Milton CAT M315D User Manual

Download

Page 1

Engine

Engine Model Cat®C4.4 ACERT™ Net Power 101 kW 135 hp

• Maximum power at 2,000 rpm

Weights

Operating Weight 16 100 kg (35,494 lb)

to 18 300 kg (40,345 lb)

Transmission

Maximum Travel Speed 34 km/h 21 mph

M315D

Wheel Excavator

Page 2

M315D Wheel Excavator

The D Series incorporates innovations for improved performance and versatility.

Increased lifting capacity, improved cycle times and ease of operation lead to increased productivity and lower operating costs.

Serviceability

For increased safety, all daily maintenance points are accessible from ground level. A centralized greasing system allows lubrication of critical points. pg. 12

✔

Versatility

Caterpillar offers a wide variety of factory-installed attachments that enhance performance and job site management. pg. 11

Operator Comfort

The totally redesigned operator station maximizes comfort while increasing safety. The available auto-weight adjusted air-suspension seat with heated and cooled ventilated cushions improves operator comfort. Safety is enhanced by the new color monitor and optional rear-mounted camera. pg. 6

✔

Hydraulics

The state of the art load-sensing hydraulic system combined with a separate dedicated swing pump provides fast cycle times, increased lift capacity and high bucket and stick forces. This combination maximizes your productivity in any job. pg. 5

✔

Engine

Caterpillar’s exclusive ACERT™ Technology surpasses the most stringent emissions requirements in the construction industry. The U.S. EPA Tier 3 compliant C4.4 offers increased performance and reliability while reducing fuel consumption and sound levels. pg. 4

✔

Page 3

✔ New Feature

Complete Customer Support

Your Cat®dealer offers a wide range of services that can be set up under a customer agreement when you purchase your equipment. Your dealer will help you choose a plan that can cover everything from machine and attachment selection to replacement. pg. 15

Environmentally Responsible Design

Helping to protect our environment, the engine has low operator and spectator sound levels, longer filter change intervals and is more fuel-efficient. pg. 14

✔

Work Tools

The combination of Caterpillar machines and work tools provide a total solution for any application. A variety of couplers, buckets, hammers, grapples, shears, multi-processors to name a few are offered to optimize your machine’s versatility. pg. 10

Booms and Sticks

Caterpillar®excavator booms and sticks are built for performance and long service life. The box section design provides the strength needed for even the toughest applications. Multiple boom and stick options allow you to pick the best match for your job. pg. 9

✔

Undercarriage

Various undercarriage configurations are available to provide the best solution for your work environment; these configurations can include a dozer blade and/or outriggers depending on your needs. pg. 8

Page 4

Powerful Performance. The Cat®C4.4 with ACERT™ Technology introduces a series of evolutionary, incremental improvements that provide breakthrough engine performance. The building blocks of ACERT Technology are fuel delivery, air management and electronic control. ACERT Technology optimizes engine performance while meeting U.S. EPA Tier 3 engine emission regulations. The Cat C4.4 engine in the M315D delivers a maximum gross power of 108 kW (145 hp) at a rated speed of 2,000 rpm. This is 13% more horsepower as compared to the 3054E in the M315C.

Low Fuel Consumption. The C4.4 is electronically controlled and uses the new Cat Common Rail Fuel System and fuel pump. This combination provides outstanding fuel consumption during both production and travel. When the system recognizes roading application the engine adjusts to the most efficient system operating point to save fuel without compromising road performance.

Low Noise, Low Vibration. The Cat C4.4 design improves operator comfort by reducing sound and vibration.

Cooling System. An electronically controlled, hydraulic motor drives a variable speed on-demand fan for engine coolant and hydraulic oil. The optimum fan speed is determined based on coolant and hydraulic oil temperature resulting in reduced fuel consumption and lower sound levels. The electronic engine control continuously compensates for the varying fan load, providing consistent net power, regardless of operating conditions.

One-Touch Low Idle Control.

The two-stage, one-touch Automatic Engine Speed Control reduces engine speed if no operation is performed, maximizing fuel efficiency and reducing sound levels.

Waste Handling Package. The Waste Handling Package has been specifically developed for Cat Wheel Excavators working in waste transfer stations or other extremely dusty applications. This option features the following:

• An automatic, hydraulic reversible fan that reverses airflow after a set interval, manually adjustable between 5 and 60 minutes with a switch located inside the cab.

• A special dense wire mesh cooling system hood further reduces radiator clogging.

• Two cyclone filters provide clean filtered air to the engine compartment, air cleaner, aftercooler and air conditioner condenser.

Engine

Built for power, reliability, low maintenance, excellent fuel economy and low emissions.

Page 5

Dedicated Swing Pump. A dedicated variable displacement piston pump and fixed displacement piston motor power the swing mechanism. This closed hydraulic circuit maximizes swing performance without reducing power to the other hydraulic functions, resulting in smoother combined movements.

Heavy Lift Mode. This mode maximizes lifting performance by boosting the lifting capability of the excavator by 7 percent. Heavy loads can be easily moved in the full working range of the machine, maintaining excellent stability.

Adjustable Hydraulic Sensitivity.

This function allows the operator to adjust the aggressiveness of the machine according to the application. For precision work, one of four different levels of aggressiveness can be pre-selected.

Proportional Auxiliary Hydraulics.

Versatility of the hydraulic system can be expanded to utilize a wide variety of hydraulic work tools using multiple valve options.

• The Multi-Combined Valve is the core of the Tool Control System, allowing the operator to select up to ten pre-programmed work tools from the monitor. These preset hydraulic parameters support either one-way or two-way flow. The joystick sliding switches allow modulated control of the work tool.

• A dedicated Hammer circuit is the best option for tools that require one-way flow only, and do not require the flexibility provided by the Multi-Combined Valve.

• The Medium Pressure Function Valve provides proportional flow that is ideal for tilting buckets or rotating tools.

• A new feature for the D-Series Wheel Excavators is the optional second High Pressure valve. In combination with the Multi-Combined Valve, it provides the possibility to operate the machine with work tools or in applications requiring a third auxiliary hydraulic function, such as a tilting/ rotating quick coupler.

Stick Regeneration Circuit. The stick regeneration circuit increases efficiency and helps increase controllability for higher productivity and lower operating costs.

Quick Coupler. The machine can be optionally equipped with a dedicated hydraulic circuit to operate hydraulic quick couplers.

Hydraulic Snubbers. Caterpillar integrates its cylinder snubber technology into all Wheel Excavator boom, stick and bucket cylinders. These snubbers help cushion shocks, reduce sound and increase cylinder life.

Caterpillar XT™-6 ES Hoses. Premium quality rubber, precision 4-ply wire reinforcement and exclusive reusable couplings are all unique features that deliver top performance and long life.

Hydraulics

Fast cycle times, increased lift capacity, and high bucket and stick forces combine to maximize your productivity in any job.

Page 6

The interior layout maximizes operator space, provides exceptional comfort and reduces operator fatigue.

Operator Comfort

Page 7

Interior Operator Station. Improved

visibility and ergonomics are some of the many new features of the D-Series Wheel Excavators. The pressurized operator station provides maximum space and is designed for simplicity and functionality. Frequently used switches are centralized and are situated on the right-hand switch console. The lefthand seat console controls dozer blade and/or outriggers, and is tiltable for easy access to the cab. The fully automatic climate control adjusts temperature and air flow for exceptional operator comfort. Other comfort features include a cigar lighter, ashtray, drink/bottle holder, magazine rack and integrated mobile phone holder.

Cab Construction. The exterior design uses thick steel tubing along the bottom perimeter of the cab, improving the resistance to fatigue and vibration. This design allows the falling object guards to be bolted directly to the cab. The cab shell is attached to the frame with rubber mounts that limit vibration and sound transmitted from the frame, substantially reducing interior noise levels.

Viewing Area. To maximize visibility, all glass is affixed directly to the cab, eliminating the use of window frames. Choice of fixed or easy-to-open split front windshield meets operator preference and application conditions.

• The 50/50 split front windshield allows both upper and lower portions to be stored in an overhead position and features the one-touch action release system.

• The 70/30 split front windshield stores the upper portion above the operator. The lower front windshield features a rounded design to maximize downward visibility and improves wiper coverage. Also features the one-touch action release system.

• The fixed front windshield comes with high impact resistant laminated glass.

• A unique large skylight without cross bar provides superb upward visibility. The retractable sunscreen blocks direct sunlight.

Monitor. The new compact color monitor displays information in local language that is easy to read and understanding. Functions include:

– 5 programmable “Quick Access” buttons for one-touch selection of favorite functions.

– Filter and oil change warnings are displayed when the number of hours reaches the maintenance interval.

– Tool select function allows the operator to select up to 10 pre-defined hydraulic work tools.

– Adjustable braking characteristics enable the operator to select three levels of travel motor retarder aggressiveness when releasing the travel pedal.

– Provides a rear camera view that is activated through the monitor menu. The optional camera is mounted on the counterweight.

New Deluxe Seat. The new optional deluxe seat, equipped with an active seat climate system, improves operator comfort. Cooled air flows through the seat cushions to reduce body perspiration. On cold days, a two-step seat heater keeps the operator warm and comfortable. The fully adjustable seat with adjustable lumbar support automatically adjusts to the driver’s weight providing a more relaxed and comfortable environment.

Heated Mirrors. Another new feature is electrically heated mirrors, increasing safety and visibility in cold conditions.

Wipers. The parallel wiper system maximizes visibility in poor weather conditions. The wiper virtually covers the entire front windshield, cleaning the operator’s immediate line of sight.

Lunch Box. A large, cooled storage compartment is located behind the operator’s seat. The compartment provides sufficient room to store items such as a lunch box. An optional cover secures the contents during machine operation.

Foot Pedals. Two-way pedals for travel and auxiliary circuits provide increased floor space, reducing the need to change positions. The foot pedal for auxiliary high-pressure circuit can be locked in the off position and used as a footrest for greater operator comfort.

Page 8

Heavy-Duty Axles and Stabilizers.

The D-Series Wheel Excavator undercarriage with pin on/bolt on design provides excellent flexibility, rigidity and long life. Effective hydraulic line routing, transmission protection and heavy-duty axles make the undercarriage perfect for wheel excavator applications. The front axle offers wide oscillating and steering angles. The transmission is mounted directly on the rear axle for protection and optimum ground clearance.

Advanced Disc Brake System. The disc brake system acts directly on the hub instead of the drive shaft to avoid planetary gear backlash. This solution eliminates the rocking effect associated with working free on wheels. The axle design lowers maintenance and lifetime costs. Oil change intervals are at 2,000 working hours, further reducing owner and operator costs.

Drive Line Concept. The rear mounted transmission and robust drive line design, delivers excellent ground clearance for all off-road applications.

Fenders. The optional fenders provide excellent coverage of the front and rear tires, protecting the machine from mud and dirt. Water cannot splash up on the wind screen or cooler. The fenders further protect the machine from stones and debris being thrown up by the tires, providing additional safety for the machine, other vehicles and personnel working close to the excavator.

Adjustable Travel Alarm. An adjustable travel alarm is available to warn people when the machine is moving. Three settings can be selected through the monitor.

• Auto mode – alarm will stop sounding immediately when the machine is no longer traveling, or has been sounding for an uninterrupted 10-second interval.

• Standard mode – alarm operates constantly during moving, with only manual cancellation.

• Off mode – Travel Alarm is disabled.

Undercarriage

Undercarriage and axle design provides maximum strength, flexibility and mobility on wheels.

Page 9

Industrial Stick

Sticks. Four different stick lengths are offered to match different application requirements:

• Short stick (2.1 m/6 ft 11 in) for maximum breakout force and lifting capability.

• Medium stick (2.4 m/7 ft 10 in) for greater crowd force and lift capacity.

• Long stick (2.6 m/8 ft 6 in) for greater depth and reach requirements.

• Industrial stick (3.1 m/10 ft 2 in) for use with free-swinging grapples in material handling and industrial applications.

Design. Booms and sticks are welded, box section structures with thick, multi-plate fabrications in high stress areas, for rugged performance and long service life.

Flexibility. The choice of two booms and four sticks provides the right balance of reach and digging forces for all applications.

One-Piece Boom. The one-piece boom fits best for all standard applications such as truck loading and digging. A unique straight section in the curve of the side plate reduces stress flow and helps increase boom life.

Variable Adjustable (VA) Boom.

The VA boom offers improved right side visibility and machine roading balance. When working in tight quarters or lifting heavy loads, the VA boom offers the best flexibility.

Offset Boom. The offset boom adds major advantages as well as a high level of versatility. The large offset dimensions (left 2460 mm (8 ft 1 in) and right 2760 mm (9 ft 1 in)) enable you to dig along walls, over obstacles, grade while driving and dig under laid pipe. This combination coupled with a tiltable ditch cleaning bucket allows you to operate a highly versatile machine.

Booms and Sticks

Designed for maximum flexibility to keep production high on all jobs.

Page 10

Work Tools. Caterpillar work tools are designed to function as an integral part of your excavator and to provide the best possible performance in your particular application. All work tools are performance-matched to Cat machines.

Quick Couplers. Quick Couplers enable the operator to simply release one work tool and connect to another, making your hydraulic excavator highly versatile. Productivity also increases, as a carrier no longer needs to be idle between jobs. Caterpillar offers hydraulic and spindle quick coupler versions.

Buckets. Caterpillar offers a wide range of specialized buckets, each designed and tested to function as an integral part of your excavator. Buckets feature the new Caterpillar K Series™ Ground Engaging Tools.

Hammers. Cat hammer series deliver very high blow rates, increasing the productivity of your tool carriers in demolition and construction applications. Wide oil flow acceptance ranges make the Caterpillar hammers suitable for a wide range of carriers and provide a system solution from one safe source.

Orange Peel Grapples. The Orange Peel Grapple is constructed of high-strength, wear-resistant steel, with a low and compact design that makes it ideal for dump clearance. There are several choices of tine and shell versions.

Multi-Grapples. The Multi-Grapple with unlimited left and right rotation is the ideal tool for stripping, sorting, handling and loading. The powerful closing force of the grab shells combined with fast opening/closing time ensures rapid cycle time which translates to more tons per hour.

Multi-Processors. Thanks to its single basic housing design, the Multi-Processor series of hydraulic demolition equipment makes it possible to use a range of jaw sets that can handle any demolition job. The Multi-Processor is the most versatile demolition tool on the market.

Vibratory Plate Compactors.

Cat compactors are performance-matched to Cat machines, and integrate perfectly with the Cat hammer line – brackets and hydraulic kits are fully interchangeable between hammers and compactors.

Shears. Cat shears provide superior and effective scrap processing, and are highly productive in demolition environments. Shears are compatible with a matching Cat excavator, and bolt-on brackets are available for either stick or boom-mounted options.

Work Tools

A wide variety of Work Tools help optimize machine performance. Purpose designed and built to Caterpillar’s high durability standards.

