Marantz DV-12-S-2 Sevice Bulletin

SERVICE BULLETIN
[PHENOMENON]
1. In condition, Connect COMPONENT VIDEO OUT terminal to TV’s Component video input terminal.
2. When Playback DVD disc, a noise (horizontal line) occurs on TV screen with PAL Progressive output.
3. It occurs about 3 times in 2 hours.
[REASONS]
When transmission of 12C Bus data between Video Encoder and u-P, Video Encoder is incorrect operation by the noise.
[SOLUTION]
1. POS.NO RG04, RG05 CHIP RESISTOR (0 OHM) is changed to CHIP RESISTOR( 100 OHM) on the PM01-VIDEO / SACD CIRCUIT BOAD.
[NECESSARY PART]
POS.NO. RG04, RG05 00MNN05101610
[REMARKS]
The production of DV-12S2 has been finished.
See below
(100 OHM +-5% 1/16W)
Date: 20-Dec-2004 Model: DV-12S2
Page: 1 / 1 REF.NBR: MZ04-084
Subject:
A noise (horizontal line) occurs on TV screen
when PAL Progressive output.
Int.ref:
Approved by N.Sensui Written by S.NAGAO
WQ-19 2 817
/additional rule 3 (1st Issue 2003-03-19)
Loading...