Installation in a tall cabinet ............................................................................... 93
Installing the oven ............................................................................................... 94
5
IMPORTANT SAFETY INSTRUCTIONS
When using the appliance, follow basic safety precautions, including the
following:
Read all instructions before installation and use of the oven to prevent
accidents and machine damage.
This appliance complies with current safety requirements.
Improper use of the appliance can lead to personal injury and
material damage.
Read all instructions before installing or using the oven for the first
time. Only use the appliance for its intended purpose.
Keep these operating instructions in a safe place and pass them
on to any future user.
Appropriate use
This appliance is intended for residential use only. Use only as
described in these operating instructions.
This appliance is not intended for outdoor use.
Only use this oven for residential cooking, and the purposes
described in this manual.
Other uses are not permitted and can be dangerous.
Risk of Fire! Do not use this oven to store or dry flammable
materials.
Persons who lack physical, sensory or mental abilities, or
experience with the appliance should not use it without supervision
or instruction by a responsible person.
6
IMPORTANT SAFETY INSTRUCTIONS
Safety with children
Children should not be left alone or unattended in an area where
an oven is in use. Never allow children to operate, sit or stand on any
part of the oven. Caution: Do not store items of interest to children
in cabinets above an oven. Children climbing on the oven to reach
these items could be injured.
Burn Hazard - Do not allow children to use the oven. Failure to do
so can result in severe burns or serious injury.
Danger of suffocation! Ensure that any plastic wrappings, bags,
etc. are disposed of safely and kept out of the reach of children.
Danger of burns. The oven gets hot at the oven door glass, the
vapor vent, the handle and the operating controls. Do not allow
children to touch or play in, on or near the oven.
Danger of burns.
Children's skin is more sensitive to high temperatures than that of
adults. The oven becomes hotter during self-cleaning than it does in
normal use. Do not let children touch the oven while the Self Clean
program is running.
Technical safety
This appliance must be installed and connected in compliance
with the installation instructions.
Unauthorized installation, maintenance, and repairs can cause
considerable danger for the user. Installation, maintenance, and
repairs must only be carried out by a Miele authorized technician.
Maintenance by the user: Never repair or replace any part of the
appliance unless the instructions specifically recommend doing so.
Service work may only be performed by a qualified technician.
Before installing the oven, check for externally visible damage. Do
not operate a damaged appliance.
7
IMPORTANT SAFETY INSTRUCTIONS
Reliable and safe operation of the oven can only be guaranteed if
it is connected to the power supply.
To guarantee the electrical safety of this appliance, continuity
must exist between the appliance and an effective grounding
system. This appliance must be grounded. Connect only to properly
grounded outlet. See “Electrical connection - GROUNDING
INSTRUCTIONS”. It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
Proper installation: Make sure that your appliance has been
installed correctly and that it has been grounded by a qualified
technician.
Before installation, make sure that the voltage and frequency
listed on the data plate correspond with the household electrical
supply. This data must correspond to prevent injury and machine
damage. Consult a qualified electrician if in doubt.
Before installation or service, disconnect the power supply to the
work area by
– removing the fuse,
– “tripping” the circuit breaker, or
– unplugging the unit. Pull the plug not the cord.
Extension cords do not guarantee the required safety of the
appliance (e.g. danger of overheating). Do not use an extension cord
to connect this appliance to electricity.
The oven is not to be operated until it has been properly installed
within cabinetry.
Danger of electric shock!
Under no circumstances open the outer casing of the appliance.
This appliance must not be used in a non-stationary location (e.g.
on a ship).
8
IMPORTANT SAFETY INSTRUCTIONS
Do not repair or replace any part of the appliance unless
specifically recommended in the operating instructions. All other
servicing should be referred to a qualified technician.
Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
In order for the oven to function correctly, it requires an adequate
supply of cool air. Ensure that the air flow is not impaired (e.g.
insulation in the cabinetry). Also be sure that the cool air supply is
not heated by other sources nearby.
If the oven is installed behind a cabinet door, do not close the
door while the oven is in operation. Heat and moisture can build up
behind the closed door and cause damage to the oven, cabinetry
and flooring. Do not close the door until the oven has completely
cooled down.