Page 11

Joystick Steering. The unique joystick steering option enables an operator to reposition the machine while traveling in first gear by the use of the slider switch on the right joystick. This enables the operator to keep both hands on the joysticks while simultaneously moving the implements and traveling. The operator can do more precise work faster with increased safety around the machine.

Tool Control. The integrated Tool Control system allows the operator to select up to 10 pre-set combinations. This eliminates the need to re-set the hydraulic parameters each time a tool is changed. Individual flow and pressure can be programmed easily as well as one-way/two-way hydraulic functions. Each of the ten-programmed tools can even be given a specific name. The unique Cat proportional sliding switches and optional auxiliary pedal provide modulation to the tool to make precision work easy.

Ride Control. New for the D Series, the ride control system improves operator comfort and allows the machine to travel faster over rough terrain with improved ride quality for the operator. The ride control system features accumulators acting as shock absorbers to dampen the front part motion. Ride control can be activated through a button located on the soft switch panel in the cab.

Control Settings. There are 2 selectable control settings and one automatic travel setting. The new automatic travel mode is activated with a button in the right hand console. In this setting, the transmission will automatically shift up or down, depending on the speed conditions. The operator can choose the best power setting for both engine and hydraulic power versus fuel efficiency.

• Economy Mode – used for lifting, pipe setting, grading, slope finishing and precise work while reducing fuel consumption.

• Power Mode – used for normal truck loading and digging applications, trenching or hammer use.

• Travel Mode – automatically set when the travel pedal is actuated. It provides maximum speed and drawbar pull.

Product Link. Product Link can assist with Fleet Management to keep track of hours, location, security and product health. The machine is pre-wired to accept Product Link systems to be installed in the field. Product Link is also available as a factory installed attachment.

Machine Security. An optional Machine Security System is available from the factory. This system controls who can operate the machine when, and utilizes specific keys to prevent unauthorized machine use.

Versatility

A wide variety of optional factory-installed attachments are available to enhance performance and improve job site management.

Page 12

Ground Level Maintenance. Caterpillar designed its D-Series Wheel Excavators with the operator and service technician in mind. Gull-wing doors, with pneumatically-assisted lift cylinders, effortlessly lift up to allow critical maintenance to be performed quickly and efficiently while maintaining operator safety.

Extended Service Intervals.

The D-Series Wheel Excavator service and maintenance intervals have been extended to reduce machine service time, increase machine availability and reduce operating costs. Using S•O•S

Scheduled Oil Sampling analysis, hydraulic oil change intervals can be extended up to 4,000 hours. Engine coolant change intervals are 12,000 hours with Cat Extended Life Coolant.

Self-Monitoring System with AutoDiagnostics. The electronic engine and

machine controllers provide detailed diagnostic capability for the service technicians. The ability to store active and intermittent indicators simplifies problem diagnosis and reduces total repair time, resulting in improved machine availability and lower operating cost.

Engine Inspection. The engine can be accessed from both ground level and the upper structure. The longitudinal layout ensures that all daily inspection items can be accessed from ground level.

Front Compartment. The front compartment hood can be opened vertically, providing outstanding ground level access to the batteries, air-to-air after cooler, air conditioner condenser and the air cleaner filter.

Easy to Clean Coolers. Flat fins on all coolers reduce clogging, making it easier to remove debris. The main cooling fan and air conditioner condenser are both hinged for easier cleaning.

Swing-out Air Conditioner Condenser.

The Air Conditioning condenser swings out horizontally to allow complete cleaning on both sides as well as excellent access to the air-to-air after cooler.

Air Filter. Caterpillar air filters eliminate the use of service tools, reducing maintenance time. The air filter features a double-element construction with wall flow filtration in the main element and built-in mini-cyclone precleaners for superior cleaning efficiency. The air filters are constantly monitored for optimum performance. If airflow becomes restricted, a warning is displayed by the way of the in-cab monitor.

Simplified and easy maintenance save you time and money.

Serviceability

Page 13

Capsule Filter. The hydraulic return

filter, a capsule filter, prevents contaminants from entering the system when the hydraulic oil is changed.

Fuel Filters. Cat high efficiency fuel filters with a Stay-Clean Valve™ features a special media that removes more than 98 percent of particles, increasing fuel injector life. Both the primary and secondary fuel filters are located in the engine compartment and can be easily changed from ground level.

New Auto-Lube System. The new automatic lubrication system provides the optimal amount of grease to all the main lubrication points, including the bucket linkage. The lubrication interval can be adjusted through the monitor, and status messages for the auto-lube system are displayed.

Scheduled Oil Sampling. Caterpillar has specially developed S•O•SSMOil Sampling Analysis to help ensure better performance, longer life and increased customer satisfaction. This thorough and reliable early warning system detects traces of metals, dirt and other contaminants in your engine, axle and hydraulic oil. It can predict potential trouble avoiding costly failures. Your Caterpillar dealer can give you results and specific recommendations shortly after receiving your sample.

Engine Oil. Caterpillar engine oil is formulated to optimize engine life and performance. The specially formulated oil is more cost effective and increases engine oil change interval to 500 hours, providing industry leading performance and savings.

Water Separator. The D Series is equipped with a primary fuel filter with water separator located in the engine compartment. For ease of service, the water separator can be easily accessed from ground level.

Fuel Tank Drain. The durable, corrosion-free tank has a remote drain located at the bottom of the upper frame to remove water and sediment. The tank drain with hose connection allows simple, spill-free fluid draining.

Remote Greasing Blocks. For those hard to reach locations, greasing blocks have been provided to reduce maintenance time. One block is located in the engine compartment with two grease points for the swing bearing and front-end attachment. For the undercarriage, two remote blocks provide easy access for greasing the oscillating axle and, as an option, the dozer blade.

New LED Rear Lights. Optional Light Emitting Diode (LED) Rear Lights replace the standard lights, for increased visibility on the job site, higher durability and longer life.

Handrails and Steps. Large handrails and steps assist the operator in climbing on and off the machine.

Storage Box. There are two toolboxes integrated in the steps of the undercarriage. Additionally, there is a waterproof storage box integrated into the upper structure steps.

Anti-Skid Plate. They cover the top of the steps and upper structure to help prevent slipping during maintenance. The Anti-Skid plate reduces the accumulation of mud on the upper structure, improving the cleanliness and safety.

Page 14

Fuel Efficiency. The D-Series Wheel Excavators are designed for outstanding performance with high fuel efficiency. This means more work done in a day, less fuel consumed and minimal impact on our environment.

Low Exhaust Emissions. The U.S. EPA Tier 3 compliant Cat C4.4 offers increased performance and reliability while reducing fuel consumption and sound levels.

Quiet Operation. Operator and spectator noise levels are extremely low as a result of the new variable speed fan and remote cooling system.

Biodegradable Hydraulic Oil.

The optional biodegradable hydraulic oil (HEES™) is formulated to provide excellent high-pressure and hightemperature characteristics, and is fully compatible with all hydraulic components. HEES is fully decomposed by soil or water microorganisms, providing a more environmentallysound alternative to mineral-based oils.

Fewer Leaks and Spills. Lubricant fillers and drains are designed to minimize spills. Cat O-Ring Face Seals, Cat XT™ Hose and hydraulic cylinders are all designed to help prevent fluid leaks that can reduce the machine performance and cause harm to the environment.

Longer Service Intervals. Working closely with your Caterpillar Dealer can help extend service intervals for engine oil, hydraulic oil, axle oil and coolant. Meaning fewer required fluids and fewer disposals, all adding up to lower operating costs.

Environmentally Responsible Design

The M315D helps build a better world and preserve the fragile environment.

Page 15

Product Support. You will find nearly all parts requirements at your local Caterpillar dealer parts counter. Cat dealers utilize a world-wide network to find in-stock parts to minimize your downtime. To save money use genuine Cat Reman parts. You will receive the same warranty and reliability as new products at a substantial cost savings.

Selection. Make detailed comparisons of the machines you are considering before you buy. How long do components last? What is the cost of preventive maintenance? Your Cat dealer can give you precise answers to these questions to make sure you operate your machines at the lowest cost.

Purchase. Consider the financing options available as well as day-to-day operating costs. This is also the time to look at dealer services that can be included in the cost of the machine to yield lower equipment and owning and operating costs over the long run.

Operation. Improving operating techniques can boost your profits. Your Cat dealer has videotapes, literature and other ideas to help you increase productivity, and Caterpillar offers certified operator training classes to help maximize the return on your machine investment.

Maintenance. More and more equipment buyers are planning for effective maintenance before buying equipment. Choose from your dealer’s wide range of maintenance services at the time you purchase your machine. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as S•O•SSMFluid Analysis and Technical Analysis help you avoid unscheduled repairs.

Replacement. Repair, rebuild or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice.

Services. Customer Service is critical today in every business. That’s why so many people buy Cat equipment. They know they are getting quality, reliability and performance backed-up with the best Customer Service. Your Caterpillar dealer offers a wide range of services that can be set up under a Customer Support Agreement. The dealer will help you choose a plan that can cover the whole machine including work tools, to help you getting the best out of your investment.

Complete Customer Support

Cat dealer services help you operate longer with lower costs.

Page 16

M315D Wheel Excavator specifications

Hydraulic System

Maximum Pressure

Implement circuit

normal 35 000 kPa 5,076 psi

heavy lift 37 500 kPa 5,439 psi Travel circuit 35 000 kPa 5,076 psi Auxiliary circuit

high pressure 35 000 kPa 5,076 psi

medium pressure 18 500 kPa 2,683 psi Swing mechanism 37 000 kPa 5,366 psi

Maximum flow

Implement/travel circuit 220 L/min 58 gal/min Auxiliary circuit

high pressure 220 L/min 58 gal/min

medium pressure 50 L/min 13 gal/min Swing mechanism 80 L/min 21 gal/min

Transmission

Maximum Travel Speed 34 km/h 21 mph 1st Gear, Forward/Reverse 8 km/h 5 mph 2nd Gear, Forward/Reverse 34 km/h 21 mph Creeper Speed (1st Gear) 3 km/h 2 mph Creeper Speed (2nd Gear) 13 km/h 8 mph Drawbar Pull 97 kN 21,806 lb Maximum Gradeability 69%

Service Refill Capacities

Fuel Tank Capacity 235 L 62 gal Cooling 30 L 7.9 gal Engine Crankcase 8 L 2.1 gal Rear Axle Housing (Differential) 14 L 3.7 gal Front Steering Axle (Differential) 10.5 L 2.8 gal Final Drive Final Drive 2.5 L 0.7 gal Powershift Transmission 2.5 L 0.7 gal Hydraulic Tank 135 L 36 gal Hydraulic System (including tank) 220 L 58 gal

Tires

Optional See Optional Equipment Standard 10.00-20 dual pneumatic

Engine

Engine Model Cat®C4.4 ACERT™ Net Power 101 kW 135 hp Gross Power 108 kW 145 hp ISO 9249 101 kW 135 hp EEC 80/1269 101 kW 135 hp Bore 105 mm 4.13 in Stroke 127 mm 5 in Displacement 4.4 L 269 in

Cylinders 4 Maximum Torque at 1,400 rpm 550 N·m 406 lb ft

• Maximum power at 2,000 rpm

Weights

Operating Weight 15 700 kg (34,615 lb)

to 17 900 kg (39,465 lb)

VA Boom

Rear dozer only 15 300 kg 33,731 lb Rear dozer, front outriggers 16 250 kg 35,825 lb Front and rear outriggers 16 550 kg 36,486 lb

One-Piece Boom

Rear dozer only 14 850 kg 32,739 lb Rear dozer, front outriggers 15 800 kg 34,833 lb Front and rear outriggers 16 100 kg 35,494 lb

Offset Boom

Rear dozer only 15 800 kg 34,833 lb Rear dozer, front outriggers 16 750 kg 36,927 lb

Front and rear outriggers 17 050 kg 37,589 lb Dozer Blade 750 kg 1,653 lb Outriggers 960 kg 2,116 lb Counterweight 3500 kg 7,716 lb

2.1 m (6'11") stick 470 kg 1,036 lb

2.4 m (7'10") stick 514 kg 1,133 lb

2.6 m (8'6") stick 530 kg 1,168 lb

3.1 m (10'2") Industrial stick 450 kg 992 lb

• Above weights are calculated with standard counterweight.

Heavy counterweight option adds 400 kg (882 lb).

Swing Mechanism

Swing Speed 10.5 rpm Swing Torque 40 kN·m 29,502 lb ft

Page 17

M315D Wheel Excavator specifications

Sound Performance

Performance Exterior sound power level

according to 2000/14/EC is 103 db(A)

Interior sound pressure level LpA is 72 db(A)

• When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT 98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture.

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment.

Standards

Brakes SAE J1026 APR 90 Cab/FOGS ISO 10262

Undercarriage

Ground Clearance 370 mm 15 in Maximum Steering Angle ± 35º Oscillating Axle Angle ± 9º

Standard Axle

Minimum Turning Radius 6.3 m 21 ft (Outside of tire)

Minimum Turning Radius 6.9 m 23 ft (End of VA boom)

Minimum Turning Radius 8.3 m 27 ft (End of One-piece boom)

Wide Axle

Minimum Turning Radius 6.5 m 21 ft (Outside of tire)

Minimum Turning Radius 7.1 m 23 ft (End of VA boom)

Minimum Turning Radius 8.4 m 28 ft (End of One-piece boom)

Page 18

M315D Wheel Excavator specifications

Dimensions

All dimensions are approximate.

