Microtek ScanMaker 8700 Specifications

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r esidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver .

• Connect the equipment into an outlet on a circuit different fr om that to which the r eceiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. FCC CautionFCC Caution

FCC Caution: To assur e continued compliance, (example - use only shielded interface cables when connecting to

FCC CautionFCC Caution computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Loi Han

3715 Doolittle Drive Redondo Beach, CA 90278-1226 U.S.A.

Telephone No: 1-310-297-5000

Trade Name Model Number ScanMaker 8700 MRS-2400TPFU

FOR HOME OR OFFICE USE

Tested to Comply With FCC Standards

Federal Communications Commission Interference Statement

This equipment (Model: MRS-2400TPFU) has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energ y and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different fr om that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Note: 1) A shielded of USB interface cable with ferrite core installed on the scanner connector end must be used with this equipment. 2) AC adapter with ferrite core installed on the scanner connector end must be used with this equipment.

Caution: Caution:

Caution: Changes or modifications not expressly approved by the manufactur er r esponsible for compliance could void

Caution: Caution: the user's authority to operate the equipment.

http://www.microtek.com

June 2000

ScanMaker 8700 Specifications

Scanning Modes Color, grayscale and black & white in a single scanning pass

42-Bit Color input and output (approx. 4.3 trillion colors)

14-Bit Grayscale (approx. 16,384 shades of gray)

1-Bit Black & White (64 shades of gray simulated)

Halftone Selections 12 built-in halftone patterns

Scanning area 8.5" x 14" / 216 mm x 356 mm (reflective)

8" x 10" / 203 mm x 254 mm (transparency)

Resolution Optical: 2400 dpi x 1200 dpi

Interpolated: 9600 dpi x 9600 dpi

Dimensions (L x W x H) 24" x 15.2" x 7"

(620 mm x 386 mm x 177 mm) W eight 25.5 lbs / 11.6 kg Voltage AC 100V to 240V

47-63 Hz Environment Operating Temperature: 10° to 40°C (50° to 104°F)

Relative Humidity: 20% to 85%