Correct use
The oven becomes very hot while in use. Use caution to
ensure that you are not burned on the heating elements or interior
surfaces of the oven. Use pot holders when placing food in the
oven, adjusting the racks, etc. in a hot oven.
Caution: Heating elements may be hot even though they are not
glowing. Interior surfaces of an oven become hot enough to cause
burns. External parts of the oven such as the door glass, vents, and
the control panel can become hot. During and after use, do not
touch, or let clothing or other flammable materials come into contact
with heating elements or interior surfaces of the oven until they have
had sufficient time to cool.
Do not let food sit in the oven for more than one hour before or
after cooking. Doing so can result in food poisoning or sickness.
9
IMPORTANT SAFETY INSTRUCTIONS
It is important that the heat is evenly distributed throughout the
food being cooked. This can be achieved by stirring and/or turning
the food.
Use only dry, heat-resistant potholders. Moist or damp potholders
used on hot surfaces may result in steam burns. Do not let
potholders come in contact with oil or grease. Do not substitute dish
towels or other bulky items for potholders. Do not let potholders
touch hot heating elements.
Loose fitting or hanging garments present a fire hazard. Wear
proper apparel while operating the appliance.
Do not heat unopened containers of food in the oven, pressure
may cause the containers to burst and result in injury.
Never pour cold water onto hot surfaces in a hot oven.
The steam created could cause serious burns or scalding and the
sudden change in temperature can damage the enamel in the oven.
To prevent burns, always place oven racks at their desired height
while the oven is cool. If the rack must be moved while the oven is
hot, do not let pot holders touch hot heating elements.
Open the door carefully to allow hot air or steam to escape before
placing or removing food.
To prevent burns, allow the heating elements to cool before
cleaning by hand.
Do not leave the oven door open unnecessarily as someone may
trip over it or be injured by it.
Never leave the appliance unattended when cooking with oil or
fat. They can ignite if overheated. Do not use water on grease
fires.Turn off the oven immediately and suffocate the flames by
keeping the oven door closed.
Smother the fire or flames, or use a dry chemical extinguishing
agent or foam fire extinguisher.
10
IMPORTANT SAFETY INSTRUCTIONS
Never store flammable liquids and materials in, above or under an
oven, or near cooking surfaces.
Do not use the oven to heat the room. The high temperatures
radiated could cause objects near the oven to catch fire.
WARNING
NEVER use this appliance as a space heater to heat or warm the
room. Doing so may result in carbon monoxide poisoning and
overheating of the oven.
WARNING
NEVER use this appliance as storage space. Doing so may result
in carbon monoxide poisoning and overheating of the oven.
WARNING
NEVER cover any slots, holes or passages in the oven bottom or
cover an entire rack with materials such as aluminum foil. Doing so
blocks air flow through the oven and may cause carbon monoxide
poisoning. Aluminum foil linings may also trap heat, causing a fire
hazard.
Broiling food for an excessively long time can cause it to dry out
and may result in the food catching fire.
Do not exceed recommended broiling times.
Some foods dry out very quickly and can be ignited by high
broiling temperatures. Do not use broiling modes for crisping rolls or
bread, or to dry flowers or herbs. Instead use the Convection Bake
or Surround modes.
Use caution when using alcohol in your recipes. Alcohol
evaporates at high temperatures but may, in rare circumstances,
combust on the hot heating elements.
11
IMPORTANT SAFETY INSTRUCTIONS
Plastic containers, which are not heat-resistant, melt and may
ignite at high temperatures and can damage the oven. Use only
plastic containers that are indicated by the manufacturer as being
suitable for use in ovens.
When residual heat is used to keep food warm, the high level of
humidity and condensation can cause damage in the oven. The
control panel, countertop or cabinetry may also be damaged.
Do not switch the oven off completely while food is inside it, but
select the lowest possible temperature for the oven mode you are
using. This will ensure the fan will automatically continue to run.
It is recommended to cover all cooked food that is left in the oven
to be kept warm. This will prevent moisture from condensing on the
interior of the oven.
