McIntosh MQ-101 Owners manual
If You're in a Hurry
MQ 101 ENVIRONMENTAL EQUALIZER
A- TAPE MONITOR
The TAPE MONITOR is used when the
MQ 101 has been connected to the tape monitor
facilities of the source equipment. The control
is used in exactly the same fashion as the tape
monitor control on the source equipment.
B- LOW FREQUENCY
Selects from five different low frequency
equalization curves independently in each channel. Right channel is the outer knob. Left
channel is the center knob.
C- MID FREQUENCY
Selects from five different mid frequency
equalization curves for both channels. Positions
one and two select curves that decrease the
amount of mid range loudness and positions
four and five select curves that increase the
amount of mid range loudness. Position three
is electrically flat.
D- HIGH FREQUENCY
Selects from five different high frequency
equalization curves for both channels. Positions
one and two select curves that decrease the
high frequency loudness and positions four
and five select curves that increase the high
frequency loudness. Position three is electrically
flat.
A
B
C
D
#038-601
BE012003
Loading...