➤

2540 mm

➤

8'4"

** Maximum tire clearance with outrigger fully down.

4'9"

➤

2550 mm

8'4"

5015 mm

16'5"

➤

1100 mm

370 mm

**120 mm

2550 mm

➤

8'4"

➤

4.7"

1'3"

3665 mm

12'0"

Roading position with 2.4 m/7'10" stick

3100 mm

➤

3980 mm

13'1"

➤

480 mm

➤

1'6"

➤

1315 mm

3'7"

➤

4'4"

➤

12'2"

➤

Undercarriage with dozer only

2550 mm

➤

8'4"

4405 mm

14'5"

➤

1315 mm

➤

4'4"

➤

Undercarriage with 2 sets of outriggers

➤

480 mm

335 mm

1'6"

1'1"

➤

875 mm

➤

➤➤

2'10"

➤

2550 mm

4775 mm

15'8"

➤

Undercarriage with 1 set of outriggers and dozer

796 mm

➤

8'4"

2'7"

➤

875 mm

➤

1450 mm

➤

2'10"

➤

Industrial Stick

Stick Options 2.1 m (6'11") 2.4 m (7'10") 2.6 m (8'6") 3.1 m (10'2")

mm ft/in mm ft/in mm ft/in mm ft/in

1 Shipping Height

VA Boom 3150 10'4" 3150 10'4" 3150 10'4" 3150 10'4" One-piece Boom 3150 10'4" 3150 10'4" 3150 10'4" 3150 10'4" Offset Boom 3150 10'4" 3150 10'4"

2 Shipping Length

VA Boom 8480 27'10" 8480 27'10" 8470 27'9" 8450 27'9" One-piece Boom 8320 27'4" 8330 27'4" 8330 27'4" 8350 27'5" Offset Boom 8480 27'10" 8470 27'9"

3 Support Point

VA Boom 3910 12'10" 3660 12'0" 3560 11'8" 3640 11'11" One-piece Boom 3560 11'8" 3280 10'9" 3160 10'4" 3240 10'8" Offset Boom 4030 13'3" 3780 12'5"

4 Tail Swing Radius

VA Boom 2215 7'3" 2215 7'3" 2215 7'3" 2215 7'3" One-piece Boom 2215 7'3" 2215 7'3" 2215 7'3" 2215 7'3" Offset Boom 2215 7'3" 2215 7'3"

5 Counterweight Clearance

VA Boom 1262 4'2" 1262 4'2" 1262 4'2" 1262 4'2" One-piece Boom 1262 4'2" 1262 4'2" 1262 4'2" 1262 4'2" Offset Boom 1262 4'2" 1262 4'2"

6 Cab Height

VA Boom 3150 10'4" 3150 10'4" 3150 10'4" 3150 10'4" One-piece Boom 3150 10'4" 3150 10'4" 3150 10'4" 3150 10'4" Offset Boom 3150 10'4" 3150 10'4"

Note: All dimensions are approximate and cab height is without Falling Object Guards.

Page 19

M315D Wheel Excavator specifications

VA Boom, One-piece and Offset Boom Working Ranges

2.1 m (6'11"), 2.4 m (7'10"), 2.6 m (8'6"),

3.1 m (10'2") Sticks

VA Boom One-piece Boom Offset Boom

Stick Length 2.1 m (6'11") 2.4 m (7'10") 2.6 m (8'6") 3.1 m (10'2") 2.1 m (6'11") 2.4 m (7'10") 2.6 m (8'6") 3.1 m (10'2") 2.1 m (6'11") 2.4 m (7'10") 1 Digging Height 10 040 mm 10 230 mm 10 380 mm 8950 mm 8980 mm 9070 mm 9190 mm 7700 mm 10 040 mm 10 230 mm

(33'0") (33'7") (34'1") (29'5") (29'6") (29'9") (30'2") (25'3") (33'0") (33'7")

2 Dump Height 6950 mm 7140 mm 7300 mm 3960 mm 6000 mm 6110 mm 6230 mm 3200 mm 6950 mm 7140 mm

(22'10") (23'5") (24'0") (12'0") (19'8") (20'1") (20'5") (10'6") (22'10") (23'5")

3 Digging Depth 5590 mm 5890 mm 6090 mm 5040 mm 5390 mm 5690 mm 5890 mm 4840 mm 5590 mm 5890 mm

(18'4") (19'4") (20'0") (16'7") (17'8") (18'8") (19'4") (15'11") (18'4") (19'4")

4 Vertical Wall 3720 mm 3920 mm 4090 mm

Digging Depth (12'3") (12'10") (13'5") (11'6") (12'0") (12'7") (12'3") (12'10")

5 Depth 2.5 m (8'2") 5370 mm 5690 mm 5900 mm

Straight Clean-up (17'8") (18'8") (19'4") (17'0") (18'0") (18'9") (17'8") (18'8")

6 Reach 9100 mm 9360 mm 9560 mm 8370 mm 8900 mm 9160 mm 9350 mm 8130 mm 9100 mm 9360 mm

(29'11") (30'9") (31'5") (27'6") (29'3") (30'1") (30'8") (26'8") (29'11") (30'9")

7 Reach at 8910 mm 9190 mm 9380 mm 8170 mm 8710 mm 8970 mm 9170 mm 7920 mm 8910 mm 9190 mm

Ground Level (29'3") (30'2") (30'10") (26'10") (28'7") (29'5") (30'1") (25'0") (29'3") (30'2")

Bucket Forces 101 kN 101 kN 101 kN (ISO 6015) (22 705 lbf) (22 705 lbf) (22 705 lbf) (22 705 lbf) (22 705 lbf) (22 705 lbf) (22 705 lbf) (22 705 lbf)

Stick Forces 81 kN 74 kN 71 kN (ISO 6015) (18 209 lbf) (16 635 lbf) (15 961 lbf) (18 209 lbf) (16 635 lbf) (15 961 lbf) (18 209 lbf) (16 635 lbf)

* Industrial Stick has no bucket linkage. All dimensions refer to stick-nose.

Values 1-7 are calculated with bucket and quick coupler with a tip radius of 1552 mm (5'1").

Breakout force values are calculated with heavy lift on (no quick coupler) and a tip radius of 1405 mm (4'7").

2.1 m (6'11"), 2.4 m (7'10"), 2.6 m (8'6"),

3.1 m (10'2") Sticks 2.1 m (6'11"), 2.4 m (7'10") Sticks

Industrial Industrial

Stick* Stick*

N/A

3510 mm 3650 mm 3820 mm

5170 mm 5490 mm 5700 mm

101 kN 101 kN 101 kN

81 kN 74 kN 71 kN

N/A

3720 mm 3920 mm

5370 mm 5690 mm

101 kN 101 kN

81 kN 74 kN

Page 20

M315D Wheel Excavator specifications

ork Tools Matching Guide

When choosing between various work tool models that can be installed onto the same machine configuration, consider work tool application, productivity requirements, and durability. Refer to work tool specifications for application recommendations and productivity information.

Variable adjustable boom One-piece boom

5200 mm (17'1") 5050 mm (16'7")

2 sets Dozer 2 sets Dozer

of stabilizer and stabilizer

lowered lowered

Dozer

lowered

Maximum Material density 1200 kg/m

Not Compatible

of stabilizer and stabilizer

lowered lowered

Without quick coupler

Hammers

Multiprocessors MP15

360° rotatable Shears (boom mounted)

Sorting & Demo Grapple

Compactors CVP75

Orange Peel Grapples (4 tines)

• Not all work tools are available in all areas.

H100, H115 s H120C s ЧЧЧЧЧЧ

S320 S325

G315B D, R ××× ×××

GSH15

Stick length (ft/in) 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6"

Dozer

lowered

(mm) 2100 2400 2600 2100 2400 2600 2100 2400 2600 2100 2400 2600 2100 2400 2600 2100 2400 2600

CC,CR,PS,S PP ××× × ×××× × ×

××× ×××

D R

400 L (0.5 yd 500 L (0.67 yd 600 L (0.75 yd3) ××× ××× 800 L (1.00 yd3) ××× ×××

) ××× ××

) ××× ×××

360° Working Range Maximum Material density 1800 kg/m3(3,000 lb/yd3)

(2,000 lb/yd3)Over the front only

Page 21

M315D Wheel Excavator specifications

Bucket Specifications

Contact your Caterpillar dealer for special bucket requirements.

Pin-on Buckets

Width

Bucket Type mm in kg lb m

610 24 384 847 0.34 0.45 3 762 30 436 963 0.47 0.62 4 914 36 489 1080 0.61 0.8 5

General Purpose

General Purpose Wide Tip

Heavy Duty Rock

Ditch Cleaning 1676 66 606 1338 1.06 1.38 0

Ditch Cleaning Tilt 1803 71 362 800 0.48 0.63 0

• All bucket recommendations are subject to material density.

• All data is subject to change without notice.

• Contact your Caterpillar dealer for bucket availability and specifications.

991 39 569 1257 0.74 0.97 4 1067 42 534 1179 0.78 1.02 5 1219 48 586 1294 0.88 1.15 6 1295 51 672 1484 1.03 1.35 5 1397 55 704 1554 1.12 1.47 5

610 24 445 983 0.44 0.58 3

762 30 506 1116 0.58 0.76 4

914 36 577 1274 0.76 0.99 5 1067 42 581 1282 0.92 1.2 6 1219 48 704 1554 1.07 1.4 7

610 24 464 1025 0.34 0.45 3

762 30 539 1190 0.47 0.62 4

914 36 614 1355 0.61 0.8 5 1067 42 668 1474 0.78 1.02 5 1219 48 743 1640 0.88 1.15 6 1295 51 708 1563 1.03 1.35 5 1524 60 572 1263 0.96 1.25 0

2007 79 424 935 0.54 0.7 0 1524 60 634 1400 0.67 0.87 0

2007 79 392 866 0.54 0.7 0

Weight

Capacity

(SAE)

No. of

Teeth

Page 22

M315D Wheel Excavator specifications

VA Boom – 2.1 m (6'11") stick

Stick

2.1 m (6'11")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg 6700 4200 4100 2500

(Load over front) lb 14,770 9,260 9,040 5,510

Rear dozer down kg *6700 4800 *4800 2900

(Load over rear) lb *14,770 10,580 *10,580 6,390

6.0 m Rear stab down kg *6700 *5300 *4800 3500

(20.0 ft) (Load over rear) lb *14,770 *11,690 *10,580 7,720

2 sets stab down kg *6700 *5300 *4800 *4800

(Load over front) lb *14,770 *11,690 *10,580 *10,580

Dozer and stab down kg *6700 *5300 *4800 4300

(Load over front) lb *14,770 *11,690 *10,580 9,480

Rear dozer up kg *6700 *6700 7200 4100 4100 2600 *2600 1600

(Load over front) lb *14,770 *14,770 15,870 9,040 9,040 5,730 5,730 3,530

Rear dozer down kg *6700 *6700 *7800 4700 *4900 3000 *2600 1900

(Load over rear) lb *14,770 *14,770 *17,800 10,360 *10,800 6,610 5,730 4,190

4.5 m Rear stab down kg *6700 *6700 *7800 5600 *4900 3600 *2600 2300 7.67 m

(15.0 ft) (Load over rear) lb *14,770 *14,770 *17,800 12,350 *10,800 7,940 5,730 5,070 (25'2")

2 sets stab down kg *6700 *6700 *7800 *6000 *4900 *4900 *2600 *2600

(Load over front) lb *14,770 *14,770 *17,800 *13,230 *10,800 *10,800 5,730 5,730

Dozer and stab down kg *6700 *6700 *7800 *6000 *4900 4300 *2600 *2600

(Load over front) lb *14,770 *14,770 *17,800 *13,230 *10,800 9,480 5,730 5,730

Rear dozer up kg *7800 7200 7000 4000 4100 2600 2700 1600 2400 1400

(Load over front) lb *17,800 15,870 15,430 8,820 9,040 5,730 5,950 3,530 5,290 3,090

Rear dozer down kg *7800 *7800 8200 4600 *5300 3000 4200 1900 *2600 1700

(Load over rear) lb *17,800 *17,800 18,080 10,140 *11,690 6,610 9,260 4,190 *5,730 3,750

3.0 m Rear stab down kg *7800 *7800 *10 000 5500 *5300 3600 3700 2300 *2600 2100 8.11 m

(10.0 ft) (Load over rear) lb *17,800 *17,800 *22,050 12,130 *11,690 7,940 8,160 5,070 *5,730 4,630 (26'7")

2 sets stab down kg *7800 *7800 *10 000 *7100 *5300 *5000 *4400 3400 *2600 *2600

(Load over front) lb *17,800 *17,800 *22,050 *15,650 *11,690 *11,020 *9,700 7,500 *5,730 *5,730

Dozer and stab down kg *7800 *7800 *10 000 6500 *5300 *4200 *4400 2800 *2600 2500

(Load over front) lb *17,800 *17,800 *22,050 14,330 *11,690 *9,260 *9,700 6,170 *5,730 5,510

Rear dozer up kg 10 000 7000 6600 3900 4100 2500 2700 1600 2300 1400

(Load over front) lb 22,050 15,403 14,550 8,600 9,040 5,510 5,950 3,530 5,070 3,090

Rear dozer down kg *10 000 8200 7900 4500 *5600 2900 4100 1800 *2700 1600

(Load over rear) lb *22,050 18,080 17,420 9,920 *12,350 6,390 9,040 3,970 *5,950 3,530

1.5 m Rear stab down kg *10 000 *10 000 10 200 5400 5300 3500 3700 2300 *2700 2000 8.21 m

(5.0 ft) (Load over rear) lb *22,050 *22,050 22,490 11,910 11,690 7,720 8,160 5,070 *5,950 4,410 (26'11")

2 sets stab down kg *10 000 *10 000 *11 800 7500 *5600 *4900 *4400 3400 *2700 *2700

(Load over front) lb *22,050 *22,050 *26,010 16,540 *12,350 *10,800 *9,700 7,500 *5,950 *5,950

Dozer and stab down kg *10 000 *10 000 *11 800 6400 *5600 4200 *4400 2800 *2700 2500

(Load over front) lb *22,050 *22,050 *26,010 14,110 *12,350 9,260 *9,700 6,170 *5,950 5,510

Rear dozer up kg *11 800 6600 6600 3800 3900 2400 2600 1500 2400 1400

(Load over front) lb *26,010 14,550 14,550 8,380 8,600 5,290 5,730 3,310 5,290 3,090

Rear dozer down kg *11 800 7900 7800 4400 *5700 2700 *4000 1800 *2900 1700

(Load over rear) lb *26,010 17,420 17,800 9,700 *12,570 5,950 *8,820 3,970 *6,390 3,750

Rear stab down kg *11 800 10 200 10 100 5400 5400 3400 3600 2200 *2900 2100 7.99 m

(Load over rear) lb *26,010 22,490 22,270 11,910 11,910 7,500 7,940 4,850 *6,390 4,630 (26'3")

Ground

2 sets stab down kg *11 800 *11 800 *12 800 7600 *5700 4900 *4000 3300 *2900 *2900

(Load over front) lb *26,010 *26,010 *28,220 16,760 *12,570 10,800 *8,820 7,280 *6,390 *6,390

Dozer and stab down kg *11 800 *11 800 *12 600 6400 *5700 4100 *4000 2800 *2900 2500

(Load over front) lb *26,010 *26,010 *27,780 14,110 *12,570 9,040 *8,820 6,170 *6,390 5,510

Rear dozer up kg 12 400 6600 6700 3600 3800 2200 2700 1600

(Load over front) lb 27,340 14,550 14,770 7,940 8,380 4,850 5,950 3,530

Rear dozer down kg *12 800 7800 7900 4200 *5700 2600 *3200 1800

(Load over rear) lb *28,220 17,800 17,420 9,260 *12,570 5,730 *7,060 3,970

-1.5 m Rear stab down kg *12 800 10 100 10 200 5200 5200 3200 *3200 2300 7.43 m

(-5.0 ft) (Load over rear) lb *28,220 22,270 22,490 11,460 11,460 7,060 *7,060 5,070 (24'5")

