C-26
If You're in a Hurry
C-26
A- INPUT SELECTOR
AUX: Connects any source requiring flat
amplificalion plugged into AUX jacks on the
back panel
TAPE 1: Connects the output of a tape recorder
(with its own electronics) plugged into the
TAPE 1 jacks on the back panel to the C 26
input stages
TAPE 2: Connects the output of a second tape
recorder (with its own electronics) plugged
into the TAPE 2 jacks on the back panel in
the C 26 input stages
TUNER: Connects the output of a tuner
plugged into the TUNER jacks on the back
panel to the C 26 input stages
PHONO 1: Connects the output of a record
player
jacks on the back panel to the C 26
preamplifier stages
PHONO 2: Connects the output of a second
record player or turntable plugged into the
PHONO 2 jacks on the back panel to the C 26
preamplifier stages
B- MODE SELECTOR
For all stereo programs use the STEREO or
STEREO REVERSE positions. All other positions
are designed to handle monophonic programs.
C- VOLUME ON/OFF: Turns the AC power to the
C 26 on and adjusts loudness of sound to
suit your taste
to the C 26
or
turntable
input
plugged
stages
into
the
PHONO
1
D- TREBLE: The high frequency program material
is
modified
is the large knob, the left channel is the
small knob.
E- BASS: The low frequency program material is
modified to suit your taste. Right channel
is the large knob, the left channel is the
small knob.
F- BALANCE: Permits the adjustment for unequal
sound caused by room acoustics or program
material.
the other.
G- LOUDNESS: Frequency response is adjusted as
volume is reduced to compensate for
hearing losses at low volumes
H- HEADPHONES: Plug in a sel of low impedance
stereo headphones.
I- PUSH BUTTONS
MAIN: (speakers when properly connected in
the back
Out—MAIN speakers ON
REMOTE: Push in—REMOTE speakers OFF,
Out—REMOTE speakers ON
HF: Push in — High frequencies are reduced to
suppress unwanted noise. Out — flat
response
LF: Push in— Low frequencies are reduced to
suppress unwanted rumble: Out — flat
response
TAPE 1: Push in Monitor the program being
recorded on TAPE recorder 1: Out — Hear
the program recorded on TAPE recorder 1
TAPE 2: Push in — Monitor the program begin
recorded on TAPE recorder 2: Out — Hear
the program recorded on TAPE recorder 2
to
One
panel)
Suit
your
taste.
speaker
is
made
Push in—MAIN speakers OFF,
Right
louder
channel
than
038-476
Loading...