Marantz SR-6200 Sevice Bulletin

Date:
15-May-2003
Model:
Page:
Int.ref:
SERVICE BULLETIN
Subject:
1/2 REF.NBR: MZ02-033
Circulation: Application:
x for information
customer complaint in case of service
See below
mandatory
[ PHENOMENON]
Hum noise can be heard from Headphone out
[REASONS]
Caused by ground loop of the headphone out.
[SOLUTION]
Please apply the following solution.
Hum noise can be heard from Headphone out.
Cut a jumper J118
Main PCB
Connect the GND (at J118) to the chassis by the earth rug.
Approved by H.TAMURA Written by K.ONO
[REMARKS]
This solution has already been applied in the production after the serial numbers below.
SR5200/N2B MZ020149006031 and after SR5200/N2G MZ020149004426 and after SR5200/U2B MZ020149003041 and after SR5200/K2G MZ020149003041 and after
SR6200/N2B MZ020149003531 and after SR6200/N2G MZ020150002446 and after SR6200/U2B MZ020149004311 and after SR6200/K2G MZ020150001666 and after
SR7200/N2B MZ010148002426 and after SR7200/N2G MZ010148002781 and after SR7200/U2B MZ010148008211 and after SR7200/K2G MZ010149000681 and after
MZ02-033 Page 2/2
Approved by H.TAMURA Written by K.ONO
Date:
15-May-2003
Model:
SR5200/SR6200/SR7200
Page:
Int.ref:
SERVICE BULLETIN
1/6 REF.NBR: MZ02-032
Subject:
Circulation: Application:
Pop noise
x for information
customer complaint in case of service
See below
mandatory
[ PHENOMENON]
Pop noise appears when stop playing or track skip on CD playback with Digital connection. Pop noise appears in the condition of the Main volume is changed 74dB to 75dB(Mute) .
[SOLUTION]
Please apply the modifications as mentioned in page 2 to page 6.
[Caution] Modifications are deferent with version of the P.C.Board. Please confirm the version of the P.C.Board
* Version 1 P.C.Board (7020 06076 001-0) : Please apply the modification mentioned on Page2 to 4. * Version 2 P.C.Board (7020 06076 001-3) : Please apply the modification mentioned on Page5 to 6.
[REMARKS]
This solution has already been applied in the production after the serial numbers below.
SR5200/N2B MZ020149006031 and after SR5200/N2G MZ020149004426 and after SR5200/U2B MZ020149003041 and after SR5200/K2G MZ020149003041 and after
SR6200/N2B MZ020149003531 and after SR6200/N2G MZ020150002446 and after SR6200/U2B MZ020149004311 and after SR6200/K2G MZ020150001666 and after
SR7200/N2B MZ010148002426 and after SR7200/N2G MZ010148002781 and after SR7200/U2B MZ010148008211 and after SR7200/K2G MZ010149000681 and after
Approved by H.TAMURA Written by K.ONO
MZ02-032 Page 2/6
* Version 1 P.C.Board (7020 06076 001-0) : Please apply the modification mentioned below (Page2 to 4).
Version1 P.C.B.
Replace R582 (7 pcs) 470k ohm to 68k ohm (Parts #: NN05683610).
Replace R549 (7pcs) 470k ohm to 100k ohm (Parts #: NN05104610).
Approved by H.TAMURA Written by K.ONO
Replace/change the condenser C502 (7pcs) 100pF to the resister 100k ohm (Parts #: NN05104610)
MZ02-032 Page 3/6
Remove R543/R544/R545/R546/R547 and C505.
Approved by H.TAMURA Written by K.ONO
Loading...
+ 10 hidden pages