2 sets stab down kg *12 800 *12 800 *13 100 *7800 *5700 4800 *3200 *3200

(Load over front) lb *28,220 *28,220 *28,880 *17,800 *12,570 10,580 *7,060 *7,060

Dozer and stab down kg *12 800 *12 600 *13 000 6400 *5700 3900 *3200 2800

(Load over front) lb *28,220 *27,780 *28,660 14,110 *12,570 8,600 *7,060 6,170

Rear dozer up kg 12 500 6700 3400

(Load over front) lb 27,560 14,770 7,500

Rear dozer down kg *13 100 7900 4000

(Load over rear) lb *28,880 17,420 8,820

-3.0 m Rear stab down kg *13 100 10 200 5000

(-10.0 ft) (Load over rear) lb *28,880 22,490 11,020

2 sets stab down kg *13 100 *13 100 *7400

(Load over front) lb *28,880 *28,880 *16,310

Dozer and stab down kg *13 100 13 000 6200

(Load over front) lb *28,880 28,660 13,670

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 23

M315D Wheel Excavator specifications

VA Boom – 2.4 m (7'10") stick

Stick

2.4 m (7'10")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg *4800 4200 4200 2600

(Load over front) lb *10,580 9,260 9,260 5,730

Rear dozer down kg *4800 *4800 *4600 3000

(Load over rear) lb *10,580 *10,580 *10,140 6,610

6.0 m Rear stab down kg *4800 *4800 *4600 3600

(20.0 ft) (Load over rear) lb *10,580 *10,580 *10,140 7,940

2 sets stab down kg *4800 *4800 *4600 *4600

(Load over front) lb *10,580 *10,580 *10,140 *10,140

Dozer and stab down kg *4800 *4800 *4600 4300

(Load over front) lb *10,580 *10,580 *10,140 9,480

Rear dozer up kg *5000 *5000 *5500 4100 4100 2700 2800 1600 *2300 1500

(Load over front) lb *11,020 *11,020 *12,130 9,040 9,040 5,950 6,170 3,530 *5,070 3,310

Rear dozer down kg *5000 *5000 *5500 4700 *4800 3000 *2900 1900 *2300 1800

(Load over rear) lb *11,020 *11,020 *12,130 10,360 *10,580 6,610 *6,390 4,190 *5,070 3,970

4.5 m Rear stab down kg *5000 *5000 *5500 *5500 *4800 3600 *2900 2400 *2300 2200 7.96 m

(15.0 ft) (Load over rear) lb *11,020 *11,020 *12,130 *12,130 *10,580 7,940 *6,390 5,290 *5,070 4,850 (26'1")

2 sets stab down kg *5000 *5000 *5500 *5500 *4800 *4800 *2900 *2900 *2300 *2300

(Load over front) lb *11,020 *11,020 *12,130 *12,130 *10,580 *10,580 *6,390 *6,390 *5,070 *5,070

Dozer and stab down kg *5000 *5000 *5500 *5500 *4800 4300 *2900 *2900 *2300 *2300

(Load over front) lb *11,020 *11,020 *12,130 *12,130 *10,580 9,480 *6,390 *6,390 *5,070 *5,070

Rear dozer up kg *8400 7300 6200 4000 4100 2600 2800 1600 *2300 1400

(Load over front) lb *18,520 16,090 13,670 8,820 9,040 5,730 6,170 3,530 *5,070 3,090

Rear dozer down kg *8400 *8400 *6800 4600 *5200 3000 4200 1900 *2300 1600

(Load over rear) lb *18,520 *18,520 *14,990 10,140 11,460 6,610 9,260 4,190 *5,070 3,530

3.0 m Rear stab down kg *8400 *8400 *6800 5500 *5200 3600 3700 2400 *2300 2000 8.38 m

(10.0 ft) (Load over rear) lb *18,520 *18,520 *14,990 12,130 11,460 7,940 8,160 5,290 *5,070 4,410 (27'6")

2 sets stab down kg *8400 *8400 *6800 *6800 *5200 5000 *4300 3500 *2300 *2300

(Load over front) lb *18,520 *18,520 *14,990 *14,990 11,460 11,020 *9,480 7,720 *5,070 *5,070

Dozer and stab down kg *8400 *8400 *6800 *6400 *5200 *4200 *4300 2900 *2300 *2300

(Load over front) lb *18,520 *18,520 *14,990 *14,110 11,460 *9,260 *9,480 6,390 *5,070 *5,070

Rear dozer up kg *9700 7100 6200 3900 4100 2600 2700 1600 2200 1300

(Load over front) lb *21,390 15,650 13,670 8,600 9,040 5,730 5,950 3,530 4,850 2,870

Rear dozer down kg *9700 8100 *7700 4500 *5500 2900 4200 1900 *2400 1500

(Load over rear) lb *21,390 17,860 *16,980 9,920 *12,130 6,390 9,260 4,190 *5,290 3,310

1.5 m Rear stab down kg *9700 *9700 *7700 5400 5300 3600 3700 2300 *2400 1900 8.48 m

(5.0 ft) (Load over rear) lb *21,390 *21,390 *16,980 11,910 11,690 7,940 8,160 5,070 *5,290 4,190 (27'10")

2 sets stab down kg *9700 *9700 *7700 *7500 *5500 *4900 *4400 3400 *2400 *2400

(Load over front) lb *21,390 *21,390 *16,980 *16,540 *12,130 *10,800 *9,700 7,500 *5,290 *5,290

Dozer and stab down kg *9700 *9700 *7700 6400 *5500 4200 *4400 2800 *2400 2300

(Load over front) lb *21,390 *21,390 *16,980 14,110 *12,130 9,260 *9,700 6,170 *5,290 5,070

Rear dozer up kg *11 600 6900 6200 3800 4000 2400 2600 1500 2300 1300

(Load over front) lb *25,570 15,210 13,670 8,380 8,820 5,290 5,730 3,310 5,070 2,870

Rear dozer down kg *11 600 8100 *7800 4400 *5600 2800 4100 1800 *2500 1500

(Load over rear) lb *25,570 17,860 *17,800 9,700 *12,350 6,170 9,040 3,970 *5,510 3,310

Rear stab down kg *11 600 10 100 *7800 5400 5300 3400 3600 2300 *2500 1900 8.27 m

(Load over rear) lb *25,570 22,270 *17,800 11,910 11,690 7,500 7,940 5,070 *5,510 4,190 (27'2")

Ground

2 sets stab down kg *11 600 *11 600 *7800 *7500 *5600 5000 *4300 3300 *2500 *2500

(Load over front) lb *25,570 *25,570 *17,800 *16,540 *12,350 11,020 *9,480 7,280 *5,510 *5,510

Dozer and stab down kg *11 600 *11 600 *7800 *6400 *5600 4100 *4300 2800 *2500 2400

(Load over front) lb *25,570 *25,570 *17,800 *14,110 *12,350 9,040 *9,480 6,170 *5,510 5,290

Rear dozer up kg 12 300 6600 6100 3600 3800 2300 2500 1500

(Load over front) lb 27,120 14,550 13,450 7,940 8,380 5,070 5,510 3,310

Rear dozer down kg *12 700 7800 *7900 4200 *5800 2600 *2900 1700

(Load over rear) lb *28,000 17,800 *17,420 9,260 *12,790 5,730 *6,390 3,750

-1.5 m Rear stab down kg *12 700 10 100 *7900 5200 5300 3200 *2900 2100 7.73 m

(-5.0 ft) (Load over rear) lb *28,000 22,270 *17,420 11,460 11,690 7,060 *6,390 4,630 (25'4")

2 sets stab down kg *12 700 *12 700 *7900 7700 *5800 4800 *2900 *2900

(Load over front) lb *28,000 *28,000 *17,420 16,980 *12,790 10,580 *6,390 *6,390

Dozer and stab down kg *12 700 12 500 *7900 6400 *5800 4000 *2900 2600

(Load over front) lb *28,000 27,560 *17,420 14,110 *12,790 8,820 *6,390 5,730

Rear dozer up kg 12 400 6600 6000 3500 3700 2200

(Load over front) lb 27,340 14,550 13,230 7,720 8,160 4,850

Rear dozer down kg *13 100 7800 *7900 4000 *4100 2500

(Load over rear) lb *28,880 17,800 *17,420 8,820 *9,040 5,510

-3.0 m Rear stab down kg *13 100 10 100 *7900 5000 *4100 3100

(-10.0 ft) (Load over rear) lb *28,880 22,270 *17,420 11,020 *9,040 6,830

2 sets stab down kg *13 100 *13 100 *7900 7700 *4100 *4100

(Load over front) lb *28,880 *28,880 *17,420 16,980 *9,040 *9,040

Dozer and stab down kg *13 100 12 900 *7900 6200 *4100 3800

(Load over front) lb *28,880 28,440 *17,420 13,670 *9,040 8,380

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 24

M315D Wheel Excavator specifications

VA Boom – 2.6 m (8'6") stick

Stick

2.6 m (8'6")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg *4300 4200 4200 2600

(Load over front) lb *9,480 9,260 9,260 5,730

Rear dozer down kg *4300 *4300 *4400 3000

(Load over rear) lb *9,480 *9,480 *9,700 6,610

6.0 m Rear stab down kg *4300 *4300 *4400 *3600

(20.0 ft) (Load over rear) lb *9,480 *9,480 *9,700 *7,940

2 sets stab down kg *4300 *4300 *4400 *4400

(Load over front) lb *9,480 *9,480 *9,700 *9,700

Dozer and stab down kg *4300 *4300 *4400 *4300

(Load over front) lb *9,480 *9,480 *9,700 *9,480

Rear dozer up kg *5000 4100 4100 2700 2800 1700 *2100 1500

(Load over front) lb *11,020 9,040 9,040 5,950 6,170 3,750 *4,630 3,310

Rear dozer down kg *5000 4700 *4700 3000 *3500 1900 *2100 1700

(Load over rear) lb *11,020 10,360 *10,360 6,610 *7,720 4,190 *4,630 3,750

4.5 m Rear stab down kg *5000 *5000 *4700 3600 *3500 2400 *2100 *2100 8.17 m

(15.0 ft) (Load over rear) lb *11,020 *11,020 *10,360 7,940 *7,720 5,290 *4,630 *4,630 (26'10")

2 sets stab down kg *5000 *5000 *4700 *4700 *3500 3500 *2100 *2100

(Load over front) lb *11,020 *11,020 *10,360 *10,360 *7,720 7,720 *4,630 *4,630

Dozer and stab down kg *5000 *5000 *4700 4300 *3500 2900 *2100 *2100

(Load over front) lb *11,020 *11,020 *10,360 9,480 *7,720 6,390 *4,630 *4,630

Rear dozer up kg *8400 7300 6300 4000 4100 2600 2800 1700 *2100 1300

(Load over front) lb *18,520 16,090 13,890 8,820 9,040 5,730 6,170 3,750 *4,630 2,870

Rear dozer down kg *8400 *8400 *6700 4600 *5100 3000 *4200 1900 *2100 1500

(Load over rear) lb *18,520 *18,520 *14,770 10,140 *11,240 6,610 *9,260 4,190 *4,630 3,310

3.0 m Rear stab down kg *8400 *8400 *6700 5500 *5100 3600 3800 2400 *2100 1900 8.57 m

(10.0 ft) (Load over rear) lb *18,520 *18,520 *14,770 12,130 *11,240 7,940 8,380 5,290 *4,630 4,190 (28'1")

2 sets stab down kg *8400 *8400 *6700 *6700 *5100 5000 *4200 3500 *2100 *2100

(Load over front) lb *18,520 *18,520 *14,770 *14,770 *11,240 11,020 *9,260 7,720 *4,630 *4,630

Dozer and stab down kg *8400 *8400 *6700 6500 *5100 *4200 *4200 2900 *2100 *2100

(Load over front) lb *18,520 *18,520 *14,770 14,330 *11,240 *9,260 *9,260 6,390 *4,630 *4,630

Rear dozer up kg *9900 7100 6200 3900 4100 2600 2700 1600 2100 1200

(Load over front) lb *21,830 15,650 13,670 8,600 9,040 5,730 5,950 3,530 4,630 2,650

Rear dozer down kg *9900 8100 *7600 4500 *5500 3000 4200 1900 *2200 1500

(Load over rear) lb *21,830 17,860 *16,760 9,920 *12,130 6,610 9,260 4,190 *4,850 3,310

1.5 m Rear stab down kg *9900 *9900 *7600 5400 5300 3600 3700 2300 *2200 1800 8.67 m

(5.0 ft) (Load over rear) lb *21,830 *21,830 *16,760 11,910 11,680 7,940 8,160 5,070 *4,850 3,970 (28'5")

2 sets stab down kg *9900 *9900 *7600 *7500 *5500 *4900 *4300 3400 *2200 *2200

(Load over front) lb *21,830 *21,830 *16,760 *16,540 *12,130 *10,800 *9,480 7,500 *4,850 *4,850

Dozer and stab down kg *9900 *9900 *7600 6400 *5500 4200 *4300 2900 *2200 *2200

(Load over front) lb *21,830 *21,830 *16,760 14,110 *12,130 9,260 *9,480 6,390 *4,850 *4,850

Rear dozer up kg *11 200 6900 6200 3800 4000 2500 2700 1600 2200 1300

(Load over front) lb *24,690 15,210 13,670 8,380 8,820 5,510 5,950 3,530 4,850 2,870

Rear dozer down kg *11 200 8200 *7800 4400 *5600 2800 4100 1800 *2300 1500

(Load over rear) lb *24,690 18,080 *17,800 9,700 *12,350 6,170 9,040 3,970 *5,070 3,310

Rear stab down kg *11 200 10 100 *7800 5400 5300 3500 3700 2300 *2300 1900 8.47 m

(Load over rear) lb *24,690 22,270 *17,800 11,910 11,690 7,720 8,160 5,070 *5,070 4,190 (27'9")

Ground

2 sets stab down kg *11 200 *11 200 *7800 *7500 *5600 5000 *4300 3400 *2300 *2300

(Load over front) lb *24,690 *24,690 *17,800 *16,540 *12,350 11,020 *9,480 7,500 *5,070 *5,070

Dozer and stab down kg *11 200 *11 200 *7800 *6400 *5600 4200 *4300 2800 *2300 2300

(Load over front) lb *24,690 *24,690 *17,800 *14,110 *12,350 9,260 *9,480 6,170 *5,070 5,070

Rear dozer up kg 12 200 6600 6200 3600 3800 2300 2600 1500 2400 1400

(Load over front) lb 26,900 14,550 13,670 7,940 8,380 5,070 5,730 3,310 5,290 3,090

Rear dozer down kg *12 700 7900 *7900 4200 *5700 2600 *3400 1800 *2600 1600

(Load over rear) lb *28,000 17,420 *17,420 9,260 *12,570 5,730 *7,500 3,970 *5,730 3,530

