Marantz PM 14S1 User Manual
PM-14S1
PREMIUM INTEGRATED STEREO AMPLIFIER
Available in black or champagne colour, the new 14 Series features an
entirely new pre-amp design and represents a quantum leap forward in
performance.
This is the epitome of extreme quality and is, quite simply, a masterpiece.
As you would expect from such an elite amp, it includes exceptionalquality components such as Toroidal transformer and subsystems
throughout its construction. In addition, it incorporates improved
customized components, Marantz own developed HDAMs and the use of
a more efficient electrical signal path. These elevate the audio quality to
an even more sublime level. The PM-14S1 also comes with a new remote
controller, which features a stylish black anodized aluminium top, and
which can also control the SA-14S1 Player. The final touch of elegance is
supplied by the special Marantz-made solid copper speaker terminals, for
effortless and powerful signalling to your loudspeakers. This is luxury to
the extreme.
Main Features
• 2x 90Watts (8 ohm) / 2x 140 Watts (4 ohm)
• HDAM & Current feedback Amp of Marantz Unique
technology for High Quality Sound
• Current feedback amplifier provides wide range, very fast
and accurate signal handling
• Marantz proprietary HDAM
• Strong power supply with high current type schottky diode
• Marantz original solid pure copper speaker terminals
SPKT-100
• High quality Linear Control Volume Dual circuit
• CCFB (Constant Current Feedback) MM/MC phono
equalizer with V/I servo
• Toroidal Transformer, rigid premium chassis,
Low Noise LCD display
• Power Amp Direct input for easy integration in an AV setup
EAN
EU PM14S1/N1B 4951035051382 Black
PM14S1/N1SG 4951035051375 Gold
UK PM14S1/T1B 4951035051382 Black
PM14S1/T1SG 4951035051375 Gold
®
SA3 circuits
www.marantz.eu
PM-14S1
PREMIUM INTEGRATED STEREO AMPLIFIER
FEATURES PM-14S1
Channels 2
Current Feedback Topology •
Phono EQ: Constant Current Feedback •
HDAM version SA3, SA2
Power Transformer: Toroidal •
High Grade Audio Components •
Customised Components •
Symmetric PCB Layout •
Aluminium extrusion heat sink •
Balance / Bass / Treble •/•/•
OTHERS
Linear Drive Power Supply •
Liniear volume control •
BI-AMP and Multichannel option •
Shottky diodes •
Input buffer amp •
Solid Heat Sinks •(Separate)
System block shielding: metal •
Double Layer Bottom Plate •
Low noise LCD display •
Source Direct •
Power Amp direct •
Standby Mode •
INPUTS/OUTPUTS
Audio Inputs 6
Phono Input: MM / MC •/•
Audio Outputs 2
Pre-out 1
Power Amp Direct IN •
Gold Plated Cinch •
Speaker Terminals: Marantz SPKT-100
Number of terminals 2
D-Bus •
Floating Control Bus (3.5 mm mono jack x 2) •
Headphone Out •
SPECIFICATIONS
Power Output (8 / 4 Ohm RMS) 90 W / 140 W
Frequency Response 5 Hz - 100kHz
Total Harmonic Distortion 0.02 %
Damping Factor 100
Input Sensitivity: MM 2.7 mV / 47 kohm
Input Sensitivity: MC 270 µV / 100 ohm
Signal to Noise Ratio: MM/MC 86 dB / 75 dB
Input Sensitivity: High level 240 mV / 20 kohm
Signal to Noise Ratio: High level 106dB (2V input)
Input Sensitivity: Power Amp Direct IN 1,7 V / 20 kohm
Signal to Noise Ratio: Power Amp Direct IN 125 dB
GENERAL
Available colors: Gold / Black •/•
Metal Front Panel •
Power Consumption 220 W
Standby Consumption 0,2 W
Auto Power off •
Detachable Power Cable •
Remote Control RC001PMSA
System Remote Function •
Maximum Dimensions (W x D x H) 440 x 453 x 123 mm
Weight 18.5 kg
Design and specifications are subject to change by Marantz without notice.
www.marantz.eu
|V01|
Loading...