McIntosh C-39 Brochure

mtlntosH

C 39...made in U.S.A.

C 39 AUDIO/VIDEO CONTROL CENTER

Remote Control For Two Areas

The Model C39 Audio/Video Control
center has built-in capability to con-
trol two separate areas. The Listen cir-
cuit corresponds to the Main area A,
and the Record circuit remote area B.

Dolby Pro Logic™Built-In

The Dolby Pro Logic™Surround
Sound decoder circuits are included

in the C39, together with the various

required outputs. The C39 will make
an excellent master AudioNideo con-
trol center for a Home Theater
system.

Interfaces With The CR 10

The C39 includes a connector to
allow it to interface with the CR10
Remote Control System. The C39
becomes the Main area and the CR10
allows four additional remote areas to
be added.

SPECIFICATIONS

Six Audio And Six AudiolVideo
Program Source Selections

PHONO/AUX, CD1, C02, TUNER,
TAPE1and TAPE2,(Audio only),
Satellite, TV, LV (Laser Vision), VCR1,
VCR2 and VIDEO/AUX, (Audio/Video),
are available for both Listen and
Record functions.

New Features

Front panel AudioNideo Camcorder
inputs are included. These inputs are
hidden behind a small front panel
with a motor driven cover. Other
features include Dolby Pro Logic™
Delay and Calibration controls, as well
as 13 serial data ports for accessories.
Balanced Output connectors are pro-
vided for the Main Outputs. Control
connectors for two CD players, Tuner
and SCR switcher are also included.

Familiar And Popular
Mcintosh Features

The popular Mcintosh designed

features include the Active Variable
Loudness Control, Bassand Treble
controls, area muting, signal processor
loop and switched outputs for addi-
tional power amplifiers.

Optional HC-1 Home Controller

The optional Mcintosh Model HC-1
Home Controller can be added to
allow control of other devices in the
home such as lights or a TV screen
motor.

Remote Accessories

An optional Model WK-1 wall
mounted keypad can be used in any
area to control the system. Up to four
IR sensors or keypads can be wired
on each remote circuit.

All Glass Front Panel

The "Classic Mcintosh" all glass front
panel has all nomenclature il-
luminated, including the push buttons.

PERFORMANCE LIMITS

FREQUENCY RESPONSE

+0, -05dB from 20Hz to 20,000Hz

RATED OUTPUT

25V at Main and Switched 1 and 2

Outputs

OUTPUT IMPEDANCE

Main, 600 ohms

MAXIMUM VOLTAGE OUTPUT

8V at Main and Switched 1 and 2

Outputs, from 20Hz to 20,000Hz

TOTAL HARMONIC DISTORTION

0.002%from 20Hz to 20,OOOHzat

rated output

SENSITIVITY

Phono: 2.5mV for 2.5V rated output,

(O.5VIHF)

High Level: 250mV for 2.5V rated

output, (50mV IHF)

SIGNAL TO NOISE RATIO

Phono: 90dB below 10mV input,

(84dB IHF)

High Level: 105dB below rated out-

put, (95dB IHF)

MAXIMUM INPUT SIGNAL

Phono: 90mV
High Level: 10V

INPUT IMPEDANCE

Phono: 47K ohms and 65pF

capacitance

High Level: 22K ohms

VOLTAGE GAIN

Phono to Tape: 40dB
Phono to Main: 60dB
High Level to .Tape:OdB
High Level to Main: 20dB

TONE CONTROLS

Bassand Treble variable, 12dB boost

to 12dB cut

AC POWER OUTLETS

One switched for area A power
amplifier, one switched for area B
amplifier and one unswitched

POWER REQUIREMENTS

120 volts,

50/60Hz,

25 watts

MECHANICAL INFORMATION

SIZE

Front panel measures 17
(445cm) wide, by 7
high. Depth behind mounting panel
including clearance for connectors is

15 1/2

inches (39.4cm). Knob clearance
required in front of the mounting
panel is 1

3/8

1/8

inches (35cm)

1/2

inches (18.1cm)

inches

FINISH

The front panel is glass with
Gold/Teal nomenclature illumination.
The chassis is black.

MciNTOSH LABORATORY INC.

2 CHAMBERS ST., BINGHAMTON, NY 13903·2699

607·723·3512