-1.5 m Rear stab down kg *12 700 10 200 *7900 5200 5300 3300 *3400 2200 *2600 2100 7.94 m

(-5.0 ft) (Load over rear) lb *28,000 22,490 *17,420 11,460 11,690 7,280 *7,500 4,850 *5,730 4,630 (26'1")

2 sets stab down kg *12 700 *12 700 *7900 *7600 *5700 4800 *3400 3300 *2600 *2600

(Load over front) lb *28,000 *28,000 *17,420 *16,760 *12,570 10,580 *7,500 7,280 *5,730 *5,730

Dozer and stab down kg *12 700 12 500 *7900 6400 *5700 4000 *3400 2700 *2600 2500

(Load over front) lb *28,000 27,560 *17,420 14,110 *12,570 8,820 *7,500 5,950 *5,730 5,510

Rear dozer up kg 12 400 6600 6000 3500 3700 2200

(Load over front) lb 27,340 14,550 13,230 7,720 8,160 4,850

Rear dozer down kg *13 100 7800 *8000 4100 *4700 2500

(Load over rear) lb *28,880 17,800 *17,640 9,040 *10,360 5,510

-3.0 m Rear stab down kg *13 100 10 100 *8000 5100 *4700 3200

(-10.0 ft) (Load over rear) lb *28,880 22,270 *17,640 11,240 *10,360 7,060

2 sets stab down kg *13 100 *13 100 *8000 7700 *4700 4700

(Load over front) lb *28,880 *28,880 *17,640 16,980 *10,360 10,360

Dozer and stab down kg *13 100 12 800 *8000 6200 *4700 3900

(Load over front) lb *28,880 28,220 *17,640 13,670 *10,360 8,600

Rear dozer up kg 9200 6500

(Load over front) lb 20,280 14,330

Rear dozer down kg *9200 7700

(Load over rear) lb *20,280 16,980

-4.5 m Rear stab down kg *9200 *9200

(-15.0 ft) (Load over rear) lb *20,280 *20,280

2 sets stab down kg *9200 *9200

(Load over front) lb *20,280 *20,280

Dozer and stab down kg *9200 *9200

(Load over front) lb *20,280 *20,280

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 25

M315D Wheel Excavator specifications

One-piece Boom – 2.1 m (6'11") stick

Stick

2.1 m (6'11")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg 4100 2500

(Load over front) lb 9,040 5,510

Rear dozer down kg *4400 2900

(Load over rear) lb *9,700 6,390

6.0 m Rear stab down kg *4400 3500

(20.0 ft) (Load over rear) lb *9,700 7,720

2 sets stab down kg *4400 *4400

(Load over front) lb *9,700 *9,700

Dozer and stab down kg *4400 4200

(Load over front) lb *9,700 9,260

Rear dozer up kg *5700 4000 4000 2500 *2600 1800

(Load over front) lb *12,570 8,820 8,820 5,510 *5,730 3,970

Rear dozer down kg *5700 4600 *4800 2900 *2600 2000

(Load over rear) lb *12,570 10,140 *10,580 6,390 *5,730 4,410

4.5 m Rear stab down kg *5700 5600 *4800 3500 *2600 2500 7.46 m

(15.0 ft) (Load over rear) lb *12,570 12,350 *10,580 7,720 *5,730 5,510 (24'6")

2 sets stab down kg *5700 *5700 *4800 *4800 *2600 *2600

(Load over front) lb *12,570 *12,570 *10,580 *10,580 *5,730 *5,730

Dozer and stab down kg *5700 *5700 *4800 4200 *2600 *2600

(Load over front) lb *12,570 *12,570 *10,580 9,260 *5,730 *5,730

Rear dozer up kg 6100 3700 3900 2400 *2600 1600

(Load over front) lb 13,450 8,160 8,600 5,290 *5,730 3,530

Rear dozer down kg *6900 4300 *5300 2800 *2600 1800

(Load over rear) lb *15,210 9,480 *11,690 6,170 *5,730 3,970

3.0 m Rear stab down kg *6900 5200 *5300 3400 *2600 2200 7.9 m

(10.0 ft) (Load over rear) lb *15,210 11,460 *11,690 7,500 *5,730 4,850 (25'11")

2 sets stab down kg *6900 *6900 *5300 4900 *2600 *2600

(Load over front) lb *15,210 *15,210 *11,690 10,800 *5,730 *5,730

Dozer and stab down kg *6900 6400 *5300 4100 *2600 *2600

(Load over front) lb *15,210 14,110 *11,690 9,040 *5,730 *5,730

Rear dozer up kg 5800 3400 3800 2300 2700 1600 2500 1500

(Load over front) lb 12,790 7,500 8,380 5,070 5,950 3,530 5,510 3,310

Rear dozer down kg *7800 4000 *5700 2600 *3900 1900 *2700 1700

(Load over rear) lb *17,800 8,820 *12,570 5,730 *8,600 4,190 *5,950 3,750

1.5 m Rear stab down kg *7800 4900 5200 3200 3700 2300 *2700 2100 8.01 m

(5.0 ft) (Load over rear) lb *17,800 10,800 11,460 7,060 8,160 5,070 *5,950 4,630 (26'3")

2 sets stab down kg *7800 7500 *5700 4800 *3900 3400 *2700 *2700

(Load over front) lb *17,800 16,540 *12,570 10,580 *8,600 7,500 *5,950 *5,950

Dozer and stab down kg *7800 6100 *5700 3900 *3900 2800 *2700 2600

(Load over front) lb *17,800 13,450 *12,570 8,600 *8,600 6,170 *5,950 5,730

Rear dozer up kg 5700 3300 3700 2200 2500 1500

(Load over front) lb 12,570 7,280 8,160 4,850 5,510 3,310

Rear dozer down kg *7900 3800 *5700 2500 *2900 1800

(Load over rear) lb *17,420 8,380 *12,570 5,510 *6,390 3,970

Rear stab down kg *7900 4800 5100 3100 *2900 2200 7.79 m

(Load over rear) lb *17,420 10,580 11,240 6,830 *6,390 4,850 (25'7")

Ground

2 sets stab down kg *7900 7300 *5700 4700 *2900 *2900

(Load over front) lb *17,420 16,090 *12,570 10,360 *6,390 *6,390

Dozer and stab down kg *7900 5900 *5700 3800 *2900 2700

(Load over front) lb *17,420 13,010 *12,570 8,380 *6,390 5,950

Rear dozer up kg *7900 6000 5600 3200 3700 2200 2800 1700

(Load over front) lb *17,420 13,230 12,350 7,060 8,160 4,850 6,170 3,750

Rear dozer down kg *7900 7100 *7300 3800 *5200 2500 *3400 2000

(Load over rear) lb *17,420 15,650 *16,090 8,380 *11,460 5,510 *7,500 4,410

-1.5 m Rear stab down kg *7900 *7900 *7300 4700 5100 3100 *3400 2400 7.21 m

(-5.0 ft) (Load over rear) lb *17,420 *17,420 *16,090 10,360 11,240 6,830 *7,500 5,290 (23'8")

2 sets stab down kg *7900 *7900 *7300 7300 *5200 4600 *3400 *3400

(Load over front) lb *17,420 *17,420 *16,090 16,090 *11,460 10,140 *7,500 *7,500

Dozer and stab down kg *7900 *7900 *7300 5900 *5200 3800 *3400 3000

(Load over front) lb *17,420 *17,420 *16,090 13,010 *11,460 8,380 *7,500 6,610

Rear dozer up kg *7500 6100 *5600 3300

(Load over front) lb *16,540 13,450 *12,350 7,280

Rear dozer down kg *7500 7300 *5600 3900

(Load over rear) lb *16,540 16,090 *12,350 8,600

-3.0 m Rear stab down kg *7500 *7500 *5600 4800

(-10.0 ft) (Load over rear) lb *16,540 *16,540 *12,350 10,580

2 sets stab down kg *7500 *7500 *5600 *5600

(Load over front) lb *16,540 *16,540 *12,350 *12,350

Dozer and stab down kg *7500 *7500 *5600 *5600

(Load over front) lb *16,540 *16,540 *12,350 *12,350

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 26

M315D Wheel Excavator specifications

One-piece Boom – 2.4 m (7'10") stick

Stick

2.4 m (7'10")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg 4100 2600

(Load over front) lb 9,040 5,730

Rear dozer down kg *4300 2900

(Load over rear) lb *9,480 6,390

6.0 m Rear stab down kg *4300 3600

(20.0 ft) (Load over rear) lb *9,480 7,940

2 sets stab down kg *4300 *4300

(Load over front) lb *9,480 *9,480

Dozer and stab down kg *4300 4300

(Load over front) lb *9,480 9,480

Rear dozer up kg 4100 2500 *2300 1700

(Load over front) lb 9,040 5,510 *5,070 3,750

Rear dozer down kg *4600 2900 *2300 1900

(Load over rear) lb *10,140 6,390 *5,070 4,190

4.5 m Rear stab down kg *4600 3500 *2300 *2300 7.74 m

(15.0 ft) (Load over rear) lb *10,140 7,720 *5,070 *5,070 ( 25'5")

2 sets stab down kg *4600 *4600 *2300 *2300

(Load over front) lb *10,140 *10,140 *5,070 *5,070

Dozer and stab down kg *4600 4200 *2300 *2300

(Load over front) lb *10,140 9,260 *5,070 *5,070

Rear dozer up kg 6200 3700 3900 2400 2700 1700 *2300 1500

(Load over front) lb 13,670 8,160 8,600 5,290 5,950 3,750 *5,070 3,310

Rear dozer down kg *6600 4300 *5100 2800 *4000 1900 *2300 1700

(Load over rear) lb *14,550 9,480 *11,240 6,170 *8,820 4,190 *5,070 3,750

3.0 m Rear stab down kg *6600 5300 *5100 3400 3700 2400 *2300 2100 8.16 m

(10.0 ft) (Load over rear) lb *14,550 11,690 *11,240 7,500 8,160 5,290 *5,070 4,630 (26'9")

2 sets stab down kg *6600 *6600 *5100 4900 *4000 3400 *2300 *2300

(Load over front) lb *14,550 *14,550 *11,240 10,800 *8,820 7,500 *5,070 *5,070

Dozer and stab down kg *6600 6400 *5100 4100 *4000 2900 *2300 *2300

(Load over front) lb *14,550 14,110 *11,240 9,040 *8,820 6,390 *5,070 *5,070

Rear dozer up kg 5800 3400 3800 2300 2700 1600 2300 1400

(Load over front) lb 12,790 7,500 8,380 5,070 5,950 3,530 5,070 3,090

Rear dozer down kg *7600 4000 *5600 2600 4100 1900 *2400 1600

(Load over rear) lb *16,760 8,820 *12,350 5,730 9,040 4,190 *5,290 3,530

1.5 m Rear stab down kg *7600 5000 5200 3200 3600 2300 *2400 2000 8.27 m

(5.0 ft) (Load over rear) lb *16,760 11,020 11,460 7,060 7,940 5,070 *5,290 4,410 (27'2")

2 sets stab down kg *7600 7500 *5600 4800 *4400 3400 *2400 *2400

(Load over front) lb *16,760 16,540 *12,350 10,580 *9,700 7,500 *5,290 *5,290

Dozer and stab down kg *7600 6100 *5600 3900 *4400 2800 *2400 *2400

(Load over front) lb *16,760 13,450 *12,350 9,600 *9,700 6,170 *5,290 *5,290

Rear dozer up kg *4000 *4000 5600 3200 3700 2200 2600 1600 2400 1400

(Load over front) lb *8,820 *8,820 12,350 7,060 8,160 4,850 5,730 3,530 5,290 3,090

Rear dozer down kg *4000 *4000 *7900 3800 *5700 2500 4000 1800 *2600 1700

(Load over rear) lb *8,820 *8,820 *17,420 8,380 *12,570 5,510 8,820 3,970 *5,730 3,750

Rear stab down kg *4000 *4000 *7900 4800 5100 3100 3600 2300 *2600 2100 8.05 m

(Load over rear) lb *8,820 *8,820 *17,420 10,580 11,240 6,830 7,940 5,070 *5,730 4,630 (26'5")

Ground

2 sets stab down kg *4000 *4000 *7900 7300 *5700 4600 *4200 3300 *2600 *2600

(Load over front) lb *8,820 *8,820 *17,420 16,090 *12,570 10,140 *9,260 7,280 *5,730 *5,730

Dozer and stab down kg *4000 *4000 *7900 5900 *5700 3800 *4200 2800 *2600 2500

(Load over front) lb *8,820 *8,820 *17,420 13,010 *12,570 8,380 *9,260 6,170 *5,730 5,510

Rear dozer up kg *7700 5900 5600 3200 3600 2100 2700 1600

(Load over front) lb *16,980 13,010 12,350 7,060 7,940 4,630 5,950 3,530

Rear dozer down kg *7700 7000 *7400 3700 *5400 2500 *3000 1800

(Load over rear) lb *16,980 15,430 *16,310 8,160 *11,910 5,510 *6,610 3,970

-1.5 m Rear stab down kg *7700 *7700 *7400 4700 5000 3100 *3000 2300 7.5 m

(-5.0 ft) (Load over rear) lb *16,980 *16,980 *16,310 10,360 11,020 6,830 *6,610 5,070 (24'7")

2 sets stab down kg *7700 *7700 *7400 7200 *5400 4600 *3000 *3000

(Load over front) lb *16,980 *16,980 *16,310 15,870 *11,910 10,140 *6,610 *6,610

Dozer and stab down kg *7700 *7700 *7400 5800 *5400 3800 *3000 2800

(Load over front) lb *16,980 *16,980 *16,310 12,790 *11,910 8,380 *6,610 6,170

Rear dozer up kg *8300 6000 5600 3300 3700 2200

(Load over front) lb *18,300 13,230 12,350 7,280 8,160 4,850

Rear dozer down kg *8300 7200 *6000 3800 *4000 2500

(Load over rear) lb *18,300 15,870 *13,230 8,380 *8,820 5,510

-3.0 m Rear stab down kg *8300 *8300 *6000 4800 *4000 3100

(-10.0 ft) (Load over rear) lb *18,300 *18,300 *13,230 10,580 *8,820 6,830

2 sets stab down kg *8300 *8300 *6000 *6000 *4000 *4000

(Load over front) lb *18,300 *18,300 *13,230 *13,230 *8,820 *8,820

Dozer and stab down kg *8300 *8300 *6000 5900 *4000 3800

(Load over front) lb *18,300 *18,300 *13,230 13,010 *8,820 8,380

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 27

M315D Wheel Excavator specifications

One-piece Boom – 2.6 m (8'6") stick

Stick

2.6 m (8'6")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg 4100 2600

(Load over front) lb 9,040 5,730

Rear dozer down kg *4200 3000

(Load over rear) lb *9,260 6,610

6.0 m Rear stab down kg *4200 3600

(20.0 ft) (Load over rear) lb *9,260 7,940

2 sets stab down kg *4200 *4200

(Load over front) lb *9,260 *9,260

Dozer and stab down kg *4200 *4200

(Load over front) lb *9,260 *9,260

Rear dozer up kg 4100 2500 *2500 1700 *2100 1600

(Load over front) lb 9,040 5,510 *5,510 3,750 *4,630 3,530

Rear dozer down kg *4500 2900 *2500 2000 *2100 1800

(Load over rear) lb *9,920 6,390 *5,510 4,410 *4,630 3,970

4.5 m Rear stab down kg *4500 3500 *2500 2400 *2100 *2100 7.94 m

(15.0 ft) (Load over rear) lb *9,920 7,720 *5,510 5,290 *4,630 *4,630 (26'1")

