Mobi Technologies 70280 User Manual

Color-Changing Night Light

Turn it ON

Insert Power Plug (A) of Base (B) into an AC Power Socket (C) making sure the plug is fully

inserted. Once plugged in, the unit is automatically activated and ready, but the light will only turn on when the area is dark enough.

To test it cover the Light Sensor (D) and the unit will light up while the sensor is covered.

DO NOT PLACE THE LIGHT SO THAT IT TOUCHES ANY BEDDING, PILLOWS, PLUSH PRODUCTS OR OTHER OBJECTS THAT COULD INTERFER WITH THE CONNECTION BETWEEN THE POWER PLUG AND THE POWER SOCKET.

Item # 70182

WALLMATE® IS NOT A TOY. AS WITH ALL ELECTRICAL PRODUCTS ITS USE REQUIRES ADULT SUPERVISION.

Switching Sequence

Change Colors

In low light levels the Light Sensor (D) allows the WallMate® to light up when plugged in. It initially comes on in GREEN and will stay green until you...

Press the Color Mode Button (E) which will change it to... Blue

Press the Color Mode Button again and it will change to... RED

Press the Color Mode Button again and the illumination will change to rainbow cycling ... MULTI-COLOR

Press once more and it turns... OFF.

Continuing to press and release the Color Mode Button will sequence through the color modes and to O again in the order described above.

rvsd 12/12

Resetting

Unplugging the WallMate® turns it OFF and also RESETS it to come back on in the initial green mode. No matter where it is in the sequence, if unplugged (or power is interrupted), the unit resets back to the same order when plugged in the next time, and will automatically come on when the area light dims.

If you do not want it to automatically turn on after plugging in, you must cover the Light Sensor (D) so it lights up and then sequense the Color Mode Button (E) to O and leave it that way. Then you can either press the Color Mode Button again later to turn it On or simply unplug it and plug it again to reset.

Note: Unstable power input can cause the internal lighting sequence controller to lock up. If that happens just unplug the unit and plug it in again. This will reset the sequence controller.

Care

To clean the outer surfaces simply wipe with a lightly damp cloth WHILE UNPLUGGED. Do not spray or pour dripping liquids onto any part of the light or get it wet in any way other than damp cloth cleaning as described.

Safety

Keep your WallMate® Color-Changing Night Light away from open ames or extreme heat. As described earlier, do not use the light in any area where it can touch materials that might get caught between the power plug and the power socket. Use only in areas that are dry and clean. Never plug any electrical product into circuits that would exceed the maximum electrical load for its use.

Specification

Product Name: TykeLight® WallMate® Model numbers: 70182 Dimensions : 4 x 5.5 x 3 inches Weight: 3.6 oz Power Requirement: 110-120 volts

Parts Included

WallMate® Color-Changing Night Light –– 1 pc Instructions –– 1 pc

Limited Warranty

Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty service, please return the product to Mobi along with a dated sales receipt from the place of purchase. Purchaser is responsible for shipping the product to Mobi Technologies, Inc. at the address indicated below and for all associated freight and insurance costs. This warranty does not cover damage caused by accident, misuse, abuse, improper maintenance, unauthorized modication, or connection to an improper power supply. A charge will be made for repair of such damage. This warranty excludes all incidental or consequential damages and any liability other than what is stated above.

Mobi Technologies, Inc. 5913 Blackwelder Street Culver City, CA 90232

www.getmobi.com

rvsd 12/12