To avoid damage, do not place aluminum foil, pots, pans or
baking sheets directly on the oven floor. This can cause a build up of
heat that will damage the oven floor.
Do not slide pots or pans on the oven floor. This could scratch
and damage the surface.
The door can support a maximum weight of 33lbs (15kg). Do not
sit on or lean against an open door, and do not place heavy objects
on it. Also make sure that nothing can get trapped between the door
and the oven cavity. The oven could get damaged.
This oven must only be used for cooking food. Fumes, vapors or
heat given off by glues, plastics or flammable liquids and materials
could be hazardous. Do not use it as a dryer, kiln, dehumidifier, etc.
Do not obstruct the flow of combustion and ventilation air.
Do not let metal objects (aluminum foil, pans) come in contact
with the heating element.
Make certain that the power cords of small appliances do not
come in contact with or get caught in the oven door.
12
IMPORTANT SAFETY INSTRUCTIONS
When baking frozen pizzas or pies, place them on the wire rack
lined with parchment paper. Do not use the baking tray or the
roasting pan for frozen foods with a large surface area. The tray or
pan could become warped and difficult to remove from the oven
when hot. Frozen foods like french fries, chicken nuggets, etc. can
be baked on the baking tray.
Cleaning and maintenance
Do not use a steam cleaner to clean this oven.
Steam could penetrate electrical components and cause a short
circuit.
Only clean parts listed in these Operating and Installation
Instructions.
Scratches on the door glass can cause the glass to break.
Do not use abrasive cleaners, hard sponges, brushes or sharp metal
tools to clean the door glass.
The shelf runners can be removed for cleaning purposes (see
“Cleaning and care”). Ensure they are correctly fitted after cleaning
and never operate the oven without the shelf runners inserted.
There is a seal around the oven interior which seals the inside of
the door. Take care not to rub, damage or move the gasket.
Do not use oven cleaners. Commercial oven cleaners or oven
liners of any kind should not be used in or around any part of the
oven.
Debris should be removed before running the Self Clean program.
If not removed this debris can smoke causing the self-cleaning
program to turn itself off.
13
IMPORTANT SAFETY INSTRUCTIONS
Accessories
Use only genuine original Miele parts. If parts or accessories from
other manufacturers are used, the warranty will become void.
Only use the Miele roast probe supplied with this oven. If it is
faulty, it must only be replaced with a Miele genuine roast probe.
The plastic on the roast probe can melt at very high temperatures.
Do not use the roast probe when using the broil functions (exception:
Convection Broil). Do not store the roast probe in the oven if it is
not in use.
The high temperatures used during self-cleaning will damage
accessories that are not designed for cleaning in the Self Clean
program. Please remove these accessories from the oven before
starting the Self Clean program. This also applies to accessories
purchased separately (see “Cleaning and care”).
California Proposition 65
WARNING
This product can expose you to chemicals mineral oils1, Nickel
(Metallic)1, Diisononyl phthalate (DINP)1 and Di-isodecyl phthalate
(DIDP)2, which are known to the State of California to cause
1
cancer and 2birth defects or 2other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY
14
a
Control panel
b
Door with contact switch* and lock for Self Clean program
c
Browning / Broiling element
d
Oven interior lighting
e
Connection socket for the roast probe
f
Twin power convection fans with heating element
g
Runners with 6 shelf levels
h
Data plate
i
Clean Glass door
Guide to the oven
* This switch ensures that the heating elements and the convection fans turn off
when the door is opened during use.
15
Control panel
a
On / Off button
Turns the oven On and Off
b
Sensor buttons
To select operating modes, settings and menu items
c
Display
Displays the time of day and information on the operation
d
Sensor buttons 0-9
Numeric keypad to enter values
e
“Timer” sensor button
To set the timer
f
“Light” sensor button
For turning the oven interior lighting on and off
g
“Back” sensor button
To go back one step at a time
h
Optical interface
(for service technician use only)
16
Control panel
Sensor buttons
The sensors react to touch. Each touch is confirmed with an audible tone. This
tone can be turned off (see “Settings – Keypad tone”).
