Milton CAT S65 User Manual

-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft

-3.05m 0 m 3.05 m 6.10 m 9.14 m 12.2 m 15.24 m 18.29 m

70 ft

21.34 m

60 ft

18.29 m

50 ft

15.24 m

40 ft

12.19 m

30 ft

9.14 m

20 ft

6.1 m

10 ft

3.05 m

0 ft

0 m

-10 ft

-3.05 m

SELF-PROPELLED TELESCOPIC BOOMS

STM-60 & STM-65

Specifications

A

E

B

E

A

RANGE OF MOTION STM-60

B

C

G G

F

MODELS STM-60 STM-65

MEASUREMENTS US Metric US Metric

Working height maximum* 66 ft 20.30 m 71 ft 21.80 m
Platform height maximum 60 ft 18.30 m 65 ft 19.80 m
Horizontal reach maximum 50 ft 10 in 15.48 m 56 ft 2 in 17.10 m
Below ground reach 5 ft 7 in 1.70 m 8 ft 11 in 2.72 m

A

Platform length - 8 ft model 3 ft .91 m 3 ft .91 m
Platform length - 6 ft model 2 ft 6 in .76 m 2 ft 6 in .76 m
Platform width - 8 ft model 8 ft 2.44 m 8 ft 2.44 m

B

Platform width - 6 ft model 6 ft 1.83 m 6 ft 1.83 m
Height - stowed 8 ft 11 in 2.72 m 8 ft 11 in 2.72 m

C

Length - stowed 27 ft 11 in 8.51 m 31 ft 2 in 9.50 m

D

Length ­ Width (with standard tires) 8 ft 2 in 2.49 m 8 ft 2 in 2.49 m

E

F

Wheelbase 8 ft 2.5 in 2.50 m 8 ft 2.5 in 2.50 m

G

Ground clearance - center 1 ft 2.5 in .37 m 1 ft 2.5 in .37 m

PRODUCTIVITY

Lift capacity 500 lbs 227 kg 500 lbs 227 kg
Platform rotation 160° 160°
Vertical jib rotation —— 135°
Turntable rotation 360° continuous 360° continuous
Turntable tailswing 4 ft 1.22 m 4 ft 1.22 m
Drive speed - 2WD stowed 4.0 mph 6.4 km/h 4.0 mph 6.4 km/h
Drive speed - 4WD stowed 3.0 mph 4.8 km/h 3.0 mph 4.8 km/h
Drive speed - raised or extended 0.68 mph 1.1 km/h 0.68 mph 1.1 km/h
Gradeability - 2WD - stowed** 30% 30%
Gradeability - 4WD - stowed** 45% 45%
Turning radius - inside 7 ft 9 in 2.36 m 7 ft 9 in 2.36 m
Turning radius - outside 18 ft 2 in 5.54 m 18 ft 9 in 5.72 m
Controls 12 V DC proportional 12 V DC proportional
Tires - RT Lug 355/55D 625 355/55D 625

POWER

Power source Ford DSG-423 4 cylinder gas/LPG 75 hp (56 kW)
Deutz D2011L03i 3 cylinder diesel 46 hp (34.3 kW)
Perkins 404D-22 4 cylinder diesel 51 hp (38 kW)
Auxiliary power unit 12 V DC 12 V DC
Hydraulic tank capacity 45 gal 170 L 45 gal 170 L
Fuel tank capacity 35 gal 132 L 35 gal 132 L

WEIGHT***

2WD 20,520 lbs 9,308 kg 22,100 lbs 10,024 kg
4WD 20,690 lbs 9,385 kg 22,270 lbs 10,102 kg

STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10

www.genieindustries.com

transport (jib tucked under)

——— ——— 25 ft 7.60 m

D

C

D

F

RANGE OF MOTION STM-65

* The metric equivalent of working height adds 2 m to platform

height. U.S. adds 6 ft to platform height.

