0037, 0000
Thomas 0000
Tivo 0618, 0636
Toshiba 0045, 0043
Totevision 0037, 0240
Unitech 0240
Vector 0045
Vector Research 0038
Video Concepts 0045
Videomagic 0037
Videosonic 0240
Villain 0000
Wards 0060, 0035, 0048, 0047, 0081,0240,
0000, 0042, 0072,0149, 0760
White Westinghouse 0209, 0072, 0278
XR-1000 0035, 0000, 0072
Yamaha 0038
Zenith 0039, 0000, 0209,0033, 0479
ADDITIONAL INFORMATION
The Motorola DRC450 does not have any
user serviceable parts. Opening the case,
except for the battery cover,may cause
permanent damage to your Motorola
remote control.
No part of this publication may be reproduced, transmitted, transcribed, stored in
any retrieval system, or translated to any
language, in any form or by any means,
electronic, mechanical, magnetic, optical,
manual, or otherwise, without the prior
written permission of Motorola.
MOTOROLA and the stylized M logo
are registered trademarks in the
US Patent and Trademark Office.All
other product or service names are the
property of their respective owners.
Copyright Motorola, Inc.,2002.
M496116-001 8/02
Fold Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Moto DRC450_Mnl 10/2/02 12:04 PM Page 2
Loading...