Sensor
button
For selecting
0–9Numerical keypad
TimerTo set the timerIf a list of options is showing in the display or if a
LightFor turning the
BackTo go back a step
FunctionNotes
A menu option can be selected by touching the
options and
scrolling through
the list of options
for setting values
oven interior
lighting on and off
illuminated sensor next to it.
The numerical keypad is used to set values, e.g.
temperatures and durations.
cooking process is running, a timer duration (e.g.,
when boiling eggs) can be set at any point.
If the time of day display is turned off, the “Timer”
button will not react until the oven is turned on.
If a list of options is showing in the display or if a
cooking process is running, touching “Light” will
turn the oven interior lighting on or off.
If the time of day display is turned off, the “Light”
sensor button will not react until the oven is turned
on.
The oven interior lighting turns off after 15 seconds
during cooking or remains constantly turned on,
depending on the setting selected.
17
Control panel
Display
The display is used for showing the
time of day or information about
modes, temperatures, cooking
durations, MasterChef programs and
settings. Information or a list of options
is shown on the display depending on
the function selected.
After turning the oven on with the On/
Off sensor button , the main menu
will appear:
If a cooking process is running,
selecting Change will call up a list of
options which can be set or changed
for the cooking process in progress.
– Temperature
– Core Temperature (only when using the
roast probe)
– Duration
– Ready at
– Start at (only if Duration / Ready at has
been set)
A menu item can be selected by
touching the illuminated sensor
next to the menu item.
Options can then be accessed by
touching the illuminated sensor
next to OK.
– PreHeating (only available in some
operating modes)
– Operating Modes
18
Control panel
Symbols
The following symbols may appear in the display:
SymbolDescription
Timer
Allocates an illuminated Sensor button to an option and
indicates that the option can be selected.
If more than four options are available a bar will appear on the
The end of a list is indicated by a dotted line. By scrolling down
Some settings, e.g. display brightness and buzzer volume, are
A check indicates the currently active setting. will not be
This symbol indicates that there is additional information and
The system lock or sensor lock is active (see “Settings – Safety”).
Program finished
Core temperature when using the roast probe
right-hand side of the display. Use the allocated sensors to scroll
through the list.
further, you will reach the beginning of the list again.
selected using a bar chart.
displayed and the corresponding sensor will not be illuminated.
advice about using the oven. Select OK to access the
information.
The oven cannot be used.
19
Features
Model numbers
A list of the ovens described in these
operating instructions can be found on
the back page.
Data plate
The data plate located on the front
frame of the oven is visible when the
door is open.
Printed on the data plate are the model
number, serial number and the
connection data (voltage/frequency/
maximum rated load) of the oven.
Have this information available when
contacting Miele Technical Service.
Items included
The following items are included with
this appliance:
– the Operating and Installation
Instructions,
– screws for securing your appliance
into the cabinetry, and
– various accessories.
Standard and optional
accessories
Accessories vary depending on
model. All ovens are supplied with
shelf runners, a universal tray and a
wire oven rack. Depending on the
model, your oven may also come with
the additional accessories listed.
All accessories and cleaning and care
products in these instructions are
designed to be used with Miele ovens.
These can be ordered from the Miele
web store, Miele Technical Service, or
from your Miele dealer.
When ordering, please have ready the
model number of your oven and of the
desired accessories.
Shelf runners
The shelf runners are located on the
right and left-hand sides of the oven
with the levels for inserting accessories.
The shelf level numbers are indicated
on the front of the oven frame.
Each level consists of a strut on which
you can place the wire oven rack, for
example.
20
The runners can be removed. See
“Cleaning and Care”.
Features
Universal tray and Wire oven rack
Universal tray HUBB30-1
Wire oven rack HBBR30-2
Non-tip safety notches are located on
the shorter sides of these
accessories.These prevent the trays
being pulled completely out of the side
runners when you only wish to pull
them out partially.
Always place the wire oven rack on the
runner with the notch facing down.
FlexiClips with wire rack
HFCBBR30-2
The FlexiClips with wire rack can be
mounted on any shelf level and pulled
completely out of the oven This allows
you to see the food easily.
The FlexiClips with wire rack is pushed
in and then locked onto a level.