2 sets stab down kg *4500 *4500 *2500 *2500 *2100 *2100

(Load over front) lb *9,920 *9,920 *5,510 *5,510 *4,630 *4,630

Dozer and stab down kg *4500 4200 *2500 *2500 *2100 *2100

(Load over front) lb *9,920 9,260 *5,510 *5,510 *4,630 *4,630

Rear dozer up kg 6200 3800 3900 2400 2700 1700 *2100 1400

(Load over front) lb 13,670 8,380 8,600 5,290 5,950 3,750 *4,630 3,090

Rear dozer down kg *6400 4300 *5000 2800 4200 1900 *2100 1600

(Load over rear) lb *14,110 9,480 *11,020 6,170 9,260 4,190 *4,630 3,530

3.0 m Rear stab down kg *6400 5300 *5000 3400 3700 2400 *2100 2000 8.36 m

(10.0 ft) (Load over rear) lb *14,110 11,690 *11,020 7,500 8,160 5,290 *4,630 4,410 (27'5")

2 sets stab down kg *6400 *6400 *5000 4900 *4200 3400 *2100 *2100

(Load over front) lb *14,110 *14,110 *11,020 10,800 *9,260 7,500 *4,630 *4,630

Dozer and stab down kg *6400 *6400 *5000 4100 *4200 2900 *2100 *2100

(Load over front) lb *14,110 *14,110 *11,020 9,040 *9,260 6,390 *4,630 *4,630

Rear dozer up kg 5900 3500 3800 2300 2700 1600 *2200 1300

(Load over front) lb 13,010 7,720 8,380 5,070 5,950 3,530 *4,850 2,870

Rear dozer down kg *7500 4000 *5500 2600 4100 1900 *2200 1600

(Load over rear) lb *16,540 8,820 *12,130 5,730 9,040 4,190 *4,850 3,530

1.5 m Rear stab down kg *7500 5000 5200 3200 3700 2300 *2200 1900 8.46 m

(5.0 ft) (Load over rear) lb *16,540 11,020 11,460 7,060 8,160 5,070 *4,850 4,190 (27'9")

2 sets stab down kg *7500 *7500 *5500 4800 *4400 3400 *2200 *2200

(Load over front) lb *16,540 *16,540 *12,130 10,580 *9,700 7,500 *4,850 *4,850

Dozer and stab down kg *7500 6100 *5500 4000 *4400 2800 *2200 *2200

(Load over front) lb *16,540 13,450 *12,130 8,820 *9,700 6,170 *4,850 *4,850

Rear dozer up kg *4200 *4200 5700 3300 3700 2200 2600 1600 2300 1400

(Load over front) lb *9,260 *9,260 12,570 7,280 8,160 4,850 5,730 3,530 5,070 3,090

Rear dozer down kg *4200 *4200 *7900 3800 *5700 2500 4000 1800 *2400 1600

(Load over rear) lb *9,260 *9,260 *17,420 8,380 *12,570 5,510 8,820 3,970 *5,290 3,530

Rear stab down kg *4200 *4200 *7900 4800 5100 3100 3600 2300 *2400 2000 8.25 m

(Load over rear) lb *9,260 *9,260 *17,420 10,580 11,240 6,830 7,940 5,070 *5,290 4,410 (27'1")

Ground

2 sets stab down kg *4200 *4200 *7900 7300 *5700 4600 *4400 3300 *2400 *2400

(Load over front) lb *9,260 *9,260 *17,420 16,090 *12,570 10,140 *9,700 7,280 *5,290 *5,290

Dozer and stab down kg *4200 *4200 *7900 5900 *5700 3800 *4400 2800 *2400 *2400

(Load over front) lb *9,260 *9,260 *17,420 13,010 *12,570 8,380 *9,700 6,170 *5,290 *5,290

Rear dozer up kg *7500 5900 5600 3200 3600 2100 2500 1500

(Load over front) lb *16,540 13,010 12,350 7,060 7,940 4,630 5,510 3,310

Rear dozer down kg *7500 7000 *7600 3700 *5500 2500 *2800 1800

(Load over rear) lb *16,540 15,430 *16,760 8,160 *12,130 5,510 *6,170 3,970

-1.5 m Rear stab down kg *7500 *7500 *7600 4700 5000 3100 *2800 2200 7.71 m

(-5.0 ft) (Load over rear) lb *16,540 *16,540 *16,760 10,360 11,020 6,830 *6,170 4,850 (25'4")

2 sets stab down kg *7500 *7500 *7600 7200 *5500 4600 *2800 *2800

(Load over front) lb *16,540 *16,540 *16,760 15,870 *12,130 10,140 *6,170 *6,170

Dozer and stab down kg *7500 *7500 *7600 5800 *5500 3800 *2800 2700

(Load over front) lb *16,540 *16,540 *16,760 12,790 *12,130 8,380 *6,170 5,950

Rear dozer up kg *8800 6000 5600 3200 3700 2200

(Load over front) lb *19,400 13,230 12,350 7,060 8,160 4,850

Rear dozer down kg *8800 7200 *6300 3800 *4300 2500

(Load over rear) lb *19,400 15,870 *13,890 8,380 *9,480 5,510

-3.0 m Rear stab down kg *8800 *8800 *6300 4700 *4300 3100

(-10.0 ft) (Load over rear) lb *19,400 *19,400 *13,890 10,360 *9,480 6,830

2 sets stab down kg *8800 *8800 *6300 *6300 *4300 *4300

(Load over front) lb *19,400 *19,400 *13,890 *13,890 *9,480 *9,480

Dozer and stab down kg *8800 *8800 *6300 5900 *4300 3800

(Load over front) lb *19,400 *19,400 *13,890 13,010 *9,480 8,380

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 28

M315D Wheel Excavator specifications

Offset Boom – 2.1 m (6'11") stick

Stick

2.1 m (6'11")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg *5300 4200 4100 2500

(Load over front) lb *11,690 9,260 9,040 5,510

Rear dozer down kg *5300 4800 *4700 2800

(Load over rear) lb *11,690 10,580 *10,360 6,170

6.0 m Rear stab down kg *5300 *5300 *4700 3500

(20.0 ft) (Load over rear) lb *11,690 *11,690 *10,360 7,720

2 sets stab down kg *5300 *5300 *4700 *4700

(Load over front) lb *11,690 *11,690 *10,360 *10,360

Dozer and stab down kg *5300 *5300 *4700 4200

(Load over front) lb *11,690 *11,690 *10,360 9,260

Rear dozer up kg *6800 6800 *5900 4100 4100 2500 *2300 1500

(Load over front) lb *14,990 14,990 *13,010 9,040 9,040 5,510 *5,070 3,310

Rear dozer down kg *6800 *6800 *5900 4700 *4800 2900 *2300 1800

(Load over rear) lb *14,990 *14,990 *13,010 10,360 *10,580 6,390 *5,070 3,970

4.5 m Rear stab down kg *6800 *6800 *5900 5600 *4800 3600 *2300 2200 7.69 m

(15.0 ft) (Load over rear) lb *14,990 *14,990 *13,010 12,350 *10,580 7,940 *5,070 4,850 (25'3")

2 sets stab down kg *6800 *6800 *5900 *5900 *4800 *4800 *2300 *2300

(Load over front) lb *14,990 *14,990 *13,010 *13,010 *10,580 *10,580 *5,070 *5,070

Dozer and stab down kg *6800 *6800 *5900 *5900 *4800 4200 *2300 *2300

(Load over front) lb *14,990 *14,990 *13,010 *13,010 *10,580 9,260 *5,070 *5,070

Rear dozer up kg *7600 7100 *6100 3900 4000 2500 2600 1500 *2300 1300

(Load over front) lb *16,760 15,650 *13,450 8,600 8,820 5,510 5,730 3,310 *5,070 2,870

Rear dozer down kg *7600 *7600 *6800 4500 *5100 2900 4100 1800 *2300 1600

(Load over rear) lb *16,760 *16,760 *14,990 9,920 *11,240 6,390 9,040 3,970 *5,070 3,530

3.0 m Rear stab down kg *7600 *7600 *6800 5400 *5100 3600 3600 2200 *2300 2000 8.12 m

(10.0 ft) (Load over rear) lb *16,760 *16,760 *14,990 11,910 *11,240 7,940 7,940 4,850 *5,070 4,410 (26'8")

2 sets stab down kg *7600 *7600 *6800 *6800 *5100 4900 *4200 3300 *2300 *2300

(Load over front) lb *16,760 *16,760 *14,990 *14,990 *11,240 10,800 *9,260 7,280 *5,070 *5,070

Dozer and stab down kg *7600 *7600 *6800 6300 *5100 4200 *4200 2700 *2300 *2300

(Load over front) lb *16,760 *16,760 *14,990 13,890 *11,240 9,260 *9,260 5,950 *5,070 *5,070

Rear dozer up kg *9700 6900 6100 3900 4000 2400 2600 1400 2200 1200

(Load over front) lb *21,390 15,210 13,450 8,600 8,820 5,290 5,730 3,090 4,850 2,650

Rear dozer down kg *9700 8100 *7500 4500 *5400 2800 4000 1700 *2300 1500

(Load over rear) lb *21,390 17,860 *16,540 9,920 *11,910 6,170 8,820 3,750 *5,070 3,310

1.5 m Rear stab down kg *9700 *9700 *7500 5300 5200 3500 3600 2200 *2300 1900 8.22 m

(5.0 ft) (Load over rear) lb *21,390 *21,390 *16,540 11,690 11,460 7,720 7,940 4,850 *5,070 4,190 (27'0")

2 sets stab down kg *9700 *9700 *7500 *7300 *5400 *4900 *4200 3300 *2300 *2300

(Load over front) lb *21,390 *21,390 *16,540 *16,090 *11,910 *10,800 *9,260 7,280 *5,070 *5,070

Dozer and stab down kg *9700 *9700 *7500 6300 *5400 4200 *4200 2700 *2300 2300

(Load over front) lb *21,390 *21,390 *16,540 13,890 *11,910 9,260 *9,260 5,950 *5,070 5,070

Rear dozer up kg *11 500 6400 6200 3700 3800 2300 2500 1400 2300 1300

(Load over front) lb *25,353 14,110 13,670 8,160 8,380 5,070 5,510 3,090 5,070 2,870

Rear dozer down kg *11 500 7700 *7600 4300 *5500 2600 *3800 1600 *2500 1500

(Load over rear) lb *25,353 16,980 *16,760 9,480 *12,130 5,730 *8,380 3,530 *5,510 3,310

Rear stab down kg *11 500 10 000 *7600 5300 5300 3300 3500 2100 *2500 1900 8.01 m

(Load over rear) lb *25,353 22,050 *16,760 11,690 11,690 7,280 7,720 4,630 *5,510 4,190 (26'3")

Ground

2 sets stab down kg *11 500 *11 500 *7600 *7400 *5500 4800 *3800 3200 *2500 *2500

(Load over front) lb *25,353 *25,353 *16,760 *16,310 *12,130 10,580 *8,380 7,060 *5,510 *5,510

Dozer and stab down kg *11 500 *11 500 *7600 6300 *5500 4000 *3800 2600 *2500 2400

(Load over front) lb *25,353 *25,353 *16,760 13,890 *12,130 8,820 *8,380 5,730 *5,510 5,290

Rear dozer up kg 12 100 6400 6000 3500 3600 2100 2600 1400

(Load over front) lb 26,680 14,110 13,230 7,720 7,940 4,630 5,730 3,090

Rear dozer down kg *12 400 7600 *7700 4100 *5500 2400 *2800 1700

(Load over rear) lb *27,340 16,760 *16,980 9,040 *12,130 5,290 *6,170 3,750

-1.5 m Rear stab down kg *12 400 9900 *7700 5100 5100 3100 *2800 2200 7.45 m

(-5.0 ft) (Load over rear) lb *27,340 21,830 *16,980 11,240 11,240 6,830 *6,170 4,850 (24'5")

2 sets stab down kg *12 400 *12 400 *7700 7700 *5500 4600 *2800 *2800

(Load over front) lb *27,340 *27,340 *16,980 16,980 *12,130 10,140 *6,170 *6,170

Dozer and stab down kg *12 400 12 300 *7700 6300 *5500 3800 *2800 2700

(Load over front) lb *27,340 27,120 *16,980 13,890 *12,130 8,380 *6,170 5,950

Rear dozer up kg 12 300 6400 5800 3300

(Load over front) lb 27,120 14,110 12,790 7,280

Rear dozer down kg *12 700 7700 *7200 3900

(Load over rear) lb *28,000 16,980 *15,870 8,600

-3.0 m Rear stab down kg *12 700 10 000 *7200 4900

(-10.0 ft) (Load over rear) lb *28,000 22,050 *15,870 10,800

2 sets stab down kg *12 700 *12 700 *7200 *7200

(Load over front) lb *28,000 *28,000 *15,870 *15,870

Dozer and stab down kg *12 700 *12 700 *7200 6000

(Load over front) lb *28,000 *28,000 *15,870 13,230

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 29

M315D Wheel Excavator specifications

Offset Boom – 2.4 m (7'10") stick

Stick

2.4 m (7'10")

Load Point Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg *4800 4200 4100 2500

(Load over front) lb *10,580 9,260 9,040 5,510

Rear dozer down kg *4800 *4800 *4400 2900

(Load over rear) lb *10,580 *10,580 *9,700 6,390

6.0 m Rear stab down kg *4800 *4800 *4400 3600

(20.0 ft) (Load over rear) lb *10,580 *10,580 *9,700 7,940

2 sets stab down kg *4800 *4800 *4400 *4400

(Load over front) lb *10,580 *10,580 *9,700 *9,700

Dozer and stab down kg *4800 *4800 *4400 4300

(Load over front) lb *10,580 *10,580 *9,700 9,480

Rear dozer up kg *5200 *5200 *5600 4100 4100 2600 2700 1500 *2000 1400

(Load over front) lb *11,460 *11,460 *12,350 9,040 9,040 5,730 5,950 3,310 *4,410 3,090

