Milton CAT S85 User Manual

SELF-PROPELLED TELESCOPIC BOOMS

STM-80 & STM-85

Specifications

RANGE OF MOTION STM-80

MODELS STM-80 STM-85

MEASUREMENTS US Metric US Metric

Working height maximum* 86 ft 26.20 m 91 ft 27.70 m Platform height maximum 80 ft 24.40 m 85 ft 25.90 m Horizontal reach maximum 71 ft 6 in 21.80 m 76 ft 6 in 23.30 m Below ground reach 6 ft 1 in 1.85 m 9 ft 6 in 2.89 m

Platform length - 8 ft model 3 ft .91 m 3 ft .91 m Platform length - 6 ft model 2 ft 6 in .76 m 2 ft 6 in .76 m

Platform width - 8 ft model 8 ft 2.44 m 8 ft 2.44 m Platform width - 6 ft model 6 ft 1.83 m 6 ft 1.83 m Height - stowed 9 ft 2 in 2.80 m 9 ft 2 in 2.80 m

Length - stowed 36 ft 6 in 11.10 m 40 ft 12.20 m

Length - transport (jib tucked under) ——— ——— 38 ft 11.60 m Width 8 ft 2 in 2.50 m 8 ft 2 in 2.50 m

E F

Wheelbase 9 ft 4 in 2.80 m 9 ft 4 in 2.80 m Ground clearance - center 13 in .33 m 13 in .33 m

PRODUCTIVITY

Lift capacity - 8 ft platform 500 lbs 227 kg 500 lbs 227 kg Lift capacity - 6 ft platform 500 lbs 227 kg 500 lbs 227 kg Platform rotation 160° 160° Vertical jib rotation —— 135° Turntable rotation 360° continuous 360° continuous Turntable tailswing 4 ft 8 in 1.42 m 4 ft 8 in 1.42 m Drive speed - stowed - 2WD/4WD 3.5 mph 5.6 km/h 3.5 mph 5.6 km/h Drive speed - raised/extended 0.68 mph 1.1 km/h 0.68 mph 1.1 km/h Gradeability - 2WD - stowed** 30% 30% Gradeability - 4WD - stowed** 45% 45% Turning radius - axle extended: inside 12 ft 3.70 m 12 ft 3.70 m

outside 21 ft 6 in 6.60 m 21 ft 6 in 6.60 m Controls 12V DC proportional 12V DC proportional Tires - RT lug Foam filled 18-625, 16 ply Foam filled 18-625, 16 ply

POWER

Power source Deutz TD2011 L04i 4 cylinder turbocharged diesel 74 hp (55 kW) Perkins 804D-33 4 cylinder diesel 63 hp (47 kW) Continental TME27 4 cylinder Gasoline/LPG 74 hp (55 kW) Auxiliary power unit 12V DC 12V DC Hydraulic tank capacity 40 gal 150 L 40 gal 150 L Fuel tank capacity - diesel 35 gal 132 L 35 gal 132 L Fuel tank capacity - gas/LPG 30 gal 113.6 L 30 gal 113.6 L

RANGE OF MOTION STM-85

WEIGHT***

2WD 35,400 lbs 16,057 kg 37,900 lbs 17,191 kg 4WD 35,500 lbs 16,103 kg 38,000 lbs 17,236 kg

STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, CE Compliance

www.genieindustries.com

* The metric equivalent of working height adds 2 m to platform

height. U.S. adds 6 ft to platform height.

** Gradeability applies to driving on slopes. See operator’s manual

for details regarding slope ratings.

*** Weight will vary depending on options and/or country standards.

Features

EASILY CONFIGURED TO MEET

YOUR NEEDS

PLATFORM OPTIONS

• Steel 8 ft (2.44 m)

• Steel 6 ft (1.83 m)

• Steel 6 or 8 ft (1.83 or 2.44 m) tri-entry

• Steel 4 ft (1.22 m)**

• Steel 5 ft (1.52 m)**

JIB OPTIONS

• Non-jib

• 5 ft (1.52 m) jib boom

POWER OPTIONS

• Deutz turbocharged diesel 74 hp (55 kW)

• Perkins diesel 63 hp (47 kW)

• Continental Gas/LPG 74 hp (55 kW)

DRIVE OPTIONS

• 2WD

• 4WD

AXLE

• Fixed width with active oscillation

TIRE OPTIONS

• Rough terrain foam-filled (standard)

• Rough terrain non-marking foam-filled

• High floatation air-filled

(Increases width by 4 in)

* Available on select models

** Not available on CE machines

*** 750 lb capacity option adds 5,100 lbs

(2,313 kg) to weight

SELF-PROPELLED TELESCOPIC BOOMS

STANDARD FEATURES

MEASUREMENTS

S™-80

• 86 ft (26.38 m) working height

• 71 ft 6 in (21.8 m) horizontal reach

• 500 lbs (227 kg) lift capacity

S™-85

• 91 ft (27.90 m) working height

• 76 ft 6 in (23.3 m) horizontal reach

• 500 lb (227 kg) lift capacity

PRODUCTIVITY

• Self-leveling platform

• Hydraulic platform rotation

• Fully proportional Hall effect joystick controls

• Drive enable

• AC power cord to platform

• Horn

• Hour meter

• Tilt alarm

• Descent alarm

• 360° continuous turntable rotation

• Locking low profile turntable covers

• Positive traction drive

• Two speed wheel motors

POWER

• All engines are emissions compliant

• 12V DC auxiliary power

• Anti-restart engine protection

• Auto engine fault shutdown

• Catalytic converter muffler

(Continental engine only)

• Engine block heater (Continental engine only)

STM-80 & STM-85

OPTIONS & ACCESSORIES

PRODUCTIVITY

• 750 lb capacity, S-80 only***

• Platform swing gate

• Half mesh platform inserts with swing gate

• Platform top auxiliary rail

• Arc Pro 275

• Welder Ready package

• Weld leads to platform

• Air line to platform

• Hydraulic oil cooler

• Fire resistant hydraulic oil

• Biodegradable hydraulic oil

• Basic hostile environment kit

• Deluxe hostile environment kit

• Deluxe aircraft protection package (6 ft platform only)

• Tool tray

• Fluorescent tube caddy

• Pipe cradle (pair)

• Alarm package

• Panel cradle package*

• Platform work lights

• Front driving lights

• Lockable platform control box covers

• Second battery

• Tow package

POWER

• Engine gauge package

• AC generator packages (110V/60Hz, 3000W or 220V/50Hz, 2500W)

• Cold Weather Packages

• Arctic Packages

• Diesel scrubber/spark arrestor muffler

• Diesel spark arrestor muffler

• Retained key selector switch

• LPG tank only, steel, 33.5 lb (15.19 kg) capacity

• Additional LPG tank with carrier

™

Heavy-Duty Welder package

Genie United States

18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730

Telephone +1 (425) 881-1800 Toll Free in USA/Canada +1 (800) 536-1800 Fax +1 (425) 883-3475

Effective Date: January, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation, Genie Industries, Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered Trademark of Genie Industries, Inc. in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.

S80 3.5K 0109B. Part No. 127239

Genie Europe

Millennium House Brunel Drive Newark NG24 2DE UK

Telephone +44 (0)1476 584333 Fax +44 (0)1476 584334

Email: infoeurope@genieind.com

Distributed By:

www.genieindustries.com