The rack can hold a maximum of 33 lbs
(15 kg).
Installing and removing the FlexiClips
with wire rack
Danger of burns! Make sure the
heating elements are turned off and
that the oven cavity is cool.
Do not pull the FlexiClips apart
during installation or removal.
When using the universal tray, place it
directly on the wire oven rack.
Hold the FlexiClips with wire rack with
both hands and position it in front of
the desired level.
Insert the FlexiClips with wire rack
onto the level (1.) and slide it along
the struts of the level (2.) until it clicks
into place.
21
Features
If the FlexiClips with wire rack jams
when sliding it onto the level, pull it
out using some force and reinsert.
To removing the FlexiClips with wire
rack:
Push the FlexiClips with wire rack in
all the way.
Using both hands lift the front of the
FlexiClips with wire rack on both
sides (1.) and pull it out of the level
(2.).
Using the universal tray
When using the universal tray, place it
directly on the FlexiClips with wire
rack.
Using the roast probe
When using the roast probe do not
insert the FlexiClips with wire rack on
shelf level 5, this will block the
socket.
the underside of baked goods.
The tray can also be used for
dehydrating or drying food.
The enameled surface has been treated
with PerfectClean.
The round perforated baking trayHBFP27-1 can be used for the same
things.
The perforated baking tray can be
placed on the rack.
Grilling and Roasting insert
HGBB30-1
The grilling and roasting insert is placed
in the universal tray.
The drippings from the meat or poultry
are collected under the insert reducing
spattering in the oven. The drippings
can then be used for gravy and sauces.
The surface has been treated with
PerfectClean enamel for easy cleaning.
Round baking form HBF27-1
Perforated Gourmet baking tray
HBBL71
The perforated Gourmet baking tray has
been specially developed for the
preparation of baked goods made from
fresh yeast and quark doughs.
The tiny perforations assist in browning
22
This circular form is suitable for cooking
fresh or frozen pizzas, flat cakes, tarts
and baked goods.
The surface has been treated with
PerfectClean enamel.
Gourmet Baking Stone HBS60
Features
The baking stone is ideal for baking
dishes with a crisp bottom such as
pizza and bread.
The baking stone is made from a heat
retaining stone and is glazed. Place the
stone directly on the wire rack.
A wooden peel is supplied with it for
placing food on and off the stone.
Miele Gourmet casserole dishes can be
placed directly on the wire oven rack.
The surface of the casserole dishes has
a non-stick coating.
Gourmet casserole dishes are available
in different depths. The width and the
height are the same.
Suitable lids are available separately.
Please quote the model number when
ordering.
Depth:
81/2"(22cm)
HUB62-22 *HUB62-35 *
HBD60-22HBD60-35
Depth:
133/4"(35cm)
Roast Probe
The roast probe reliably monitors the
roasting process. The tip of the probe
continuously measure the core
temperature of the meat or poultry.
The FlexiClip runners cannot be fitted
to Shelf level 4 when using the roast
probe, as they would cover the
connection socket for the roast probe.
Opener
The opener allows you to open the
cover of the oven light.
Miele Oven Cleaner
Miele oven cleaner is suitable for
removing stubborn soiling. It is not
necessary to preheat the oven before
use.
* Suitable for use on induction cooktops
23
Features
Oven controls
The oven controls allow you to use the
various cooking modes to bake, roast
and broil.
It also allows you to access:
– the time of day display,
– a timer,
– a timer to automatically turn cooking
programs on and off,
– the MasterChef programs,
– the creating of a Favorite program,
– settings that can be customized.
Oven safety features
System lock
The system lock prevents the oven from
being used unintentionally (see
“Settings - System lock”).
The system lock will remain activated
even after a power failure.
Cooling fan
The cooling fan comes on automatically
when a cooking program is started. The
cooling fan mixes hot air from the oven
cavity with cool room air before venting
it out into the kitchen through vents
located between the appliance door
and the control panel.
The cooling fan will continue to run for a
while after a program is complete to
prevent moisture from building up in the
oven, on the control panel or
surrounding cabinetry.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
turn off automatically.
