Mobi Technologies MOBI-WIFI, MOBI-750 User Manual
User Manual
(Mobi
-
WiFi)
2
Product Feature
MOBI-750 is a video recording device helping analyze the causes of accidents by providing video, audio and location
information recorded at the time of vehicle accidents caused by shocks, sudden unintended accelerations, etc.
Continuous Recording Function
It records video images at all time regardless of the occurrence of an accident
Event (Shock) Recording Function
It records video images for a certain period of time before and after a shock on a vehicle is detected.
* Recording time varies depending on the product model.
Function to set linked with Smart Phone
MOBI-750 has a function to play back the images downloaded from the stored video images and to view the images being recorded
on a real time basis in conjunction with the black box in the dedicated application program for the smart phone. The settings of it
also can be done by the smart phone linked with the Black box.
* Some functions may be limited depending on the manufacturer and product model of smart phones.
Emergency Service Function activated at the time of the accident (Applicable to MOBI-750 only)
MOBI-750 has an emergency service function sending a letter message to the linked smart phone by automatically detecting an
accident by the black box in the event that a vehicle is rolled over. This emergency service function is to send information on the
location of the vehicle to the registered telephone number at the time of an accident. (* Not applicable to some models)
High Definition Video Recording a Playback Function
MOBI-750 is recording and playing back video images in HD class and enable to check the video images stored in the memory in
sharper video quality.
Parking Mode Recording Function (Available only when constant power is connected)
This is a mode to record video images for a certain period of time before and after the shock while a vehicle is parked by detecting
even a small shock on the vehicle. In order to use the recording function of this parking mode, the product should be connected to
a constant power source.
Function to check detailed information in a dedicated viewer
The images stored in the memory of the black box can be played back in the dedicated viewer. The detailed information such as the
level of shock, location information through GPS linked map and vehicle driving speed at the time of the accident can be obtained if
the stored images are played back in MOBI-I dedicated viewer for PC
3
Index
Safety Instructions .............................................................................................................................................................................. ..
Precautions in Using the prodcuct .......................................................................................................................................................
Product Configuration ...........................................................................................................................................................................
Product Part Name .............................................................................................................................................................................. 7
Installation .......................................................................................................................................................................................... 9
1. Blackbox installation ............................................................................................................................................................... 9
2. Connection of Video output Cable.......................................................................................................................................... 11
3. Insertion of a micro SD memory card ................................................................................................................................... 11
Product Usage ................................................................................................................................................................................... 12
1. Continuous Recording ............................................................................................................................................................ 12
2. Event Recording ..................................................................................................................................................................... 12
3. Manual Recording .................................................................................................................................................................. 13
4. Parking Mode Recording ....................................................................................................................................................... 13
5. Audio Recording .................................................................................................................................................................... 15
6. Format the micro Sd memory Card ....................................................................................................................................... 15
Voice Guidance description ............................................................................................................................................................... 16
Button Function description ............................................................................................................................................................. 17
Structure of storage folders and file name ...................................................................................................................................... 18
Environment Setting ......................................................................................................................................................................... 20
Use of Dedicated Viewer .................................................................................................................................................................... 27
How to install the dedicated viewer .......................................................................................................................................... 27
Viewer Screen description ......................................................................................................................................................... 28
Playback of video images in a dedicated viewer....................................................................................................................... 30
How to capture images .............................................................................................................................................................. 31
How to capture video images .................................................................................................................................................... 32
Environment setting using dedicated viewer............................................................................................................................ 33
Specification ...................................................................................................................................................................................... 35
4
Safety Instructions
Instructions for user’s safety and prevention of properties damages. Please carefully read these safety
instructions before using the product.
Avoid installing the product in the area preventing from safe driving.
Do not disassemble or repair the product and apply any strong shock on the product.
Do not try to operate the product when driving. If the operation is necessary, stop a vehicle and operate it. We do
not take any legal responsibility for accidents occurred in the operation of the product while driving.
If the product is damaged or broken, it may not operate and record images normally.
The recording quality may be deteriorated depending on the environment in which the images are recorded.
Be careful in handling the product because it is gotten hot along the rise of internal temperature of a vehicle. This
product may experience a malfunction if operated after being parked for a long time in hot or low temperature.
(Operating temperature of the product is ranged between -20˚C ~ +70˚C)
Do not let a liquid like water into the product. It may cause a product failure.
Do not use wet cloth, alcohol, benzene, thinner, etc. for the cleaning purpose
Ensure to connect the product to a stable power source of DC12V or DC24V.
Do not use the cigarette lighter plug provided in the product package if it is not fit to the socket in a vehicle.
Insert the cigarette lighter plug completely into the socket of a vehicle.
Do not use the cigarette lighter plug if it is damaged or broken.
Store the cigarette lighter plug separately removed from a socket if it is not in use for a long time
Do not pull nor disassemble the cigarette lighter plug
Do not breakdown and use the power cable
5
Precautions in using the product
Before starting to use the product, please read this user manual carefully and use the product correctly.
After mounting the product on a vehicle, try to check before use if the product is working properly by carrying out the
test for manual video recording and shock sensing.
Set the date and time in the product before use. They will be automatically set when GPS is connected but you are
asked to check if they are set correctly.