Rear dozer down kg *5200 *5200 *5600 4700 *4600 3000 *2800 1800 *2000 1700

(Load over rear) lb *11,460 *11,460 *12,350 10,360 *10,140 6,610 *6,170 3,970 *4,410 3,750

4.5 m Rear stab down kg *5200 *5200 *5600 *5600 *4600 3600 *2800 2300 *2000 *2000 7.98 m

(15.0 ft) (Load over rear) lb *11,460 *11,460 *12,350 *12,350 *10,140 7,940 *6,170 5,070 *4,410 *4,410 (26'2")

2 sets stab down kg *5200 *5200 *5600 *5600 *4600 *4600 *2800 *2800 *2000 *2000

(Load over front) lb *11,460 *11,460 *12,350 *12,350 *10,140 *10,140 *6,170 *6,170 *4,410 *4,410

Dozer and stab down kg *5200 *5200 *5600 *5600 *4600 4200 *2800 2800 *2000 *2000

(Load over front) lb *11,460 *11,460 *12,350 *12,350 *10,140 9,260 *6,170 6,170 *4,410 *4,410

Rear dozer up kg *7700 7200 6200 3900 4000 2600 2700 1500 *2000 1200

(Load over front) lb *16,980 15,870 13,670 8,600 8,820 5,730 5,950 3,310 *4,410 2,650

Rear dozer down kg *7700 *7700 *6600 4500 *5000 3000 *4100 1800 *2000 1500

(Load over rear) lb *16,980 *16,980 *14,550 9,920 11,020 6,610 *9,040 3,970 *4,410 3,310

3.0 m Rear stab down kg *7700 *7700 *6600 5400 *5000 *3500 3700 2300 *2000 1900 8.4 m

(10.0 ft) (Load over rear) lb *16,980 *16,980 *14,550 11,910 11,020 *7,720 8,160 5,070 *4,410 4,190 (27'7")

2 sets stab down kg *7700 *7700 *6600 *6600 *5000 4900 *4100 3400 *2000 *2000

(Load over front) lb *16,980 *16,980 *14,550 *14,550 11,020 10,800 *9,040 7,500 *4,410 *4,410

Dozer and stab down kg *7700 *7700 *6600 6400 *5000 4200 *4100 2800 *2000 *2000

(Load over front) lb *16,980 *16,980 *14,550 14,110 11,020 9,260 *9,040 6,170 *4,410 *4,410

Rear dozer up kg *9800 7000 6000 3900 4000 2500 2600 1500 *2100 1200

(Load over front) lb *21,610 15,430 13,230 8,600 8,820 5,510 5,730 3,310 *4,630 2,650

Rear dozer down kg *9800 8000 *7400 4400 *5300 2900 4100 1700 *2100 1400

(Load over rear) lb *21,610 17,640 *16,310 9,700 *11,690 6,390 9,040 3,750 *4,630 3,090

1.5 m Rear stab down kg *9800 *9800 *7400 5300 5200 3500 3600 2200 *2100 1800 8.49 m

(5.0 ft) (Load over rear) lb *21,610 *21,610 *16,310 11,690 11,460 7,720 7,940 4,850 *4,630 3,970 (27'10")

2 sets stab down kg *9800 *9800 *7400 *7300 *5300 *4800 *4200 3300 *2100 *2100

(Load over front) lb *21,610 *21,610 *16,310 *16,090 *11,690 *10,580 *9,260 7,280 *4,630 *4,630

Dozer and stab down kg *9800 *9800 *7400 6200 *5300 4200 *4200 2700 *2100 *2100

(Load over front) lb *21,610 *21,610 *16,310 13,670 *11,690 9,260 *9,260 5,950 *4,630 *4,630

Rear dozer up kg *11 200 6700 6100 3700 3900 2300 2500 1400 2200 1200

(Load over front) lb *24,690 14,770 13,450 8,160 8,600 5,070 5,510 3,090 4,850 2,650

Rear dozer down kg *11 200 8000 *7500 4300 *5400 2700 4000 1700 *2200 1400

(Load over rear) lb *24,690 17,640 *16,540 9,480 *11,910 5,950 8,820 3,750 *4,850 3,090

Rear stab down kg *11 200 9900 *7500 5300 5200 3300 3500 2100 *2200 1800 8.29 m

(Load over rear) lb *24,690 21,830 *16,540 11,690 11,460 7,280 7,720 4,630 *4,850 3,970 (27'2")

Ground

2 sets stab down kg *11 200 *11 200 *7500 7300 *5400 4900 *4100 3200 *2200 *2200

(Load over front) lb *24,690 *24,690 *16,540 16,090 *11,910 10,800 *9,040 7,060 *4,850 *4,850

Dozer and stab down kg *11 200 *11 200 *7500 6300 *5400 4100 *4100 2600 *2200 *2200

(Load over front) lb *24,690 *24,690 *16,540 13,890 *11,910 9,040 *9,040 5,730 *4,850 *4,850

Rear dozer up kg 12 000 6400 6000 3500 3700 2100 2400 1300

(Load over front) lb 26,460 14,110 13,230 7,720 8,160 4,630 5290 2,870

Rear dozer down kg *12 300 7600 *7600 4100 *5500 2500 *2500 1600

(Load over rear) lb *27,120 16,760 *16,760 9,040 *12,130 5,510 *5,510 3,530

-1.5 m Rear stab down kg *12 300 9900 *7600 5100 5200 3100 *2500 2000 7.75 m

(-5.0 ft) (Load over rear) lb *27,120 21,830 *16,760 11,240 11,460 6,830 *5,510 4,410 (25'5")

2 sets stab down kg *12 300 *12 300 *7600 *7500 *5500 4700 *2500 *2500

(Load over front) lb *27,120 *27,120 *16,760 *16,540 *12,130 10,360 *5,510 *5,510

Dozer and stab down kg *12 300 12 200 *7600 6300 *5500 3800 *2500 *2500

(Load over front) lb *27,120 26,900 *16,760 13,890 *12,130 8,380 *5,510 *5,510

Rear dozer up kg 12 200 6300 5800 3300 3600 2000

(Load over front) lb 26,900 13,890 12,790 7,280 7,940 4,410

Rear dozer down kg *12 800 7600 *7600 3900 *4000 2400

(Load over rear) lb *28,220 16,760 *16,760 8,600 *8,820 5,290

-3.0 m Rear stab down kg *12 800 9900 *7600 4900 *4000 3000

(-10.0 ft) (Load over rear) lb *28,220 21,830 *16,760 10,800 *8,820 6,610

2 sets stab down kg *12 800 *12 800 *7600 7500 *4000 *4000

(Load over front) lb *28,220 *28,220 *16,760 16,540 *8,820 *8,820

Dozer and stab down kg *12 800 12 700 *7600 6000 *4000 3700

(Load over front) lb *28,220 28,000 *16,760 13,230 *8,820 8,160

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 30

M315D Wheel Excavator specifications

VA Boom Industrial Stick – 3.1 m (10'2") stick

➤

Industrial Stick

3.1 m (10'2")

➤

Load Point

➤

Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg *4600 3100

(Load over front) lb *10,140 6,830

Rear dozer down kg *4600 3400

(Load over rear) lb *10,140 7,500

6.0 m Rear stab down kg *4600 4000

(20.0 ft) (Load over rear) lb *10,140 8,820

2 sets stab down kg *4600 *4600

(Load over front) lb *10,140 *10,140

Dozer and stab down kg *4600 *4600

(Load over front) lb *10,140 *10,140

Rear dozer up kg *5100 4500 4500 3000 3200 2100 2900 1900

(Load over front) lb *11,240 9,920 9,920 6,610 7,060 4,630 6,390 4,190

Rear dozer down kg *5100 *5100 *4900 3400 *4200 2400 *3200 2100

(Load over rear) lb *11,240 *11,240 *10,800 7,500 *9,260 5,290 *7,060 4,630

4.5 m Rear stab down kg *5100 *5100 *4900 4000 *4200 2800 *3200 2600 7.88 m

(15.0 ft) (Load over rear) lb *11,240 *11,240 *10,800 8,820 *9,260 6,170 *7,060 5,730 (25'10")

2 sets stab down kg *5100 *5100 *4900 *4900 *4200 3900 *3200 *3200

(Load over front) lb *11,240 *11,240 *10,800 *10,800 *9,260 8,600 *7,060 *7,060

Dozer and stab down kg *5100 *5100 *4900 4700 *4200 3300 *3200 3100

(Load over front) lb *11,240 *11,240 *10,800 10,360 *9,260 7,280 *7,060 6,830

Rear dozer up kg *8000 7700 6700 4400 4500 3000 3200 2100 2700 1700

(Load over front) lb *17,640 16,980 14,770 9,700 9,920 6,610 7,060 4,630 5,950 3,750

Rear dozer down kg *8000 8000 *6800 4900 *5400 3400 *4600 2400 *3200 2000

(Load over rear) lb *17,640 17,640 *14,990 10,800 *11,910 7,500 *10,140 5,290 *7,060 4,410

3.0 m Rear stab down kg *8000 *8000 *6800 5900 *5400 3900 4200 2800 *3200 2400 8.28 m

(10.0 ft) (Load over rear) lb *17,640 *17,640 *14,990 13,010 *11,910 8,600 9,260 6,170 *7,060 5,290 (27'2")

2 sets stab down kg *8000 *8000 *6800 *6800 *5400 *5300 *4600 3900 *3200 *3200

(Load over front) lb *17,640 *17,640 *14,990 *14,990 *11,910 *11,690 *10,140 8,600 *7,060 *7,060

Dozer and stab down kg *8000 *8000 *6800 *6800 *5400 4600 *4600 3300 *3200 2800

(Load over front) lb *17,640 *17,640 *14,990 *14,990 *11,910 10,140 *10,140 7,280 *7,060 6,170

Rear dozer up kg *10 600 7500 6500 4300 4400 3000 3100 2000 2600 1700

(Load over front) lb *23,370 16,540 14,330 9,480 9,700 6,610 6,830 4,410 5,730 3,750

Rear dozer down kg *10 600 8700 *7900 4900 *5900 3300 4600 2300 *3400 1900

(Load over rear) lb *23,370 19,180 *17,420 10,800 *13,010 7,280 10,140 5,070 *7,500 4,190

1.5 m Rear stab down kg *10 600 *10 600 *7900 5800 5700 3900 4100 2700 *3400 2300 8.36 m

(5.0 ft) (Load over rear) lb *23,370 *23,370 *17,420 12,790 12,570 8,600 9,040 5,950 *7,500 5,070 (27'5")

2 sets stab down kg *10 600 *10 600 *7900 *7900 *5900 5300 *4800 3800 *3400 3200

(Load over front) lb *23,370 *23,370 *17,420 *17,420 *13,010 11,690 *10,580 8,380 *7,500 7,060

Dozer and stab down kg *10 600 *10 600 *7900 6800 *5900 4600 *4800 3300 *3400 2700

(Load over front) lb *23,370 *23,370 *17,420 14,990 *13,010 10,140 *10,580 7,280 *7,500 5,950

Rear dozer up kg *11 900 7500 6600 4200 4400 2900 3100 2000 2700 1700

(Load over front) lb *26,240 16,540 14,550 9,260 9,700 6,390 6,830 4,410 5,950 3,750

Rear dozer down kg *11 900 8600 *8300 4800 *6100 3200 4500 2200 *3700 1900

(Load over rear) lb *26,240 18,960 *18,300 10,580 *13,450 7,060 9,920 4,850 *8,160 4,190

Rear stab down kg *11 900 10 600 *8300 5700 5700 3900 4000 2700 3500 2300 8.17 m

(Load over rear) lb *26,240 23,370 *18,300 12,570 12,570 8,600 8,820 5,950 7,720 5,070 (26'10")

Ground

2 sets stab down kg *11 900 *11 900 *8300 *7900 *6100 *5300 *4800 3800 *3700 3300

(Load over front) lb *26,240 *26,240 *18,300 *17,420 *13,450 *11,690 *10,580 8,380 *8,160 7,280

Dozer and stab down kg *11 900 *11 900 *8300 6700 *6100 4600 *4800 3200 *3700 2800

(Load over front) lb *26,240 *26,240 *18,300 14,770 *13,450 10,140 *10,580 7,060 *8,160 6,170

Rear dozer up kg 12 600 7100 6600 4000 4200 2700 3000 1900 2900 1800

(Load over front) lb 27,780 15,650 14,550 8,820 9,260 5,950 6,610 4,190 6,390 3,970

Rear dozer down kg *13 200 8300 *8300 4600 *6100 3000 *4300 2100 *4100 2100

(Load over rear) lb *29,100 18,300 *18,300 10,140 *13,450 6,610 *9,480 4,630 *9,040 4,630

-1.5 m Rear stab down kg *13 200 10 700 *8300 5600 5700 3700 4000 2600 3800 2500 8.67 m

(-5.0 ft) (Load over rear) lb *29,100 23,590 *18,300 12,350 12,570 8,160 8,820 5,730 8,380 5,510 (28'5")

2 sets stab down kg *13 200 *13 200 *8300 *8000 *6100 5200 *4300 3700 *4100 3600

(Load over front) lb *29,100 *29,100 *18,300 *17,640 *13,450 11,460 *9,480 8,160 *9,040 7,940

Dozer and stab down kg *13 200 12 900 *8300 6800 *6100 4400 *4300 3100 *4100 3000

(Load over front) lb *29,100 28,440 *18,300 14,990 *13,450 9,700 *9,480 6,830 *9,040 6,610

Rear dozer up kg 12 800 7000 6400 3900 4100 2500

(Load over front) lb 28,220 15,430 14,110 8,600 9,040 5,510

Rear dozer down kg *13 400 8200 *8600 4400 *5600 2900

(Load over rear) lb *29,540 18,080 *18,960 9,700 *12,350 6,390

-3.0 m Rear stab down kg *13 400 10 500 *8600 5400 5500 3500

(-10.0 ft) (Load over rear) lb *29,540 23,150 *18,960 11,910 12,130 7,720

2 sets stab down kg *13 400 *13 400 *8600 8000 *5600 5100

(Load over front) lb *29,540 *29,540 *18,960 17,640 *12,350 11,240

Dozer and stab down kg *13 400 13 200 *8600 6600 *5600 4200

(Load over front) lb *29,540 29,100 *18,960 14,550 *12,350 9,260

Rear dozer up kg *11 000 6800 *5500 3700

(Load over front) lb *24,250 14,990 *12,130 8,160

Rear dozer down kg *11 000 8000 *5500 4300

(Load over rear) lb *24,250 17,640 *12,130 9,480

-4.5 m Rear stab down kg *11 000 10 300 *5500 5300

(-15.0 ft) (Load over rear) lb *24,250 22,710 *12,130 11,690

2 sets stab down kg *11 000 *11 000 *5500 *5500

(Load over front) lb *24,250 *24,250 *12,130 *12,130

Dozer and stab down kg *11 000 11 000 *5500 *5500

(Load over front) lb *24,250 24,250 *12,130 *12,130

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 31

M315D Wheel Excavator specifications

One-piece Boom Industrial Stick – 3.1 m (10'2") stick

➤

Industrial Stick

3.1 m (10'2")

➤

Load Point

➤

Height

Load Radius Over Front or Rear

Load Radius Over Side

Load at Maximum Reach

* Indicates that the load is limited by

hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard JISO 10567. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.