Vented oven door
The oven door is made of glass panes
that have a heat-reflective coating on
part of their surface.
During operation, air is also circulated
through the door to keep the outer
panel cool.
Safety shut-off
The oven automatically turns itself off if
it is used for an exceedingly long
period. The length of time depends on
the oven mode being used.
24
The door can be removed and
disassembled for cleaning purposes
(see “Cleaning and care”).
Safety Door Lock for Self Clean
For safety reasons, the door is locked
as soon as the Self Clean program is
started. After the self-cleaning program
has finished, the door will remain locked
until the temperature in the oven has
fallen below 535°F (280°C).
Features
PerfectClean surfaces
The revolutionary PerfectClean finish is
a smooth, non-stick surface that is
exceptionally easy to clean.
Food and grime from baking or roasting
are easily removed.
Do not use ceramic knives, as these
will scratch the PerfectClean surface.
Follow the instructions in the “Cleaning
and Care” section of this manual so the
anti-stick and easy cleaning properties
are retained.
The following have all been treated with
PerfectClean:
– Universal tray
– Grilling and Roasting insert
– Perforated baking tray
– Round baking form
Self Clean ready accessories
The following accessories can be left in
the oven during the Self Clean program.
– Shelf runners
– Wire oven rack
See “Cleaning and care” for more
information.
25
Before using for the first time
Standard settings
The oven must not be operated
until it has been properly installed
within cabinetry.
The oven will turn on automatically
when it is connected to the power
supply.
Welcome screen
A welcome greeting is displayed. You
will then be asked to select some basic
settings which are needed before the
appliance can be used.
Follow the instructions on the display.
Set the language
Scroll through the list until the desired
language appears.
Touch the illuminated sensor next
to the language you want to select.
Confirm with OK.
Select the country
Scroll through the list until the desired
country appears.
Touch the illuminated sensor next
to the country you want to select.
Confirm with OK.
Setting the voltage (electrical
version)
The voltage set must match that
of the house as to not damage the
oven.
Confirm the voltage before setting. If
in doubt contact a qualified
technician.
Select the voltage.
Confirm with OK.
Set the date
Use or to set the year, month
and day.
Confirm with OK.
Set the time of day
Use the numerical keypad to set the
time of day in hours and minutes (e.g.
1-2-1-5 for 12:15).
Confirm with OK.
Select the lit sensor button next
to am or pm.
Confirm with OK.
The time of day can be displayed in
24-hour format (see “Settings - Time
of Day - Clock Format”).
26
Time of day display
You will then be asked when you want
the time of day to show in the display
when the oven is turned off (see
“Settings - Time of day - Display”):
– On
The time is always visible in the
display.
– Off
The display appears dark to save
energy. Some modes are limited.
– Night Dimming
The time only shows in the display
between 5:00 am and 11:00 pm. It
turns off at night to save energy.
Select the desired option.
Confirm with OK.
Information regarding energy
consumption will appear in the display.
Before using for the first time
Confirm with OK.
Set up Successfully Completed is
displayed.
Confirm with OK.
The oven is now ready to use.
If you accidently select the wrong
language, follow the instructions
described in “Settings - Language ”.
27
Before using for the first time
Heating the oven
New ovens may have a slight odor
during their first use. Heating up the
oven for at least one hour with nothing
in it will eliminate the odor.
Ensure that the kitchen is well
ventilated while the appliance is
being heated up for the first time.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
Remove any protective wrapping and
sticky labels from the oven.
Take all accessories out of the oven
and clean them (see “Cleaning and
care”).
Before heating the oven up, wipe the
interior with a damp cloth to remove
any dust or bits of packaging that
may have accumulated in the oven
cavity during storage and unpacking.
After heating up for the first time
Danger of burns! Allow the oven
to cool before cleaning.
Turn on the oven.
Select Light to turn on the oven light.
Take all accessories out of the oven
and clean them by hand (see
“Cleaning and care”).
Clean the oven interior with warm
water and liquid dish soap, applied
with a soft sponge or cloth.
Dry all surfaces with a soft cloth.
Turn the lighting and the oven off.
Leave the oven door open until the
oven interior is completely dry.