Marantz PM-6010-F Service Manual

Service
PM6010F /N1B, /N1G, /T1B
Manual
PHONO TUNER
POWER ON/OFF
SECTION PAGE
1. TECHNICAL SPECIFICATIONS ................................................................................................................. 1
3. IDLING CURRENT ADJUSTMENT ............................................................................................................. 2
4. BLOCK DIAGRAM ....................................................................................................................................... 2
5. WIRING DIAGRAM ..................................................................................................................................... 3
6. SCHEMATIC DIAGRAM AND PARTS LOCATION (Pattern Side) ............................................................. 5
8. ELECTRICAL PARTS LIST ....................................................................................................................... 16
Integrated amplifier
INTEGRATED AMPLIFIER PM6010OSE
CD
AUX
INPUT SELECTOR VOLUME
PHONES
TAPE CD-R/MD
TAPE CD-R/MD
ON
OFF
TABLE OF CONTENTS
COPY
CD-R>TAPE
MUTE
SOURCE DIRECT
ON
ON
OFF
OFF
MIN MAX
LR
BALANCE
PM6010OSE
Please use this service manual with referring to the user guide (D.F.U) without fail.
- PM6010OSE -
R
275W855010 MIT 3120 785 22009 First Issue 1999.08
MARANTZ DESIGN AND SERVICE
MARANTZ AMERICA, INC.
Using superior design and selected high grade components, MARANTZ company has created the ultimate in stereo sound. Only original MARANTZ parts can insure that your MARANTZ product will continue to perform to the specifications for which it is famous. Parts for your
MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS :
Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified. The following information must be supplied to eliminate delays in processing your order :
1. Complete address
2. Complete part numbers and quantities required
3. Description of parts
4. Model number for which part is required
5. Way of shipment
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.
USA
MARANTZ AMERICA, INC 440 MEDINAH ROAD ROSELLE, ILLINOIS 60172 USA PHONE : 630 - 307 - 3100 FAX : 630 - 307 - 2687
AMERICAS
SUPERSCOPE TECHNOLOGIES, INC. MARANTZ PROFESSIONAL PRODUCTS 2640 WHITE OAK CIRCLE, SUITE A AURORA, ILLINOIS 60504 USA PHONE : 630 - 820 - 4800 FAX : 630 - 820 - 8103
AUSTRALIA
JAMO AUSTRALIA PTY LTD 1 EXPO COURT, P.O. BOX 350 MT. WAVERLEY VIC 3149 AUSTRALIA PHONE : +61 - 3 - 9543 - 1522 FAX : +61 - 3 - 9543 - 3677
EUROPE / TRADING
MARANTZ EUROPE B.V. P.O.BOX 80002, BUILDING SFF2 5600 JB EINDHOVEN THE NETHERLANDS PHONE : +31 - 40 - 2732241 FAX : +31 - 40 - 2735578
CANADA
LENBROOK INDUSTRIES LIMITED 633 GRANITE COURT, PICKERING, ONTARIO L1W 3K1 CANADA PHONE : 905 - 831 - 6333 FAX : 905 - 831 - 6936
THAILAND
MRZ STANDARD CO.,LTD 746 - 754 MAHACHAI ROAD., WANGBURAPAPIROM, PHRANAKORN, BANGKOK, 10200 THAILAND PHONE : +66 - 2 - 222 9181 FAX : +66 - 2 - 224 6795
TAIWAN
PAI- YUING CO., LTD. 6 TH FL NO, 148 SUNG KIANG ROAD, TAIPEI, 10429, TAIWAN R.O.C. PHONE : +886 - 2 - 25221304 FAX : +886 - 2 - 25630415
BRAZIL
MARANTZ BRAZIL CAIXA POSTAL 21462 CEP 04698-970 SAO PAULO, SP, BRAZIL PHONE : 0800 - 123123 FAX : +55 11 534. 8988
(Discagem Direta Gratuita)
SINGAPORE
WO KEE HONG (S) PTE LTD WO KEE HONG CENTRE NO.23, LORONG 8, TOA PAYOH SINGAPORE 319257 PHONE : +65 2544555 FAX : +65 2502213
MALAYSIA
WO KEE HONG ELECTRONICS SDN. BHD. NO. 102 JALAN SS 21/35, DAMANSARA UTAMA, 47400 PETALING JAYA SELANGOR DARUL EHSAN, MALAYSIA PHONE : +60 3 - 7184666 FAX : +60 3 - 7173828
JAPAN
Technical
MARANTZ JAPAN, INC. 35- 1, 7- CHOME, SAGAMIONO SAGAMIHARA - SHI, KANAGAWA JAPAN 228-8505 PHONE : +81 42 748 1013 FAX : +81 42 748 9190
KOREA
MK ENTERPRISES LTD. ROOM 604/605, ELECTRO-OFFICETEL, 16-58, 3GA, HANGANG-RO, YONGSAN-KU, SEOUL KOREA PHONE : +822 - 3232 - 155 FAX : +822 - 3232 - 154
SHOCK, FIRE HAZARD SERVICE TEST :
CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary AC
cord connector pins ( with unit NOT connected to AC mains and its Power switch ON ), and the face or Front Panel of product and controls and chassis bottom. Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied, and verified before it is return to the user/customer. Ref. UL Standard No. 1492.