• All lift capacities are calculated with Heavy Lift on.

• Oscillating axle must be locked.

• All values are calculated at the stick-nose.

3.0 m

Undercarriage configuration

Rear dozer up kg *4500 3000

(Load over front) lb *9,920 6,610

Rear dozer down kg *4500 3400

(Load over rear) lb *9,920 7,500

6.0 m Rear stab down kg *4500 4000

(20.0 ft) (Load over rear) lb *9,920 8,820

2 sets stab down kg *4500 *4500

(Load over front) lb *9,920 *9,920

Dozer and stab down kg *4500 *4500

(Load over front) lb *9,920 *9,920

Rear dozer up kg 4500 2900 3200 2100 3100 2000

(Load over front) lb 9,920 6,390 7,060 4,630 6,830 4,410

Rear dozer down kg *4700 3300 *3600 2400 *3200 2300

(Load over rear) lb *10,360 7,280 *7,940 5,290 *7,060 5,070

4.5 m Rear stab down kg *4700 3900 *3600 2800 *3200 2700 7.63 m

(15.0 ft) (Load over rear) lb *10,360 8,600 *7,940 6,170 *7,060 5,950 (25'0")

2 sets stab down kg *4700 *4700 *3600 *3600 *3200 *3200

(Load over front) lb *10,360 *10,360 *7,940 *7,940 *7,060 *7,060

Dozer and stab down kg *4700 4600 *3600 3300 *3200 *3200

(Load over front) lb *10,360 10,140 *7,940 7,280 *7,060 *7,060

Rear dozer up kg *6500 4200 4300 2800 3100 2100 2800 1900

(Load over front) lb *14,330 9,260 9,480 6,170 6,830 4,630 6,170 4,190

Rear dozer down kg *6500 4800 *5300 3200 *4600 2300 *3200 2100

(Load over rear) lb *14,330 10,580 *11,690 7,060 *10,140 5,070 *7,060 4,630

3.0 m Rear stab down kg *6500 5800 *5300 3800 4100 2800 *3200 2500 8.03 m

(10.0 ft) (Load over rear) lb *14,330 12,790 *11,690 8,380 9,040 6,170 *7,060 5,510 (26'4")

2 sets stab down kg *6500 *6500 *5300 *5300 *4600 3800 *3200 *3200

(Load over front) lb *14,330 *14,330 *11,690 *11,690 *10,140 8,380 *7,060 *7,060

Dozer and stab down kg *6500 *6500 *5300 4500 *4600 3300 *3200 3000

(Load over front) lb *14,330 *14,330 *11,690 9,920 *10,140 7,280 *7,060 6,610

Rear dozer up kg 6300 3900 4200 2700 3100 2000 2700 1800

(Load over front) lb 13,890 8,600 9,260 5,950 6830 4,410 5,950 3,970

Rear dozer down kg *7800 4500 *5800 3000 4500 2300 *3400 2000

(Load over rear) lb *17,800 9,920 *12,790 6,610 9,920 5,070 *7,500 4,410

1.5 m Rear stab down kg *7800 5400 5600 3700 4000 2700 *3400 2400 8.12 m

(5.0 ft) (Load over rear) lb *17,800 11,910 12,350 8,160 8,820 5,950 *7,500 5,290 (26'8")

2 sets stab down kg *7800 *7800 *5800 5200 *4800 3800 *3400 3400

(Load over front) lb *17,800 *17,800 *12,790 11,460 *10,580 8,380 *7,500 7,500

Dozer and stab down kg *7800 6600 *5800 4400 *4800 3200 *3400 2900

(Load over front) lb *17,800 14,550 *12,790 9,700 *10,580 7,060 *7,500 6,390

Rear dozer up kg *5800 *5800 6100 3700 4100 2600 3000 1900 2800 1800

(Load over front) lb *12,790 *12,790 13,450 8,160 9,040 5,730 6,610 4,190 6,170 3,970

Rear dozer down kg *5800 *5800 *8400 4300 *6200 2900 4400 2200 *3800 2000

(Load over rear) lb *12,790 *12,790 *18,520 9,480 *13,670 6,390 9,700 4,850 *8,380 4,410

Rear stab down kg *5800 *5800 *8400 5200 5500 3500 4000 2600 3700 2500 7.92 m

(Load over rear) lb *12,790 *12,790 *18,520 11,460 12,130 7,720 8,820 5,730 8,160 5,510 (26'0")

Ground

2 sets stab down kg *5800 *5800 *8400 7800 *6200 5100 *4900 3700 *3800 3400

(Load over front) lb *12,790 *12,790 *18,520 17,800 *13,670 11,240 *10,800 8,160 *8,380 7,500

Dozer and stab down kg *5800 *5800 *8400 6400 *6200 4200 *4900 3100 *3800 2900

(Load over front) lb *12,790 *12,790 *18,520 14,110 *13,670 9,260 *10,800 6,830 *8,380 6,390

Rear dozer up kg *8500 6400 6000 3600 4000 2500 3000 2000

(Load over front) lb *18,740 14,110 13,230 7,940 8,820 5,510 6,610 4,410

Rear dozer down kg *8500 7600 *8200 4200 *6000 2900 4500 2200

(Load over rear) lb *18,740 16,760 *18,080 9,260 *13,230 6,390 9,920 4,850

-1.5 m Rear stab down kg *8500 *8500 *8200 5100 5400 3500 4000 2700 7.41 m

(-5.0 ft) (Load over rear) lb *18,740 *18,740 *18,080 11,240 11,910 7,720 8,820 5,950 (24'4")

2 sets stab down kg *8500 *8500 *8200 7700 *6000 5000 *4500 3700

(Load over front) lb *18,740 *18,740 *18,080 16,980 *13,230 11,020 *9,920 8,160

Dozer and stab down kg *8500 *8500 *8200 6300 *6000 4200 *4500 3200

(Load over front) lb *18,740 *18,740 *18,080 13,890 *13,230 9,260 *9,920 7,060

Rear dozer up kg *10 000 6500 6000 3600 4000 2500

(Load over front) lb *22,050 14,330 13,230 7,940 8,820 5,510

Rear dozer down kg *10 000 7600 *7100 4200 *5100 2900

(Load over rear) lb *22,050 16,760 *15,650 9,260 *11,240 6,390

-3.0 m Rear stab down kg *10 000 9800 *7100 5100 *5100 3500

(-10.0 ft) (Load over rear) lb *22,050 21,610 *15,650 11,240 *11,240 7,720

2 sets stab down kg *10 000 *10 000 *7100 *7100 *5100 5000

(Load over front) lb *22,050 *22,050 *15,650 *15,650 *11,240 11,020

Dozer and stab down kg *10 000 *10 000 *7100 6300 *5100 4200

(Load over front) lb *22,050 *22,050 *15,650 13,890 *11,240 9,260

Rear dozer up kg *6500 *6500 *4600 3800

(Load over front) lb *14,330 *14,330 *10,140 8,380

Rear dozer down kg *6500 *6500 *4600 4300

(Load over rear) lb *14,330 *14,330 *10,140 9,480

-4.5 m Rear stab down kg *6500 *6500 *4600 *4600

(-15.0 ft) (Load over rear) lb *14,330 *14,330 *10,140 *10,140

2 sets stab down kg *6500 *6500 *4600 *4600

(Load over front) lb *14,330 *14,330 *10,140 *10,140

Dozer and stab down kg *6500 *6500 *4600 *4600

(Load over front) lb *14,330 *14,330 *10,140 *10,140

(10.0 ft)

4.5 m

(15.0 ft)

6.0 m

(20.0 ft)

7.5 m

(25.0 ft)

m/ft

Page 32

M315D Wheel Excavator specifications

Standard Equipment

Standard equipment may vary. Consult your Caterpillar dealer for details.

Engine

Automatic engine speed control Automatic starting aid Cat C4.4 with ACERT™ Technology U.S. EPA Tier 3 Fuel filter Fuel/water separator with level indicator Muffler

Hydraulics

Cat XT™-6 ES hoses Heavy lift mode Load-Sensing Plus hydraulic system Manual work modes (economy, power) Oil cooler Separate swing pump Stick regeneration circuit

Undercarriage

Heavy-Duty axles with advanced travel motor with

adjustable braking force Oscillating front axle with remote greasing Pin-on design preparation for dozer blade and outriggers Tires, 10.00-20 16PR, dual Tool box in undercarriage Two-piece drive shaft Two-speed transmission with manual and automatic

gear shifting Undercarriage storage box

Other Equipment

Automatic swing brake Caterpillar Datalink and Electronic Technician capability Caterpillar Product Link Counterweight 3500 kg (7,716 lb) Door locks and caps locks with Caterpillar one-key security

system Mirrors, frame and cab S•O•SSMquick sampling valves for engine oil, hydraulic oil

and coolant

Operator Station

Adjustable armrests Ash tray with cigarette lighter (24 volt) Beverage cup/can holder Bolt-on FOGS capability Bottle holder Coat hook Floor mat, washable, with storage compartment Fully adjustable suspension seat Heater and defroster Joysticks Laminated front windshield Left side console, tiltable, with lock out for all controls Literature compartment behind seat Literature holder in right console Mobile phone holder Monitor and gauges with full color graphical display

Information and warning messages in local language Gauges for fuel level, engine coolant and hydraulic oil

temperature Filters/fluids change interval, working hour Indicators for headlights, turning signal, low fuel, engine

dial setting Clock with 10 day backup battery

Parking brake Parallel mounted top and bottom wiper and washer Positive filtered ventilation, pressurized cab Power supply, 12V-7A Rear window, emergency exit Retractable seat belt Seat with adjustable mechanical suspension Skylight Sliding door windows Steering column, tiltable Storage area suitable for a lunch box Sunshade for windshield and skylight

Electrical

Alternator, 75 amp Lights

Boom working light Cab interior Roading lights (two front, two rear)

Maintenance free batteries Main shut-off switch Signal/warning horn

Page 33

M315D Wheel Excavator specifications

Optional Equipment

Optional equipment may vary. Consult your Caterpillar dealer for details.

Operator Station

Adjustable hydraulic sensitivity Air conditioner, heater and defroster with automatic

climate control

Camera mounted on counterweight, displays through

cab monitor Falling objects guard Fixed cab riser 1200 mm (4 ft) Lid for storage compartment Radio

Radio, AM/FM stereo (24V)

Radio ready mounting (12 V or 24 V) at rear location

including speakers and 12 V converter

Seat

Adjustable high-back seat with mechanical suspension

Adjustable high-back seat with air suspension (vertical)

Adjustable high-back deluxe seat with headrest, air

suspension (horizontal and vertical), two-step seat heater, automatic weight adjustments, ventilated seat cushions, pneumatically adjustable lumbar support

Headrest Travel speed lock Vandalism guards Visor for rain protection Windshield

One-piece high impact resistant

50/50 split, openable

70/30 spilt, openable

Undercarriage

Dozer blade, front and/or rear mounted, with remote greasing Optional tires

Dual tires

11.00-20 dual tires

10.00-20 dual solid rubber

Single tires

18-R 19.5 XF single

600/40-22.5 single Outriggers, front and/or rear mounted Second tool box for undercarriage Spacer rings for tires Wide axles

Other Equipment

Auto-lube system for the implements and swing gear Cat Machine Security System Counterweight 3900 kg (8,598 lb) Custom paint Heated mirrors, frame and cab Joystick steering

Enables steering of the machine in first gear using the

sliding switch on joystick Lockable tool box in upper frame Ride control, for increased comfort while traveling and

working

Waste package with cyclone air pre-cleaner, reversible fan

with programmable time

Auxiliary Controls and Lines

Auxiliary boom and stick lines Anti-drift valves for bucket, stick, VA Boom and tool

control/multi-function circuits

Basic control circuits:

Single action

One-way, high pressure circuit, for hammering

application

Medium pressure

Two-way, medium pressure circuit, for rotating

or tilting of work tools

Tool control/multi function

One/two-way high pressure for hammer application

or opening and closing of a work tool

Programmable flow and pressure for up to 10 work

tools – selection via monitor

Second high pressure

Additional two-way, high pressure circuit, for tools

requiring a second high or medium pressure function

Quick coupler control Biodegradable hydraulic oil (synthetic ester based) Lowering control devices for boom and stick

Front Linkage

Booms

One-piece boom, 5.05 m (16 ft 6 in)

Offset boom, 5.2 m (17 ft 1 in)

Variable adjustable boom (two piece), 5.20 m (17 ft 1 in) Bucket linkage with diverter valve Sticks

2.1 m (6 ft 11 in) stick

2.4 m (7 ft 10 in) stick

2.6 m (8 ft 6 in) stick

3.1 m (10 ft 2 in) Industrial stick with drop nose

Electrical

Back-up alarm with three selectable modes Heavy-duty maintenance free batteries Refueling pump Roading lights, rear consisting of long life LED modules Rotating beacon on cab Working lights, cab mounted (front and rear)

Page 34

M315D Wheel Excavator specifications

Notes

Page 35

M315D Wheel Excavator specifications

Notes

Page 36

For more complete information on Cat products, dealer services,

and industry solutions, visit us on the web at www.cat.com

Printed in U.S.A.

Materials and specifications are subject to change without notice.

Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.

CAT, CATERPILLAR, ACERT, HEES, their respective logos, “Caterpillar Yellow” and the

POWER EDGE trade dress, as well as corporate and product identity used herein,

are trademarks of Caterpillar and may not be used without permission.

AEHQ5754-01 (02-07)

Replaces AEHQ5754

M315D Wheel Excavator

Milton CAT M315D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Engine

Hydraulics

Operator Comfort

Undercarriage

Booms and Sticks

Work Tools

Versatility

Serviceability

Environmentally Responsible Design

Complete Customer Support

Dimensions

VA Boom, One-piece and Offset Boom Working Ranges

Bucket Specifications

VA Boom – 2.1 m (6'11") stick

VA Boom – 2.4 m (7'10") stick

VA Boom – 2.6 m (8'6") stick

One-piece Boom – 2.1 m (6'11") stick

One-piece Boom – 2.4 m (7'10") stick

One-piece Boom – 2.6 m (8'6") stick

Offset Boom – 2.1 m (6'11") stick

Offset Boom – 2.4 m (7'10") stick

VA Boom Industrial Stick – 3.1 m (10'2") stick

One-piece Boom Industrial Stick – 3.1 m (10'2") stick

Standard Equipment

Optional Equipment

Notes