** Gradeability applies to driving on slopes, see operator’s manual for

details regarding slope ratings.

*** Weight will vary depending on options and/or country standards.

Features

EASILY CONFIGURED TO MEET

YOUR NEEDS

PLATFORM OPTIONS

• Steel 8 ft (2.44 m) (standard)

• Steel 6 ft (1.83 m)

• Steel 6 or 8 ft (1.83 or 2.44 m) tri-entry

• Steel 4 ft (1.22 m)**

• Steel 5 ft (1.52 m)**

JIB OPTIONS

• Non-jib

• 5 ft (1.52 m) jib boom

POWER OPTIONS

• Ford gas/LPG 75 hp (56 kW)

• Deutz diesel 46 hp (34.3 kW)

• Perkins diesel 51 hp (38 kW)

DRIVE OPTIONS

• 2WD

• 4WD

AXLE OPTIONS

• Active oscillation

• Non-oscillating

TIRE OPTIONS

• Rough terrain air-filled (standard)

• Rough terrain foam-filled

• Rough terrain non-marking
(air or foam-filled)

• High flotation air-filled

• Sealant treated air-filled

* Available on select models
** Not available on CE machines

SELF-PROPELLED TELESCOPIC BOOMS

STANDARD FEATURES

MEASUREMENTS

S™-60

• 66 ft (20.30 m) working height

• 50 ft 10 in (15.48 m) horizontal reach

• Up to 500 lb (227 kg) lift capacity

S™-65

• 71 ft (21.80 m) working height

• 56 ft 2 in (17.10 m) horizontal reach

• Up to 500 lb (227 kg) lift capacity

PRODUCTIVITY

• Self-leveling platform

• Hydraulic platform rotation

• Fully proportional Hall effect
joystick controls

• Fuel select switch on platform and
ground control panels
(Gas/LPG models)

• Drive enable

• AC power cord to platform

• Tilt alarm

• Descent alarm

• Hour meter

• Horn

• 360° continuous turntable rotation

• Positive traction drive

• Two speed wheel motors

POWER

• All engines are emissions compliant

• 12 V DC auxiliary power

• Anti-restart engine protection

• Auto engine fault shutdown

• Swing out engine tray

• Deutz intake air heater

STM-60 & STM-65

OPTIONS & ACCESSORIES

PRODUCTIVITY

• 750 lbs. (340 kg) capacity (S™-60 only)

• Platform swing gate

• Half-mesh platform inserts with swing gate

• Platform top auxiliary rail

• Arc Pro 275

• Welder Ready package

• Weld leads to platform

• Air line to platform

• Hydraulic oil cooler

• Fire resistant hydraulic oil

• Biodegradable hydraulic oil

• Basic hostile environment kit

• Deluxe hostile environment kit

• Deluxe aircraft protection package
(6 ft platform)

• Thumb rocker steer

• Tool tray

• Fluorescent tube caddy

• Pipe cradle (pair)

• Alarm package

• Panel cradle package*

• Platform work lights

• Front driving lights

• Lockable platform control box covers

• Second battery

• Tow package

POWER

• Engine gauge package

•

AC generator packages (110V/60Hz,
3000W or 220V/50Hz, 2500W)

• Cold Weather Packages

• Arctic Packages

• Diesel scrubber/spark arrestor muffler

• LPG tank 33.5 lb (15.19 kg) capacity

• Additional LPG tank with carrier

• Air precleaner

• Retained key selector switch

™

Heavy-Duty Welder package

Genie United States

18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730

Telephone [phone]
Toll Free in USA/Canada [phone]
Fax [phone]

Effective Date: January, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s
Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable
to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex
Corporation, Genie Industries, Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered
Trademark of Genie Industries, Inc. in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.

S60 3.5K 0109N. Part No. 109368

Genie Europe

Millennium House
Brunel Drive
Newark NG24 2DE
UK

Telephone [phone]
Fax [phone]

Email: [e-mail]

Distributed By:

www.genieindustries.com