In case of difficulties, do not hesitate to contact the Technical Department at above mentioned address.
990729MIT
1. TECHNICAL SPECIFICATIONS
Power output
RMS 8 Ohms ........................................................................................................................................................... 50 W
DIN 8 Ohms ............................................................................................................................................................ 55 W
IHF dynamic power
8 Ohms ................................................................................................................................................................... 80 W
THD at 8 Ohms rated output.............................................................................................................................. 0.008 %
Intermodulation distortion .................................................................................................................................. 0.008 %
Damping factor .......................................................................................................................................................... 100
Magnetic cartridge input
Input sensitivity inpedance.................................................................................................................... 2.5 mV/47 kOhm
Accuracy of frequency response to IEC RIAA ...................................................................................................... 0.5 dB
Signal to noise ratio (IHF A weighted) ................................................................................................................... 87 dB
Tuner/CD/Aux/Tape inputs
Input sensitivity impedance.................................................................................................................. 150 mV/33 kOhm
Signal to noise ratio (A weighted) .......................................................................................................................... 97 dB
Frequency response (-3 dB limits) .............................................................................................................. 5 Hz -70 kHz
Channel separation (1 kHz/10 kHz) .................................................................................................................. 85/65 dB
General
Power Requirements ............................................................................................................................ 230 V AC, 50 Hz
Dimensions (MAX)
Width ............................................................................................................................................................. 440 mm
Height ............................................................................................................................................................ 138 mm
Depth ............................................................................................................................................................ 338 mm
Weight
Unit alone ......................................................................................................................................................... 6.7 kg
Specifications subject to change without prior notice.
2. TEST EQUIPMENT REQUIRED FOR SERVICING
Item Use
Distortion Analyzer Distortion measurements
Audio Oscillator Sinewave and squarewave signal source
AC VTVM Voltage measurements (AC)
Oscilloscope Waveform analysis and trouble shooting and ASO alignment
DC VTVM Voltage measurements (DC)
AC Wattmeter Monitors primary power to amplifier
Line Voltmeter Monitors potential of primary power to amplifier
Variable Autotransformer Adjusts level of primary power to amplifier
Circuit Tester Trouble shooting
Shorting Plug Shorts amplifier input to eliminate noise pickup
1
3. IDLING CURRENT ADJUSTMENT
1. Before switching the power ON, set the master volume control to the minimum position and the balance volume to the center positions. Also set semi-fixed resistors R755(L ch) and R756(R ch) on PCB P701 to the center positions.
2. Each of the cement resistors R767(L ch) and R768(R ch) on the PCB P701 is provided with three test points. Connect a digital voltmeter, set for the DC voltage input, to the test points at the two extremities of the three test points of R767 or R768.
3. After the setup above, switch the power ON, and adjust semi-fixed resistors R755(L ch) and R756(R ch) on PCB P701 according to the digital voltmeter reading. The target setting value is 10 mV(50 mA) for both the L ch and R ch.
Please refer to the table below.
Elapsed time Idling current after Mains ON setting value
30 sec. - 1 min. 3 ± 1 mV 1 min. - 2 min. 6 ± 1 mV 2 min. - 4 min. 8 ± 1 mV More than 5 min. 10 ± 2 mV
Measurement point
R767 / R768
4. BLOCK DIAGRAM
2
5. WIRING DIAGRAM
3 4
Loading...
+ 10 hidden pages