This product is a device to record and save the images in constant mode, event (shock) and parking mode but does not
guarantee the recording of all circumstances of an accident.
Set the shock sensitivity suitable for the environment of a vehicle.
GPS data are not received in the parking mode to save the power.
Be sure to back up all important data and format the micro SD memory card periodically. (Format the SD memory card
after setting the file system of it in FAT32 only)
Remove any obstacle in front of the camera lens of the product or excessive tinting of windshield. This may result in
poor recording quality.
Do not breakdown nor alter the micro SD memory cards.
The micro SD card is a consumable item and is required to be replaced with new one after using a certain period of
time specified by its manufacturer. As the warranty period of the card varies depending on the user's environment.
NEVER remove the micro SD memory card from the slot while power is on or while the Black box is in operation as it
may cause the loss of data and damages to the SD memory card.
6
Product Configuration
Main Body
Power cable
(Cigar Jack)
Micro SD card
Micro SD card
adapter
VIDEO Cable (RCA
type)
Cable Holder
Fixing Tape
Wireless Wifi Receiver
GPS Receiver
(option)
User manual
Product configuration is subject to change without prior notice for function or quality improvement.
Wifi receiver is provided in MOBI-750 only and does not work with MOBI-700
A basic video cable is included in the product as a standard configuration but the cable needed for the
connection with user's navigation device should be purchased separately from the navigation device
manufacturer
7
Product part name
No Name Description
1 Security LED
Displays Security operating condition of the product.
2 Camera
Records front view images of a vehicle.
3 Speaker
Place that voice or event sound is heard
4 Power Connection Terminal
Place to connect power cable.
5 Connection Terminal for GPS Receiver
Place to connect GPS Receiver Cable.
6 VIDEO
(External Video Output)
Place to connect A/V Cable (RCA).
7 Left Button Press : Manual image recording
Press and hold (more than 5 seconds): Voice recording On/Off.
8 Right Button Press: Volume
Adjustment.
Adjustable in 3 levels
Press and Hold (more
than 5 seconds)
Go to Parking Mode manually
9 Operation LED
Displays operating condition of the product.
10 Power LED
Displays power on/off status..
①
② ⑦ ⑨ ⑩ ⑧
③
④
⑤
⑥
Front Back
Upper
8
No Name Description
11 USB Connector
Connects Wifi Receiver.
12 Slot for micro SD memory card
Slot where the micro SD memory card is inserted
13 Power Switch Turns power on/off
Product Status
Operation
Power LED
(Yellow)
Status LED
(Blue)
Security LED
(Blue)
In normal
Operation
Driving Mode ON ON ON
Event Sensing ON Blinking ON
In parking mode
When function is in use ON ON Blinking (Every second)
Event Sensing ON ON Fast Blinking (Every 0.5 second)
⑪
⑫ ⑬
Security
LED
Power LED
Operation LED
Left Side
Right Side
Operation LED
9
Installation
1. Black box installation.
* Select the best spot for mounting of the product linked with a navigation device and a smart phone before
installation by checking if it blocks driver's view and if it prevents the operation and mount it on the selected spot.
1) After selecting the best spot for the mounting of MOBI-750, align the
camera angle of the product to be in line with the ground.
.
2) Fix the clamp of the mounting cradle of MOBI-750, the angle of which has
already aligned, firmly using a coin, etc. to make it not to be moved
.
3) Connect the power cable and GPS cable to its respective port
.
4) After removing dusts and foreign substances completely from the spot
where the product is going to be mounted, attach the product to the
mounting cradle using a double-sided adhesive tape.
.
10
5) Firmly attach the product not to be fallen off by thoroughly pressing the
area of the mounting cradle where the product is attached with the doublesided adhesive tape. Attach GPS receiver as well in the proper position
firmly not to be fallen off.
6) After connecting the power cable to the cigarette lighter socket of a
vehicle, arrange the cables neatly with a cable holder
.
7) The installation is now completed.
Reception of GPS signal may be affected by the heavy tinting of the windshield or coating of the
windshield with metallic components resulting in poor recording quality.
Ensure to remove the protection film from the front of camera lens after the product is successfully
installed.
11
2.
Connection of Video output cable
Connect a video output cable to the body of MOBI-750
Connect a video cable to 'VIDEO' port on the top of the body and RCA cable in
the opposite side (yellow area on the picture) to the A/V INPUT of a navigation
device.
The cable needed for connection of the product with a navigation device is not a
standard accessory. If you need the AV INPUT cable to connect the product with
a navigation device, you should purchase it separately from the navigation
device manufacturer
.
3.
Insertion of a micro SD memory card
Insert a micro SD memory card into the slot in the body of MOBI-750
Push a micro SD memory card into the slot in the side of the product until 'click'
sound is heard.
The memory card comes with a product as one of the standard accessories.
Note
A micro SD memory card is a consumable item. It is required to format regularly and highly recommended
to be replaced with new one after using a certain period of time specified by the manufacturer for stable
image recording.
Be sure to remove the micro SD memory card only while the power is off. Important video data saved in the
SD card should be copied and stored in other storage media for the safety purpose.
Loading...