PRODUCT INFORMATION
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
12669.11 1996-10-02
Baseband Video
780nm
0.5
14
Ø1.5
Ø4.7
3.7
5.4
2.5
0.4
CASE
ANODE
CATHODE
BOTTOM VIEW
The diode chip is isolated from the case.
TO-46 Package With Lens
All dimensions in mm
The low thermal droop of this device
allows baseband video transmission
with minimum distortion. The double-lens optical system provides for
optimum coupling of power into the
fiber. It matches with the 1A354 PIN
Photodiode.
1A359
High-Performance LED
Thermal Characteristics
Fiber:
62.5/125mm
Graded
Index
NA=0.275
Optical and Electrical Characteristics
(25°C Case Temperature)
Absolute Maximum Ratings
Note 1: Measured at the exit of 100 meters of fiber.
Note 2: Transientdecline in optical power due to self-heating.
PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
Fiber-Coupled Power P
fiber
80 120 mW IF=80 mA
(Fig.1,2,&3) (Table1) (Note 1)
Rise and Fall Time tr,t
f
68nsI
F
=80 mA
(10-90%) (no bias)
Bandwidth f
c
55 MHz IF=80 mA
(3dBel)
Thermal Droop
(nonlinearity)
(Note 2)
lDPl 2%I
F
=80 mA
Peak Wavelength l
p
760 780 800 nm IF=80 mA
Spectral Width(FWHM) Dl 50 nm IF=80 mA
Forward Voltage (Fig.5) V
F
2.2 2.4 V IF=80 mA
Reverse Current I
R
20 mA VR=1V
Capacitance C 250 pF VR=0V, f=1MHz
PARAMETER SYMBOL MIN. TYP. MAX. UNIT
Thermal Resistance- Infinite Heat Sink R
thjc
100 8C/W
Thermal Resistance- No Heat Sink R
thja
400 8C/W
Temperature Coefficient- Optical Power dP/dT
j
-0.5 %/8C
Temperature Coefficient-Wavelength dl/dT
j
0.3 nm/8C
PARAMETER SYMBOL LIMIT
Storage Temperature T
stg
-55 to +1258C
Operating Temperature (derating: Fig.4) T
op
-55 to +1258C
Electrical Power Dissipation(derating: Fig.4) P
tot
300 mW
Continuous Forward Current (f<10 kHz) I
F
110 mA
Peak Forward Current (duty cycle<50%, f>1 MHz) I
FRM
180 mA
Reverse Voltage V
R
1.5 V
Soldering Temperature (2mm from the case for 10 sec) T
sld
2608C