100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : MZ13-132
Date:
January 2, 2014
_____________________________________________________________
Model:
NR1603, SR7008, SR6008, SR5008, NR1604, NR1504
AV8801, AV7701, SR7007, SR6007,
Subject: Information on the method of deleting the ID/Password of network
contents.
This is Information.
Cause:
Because the network device IC (DM860) manages ID/Password of the network
contents, even if the main microprocessor is initialized the ID/Password is not
deleted.
Symptom:
ID/password information.
Resetting the microprocessor does not remove Pandora
Solution:
procedure when the deletion of ID/Password of the network contents is
necessary
Log out the network contents.
Example: Log out of Pandora on the AV-8801.
1) Select Pandora as the NETWORK Source then push the "ENTER" button.
2) Push "Return" if the list of Pandora is displayed.
3) Sign out by selecting "Yes" if the log out was displayed by Popup window.
Note: Because the log out method is different for each content service, please
follow the method of Sign Out for each content service.
Please initialize the network device according to the following
______________________________________________________________________________________
The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or
loss resulting from the misuse of the information contained in this document.
CONFIDENTIALITY NOTICE:
Initialize the network module.
1) Select the NETWORK Source.
2) Push the following button of the main unit for three seconds or more, and
release the button if "Initializing…" is displayed in the FL tube.
FY12 Model
AV8801: "ENTER" and "BACK"
AV7701: "ENTER" and "BACK"
SR7007: "ENTER" and "BACK"
SR6007: "PRESET CH -" and "DISPLAY"
SR5007: "PRESET CH -" and "DISPLAY"
NR1603: "ZONE2 SOURCE" and "DISPLAY"
FY13 Model
SR7008: "ENTER" and "BACK"
SR6008: "PRESET CH -" and "DISPLAY"
SR5008: "PRESET CH -" and "DISPLAY"
NR1604: "ZONE2 SOURCE" and "DISPLAY"
NR1504: "PRESET CH -" and "DISPLAY"
3) Wait until "Completed" is displayed in the FL tube.
Execute factory reset.
1) Place the product into standby mode. (ZONE is also off.)
2) Turn power the product ON while pushing the following button on the
Main unit.
FY12 Model
AV8801: "MOVIE" and "MUSIC"
AV7701: "MOVIE" and "MUSIC"
SR7007: "MOVIE" and "MUSIC"
SR6007: "PRESET CH -" and "PRESET CH +"
SR5007: "PRESET CH -" and "RESET CH +"
NR1603: "ZONE2 SOURCE" and "INTERNET RADIO"
FY13 Model
SR7008: "MOVIE" and "MUSIC"
SR6008: "PRESET CH -" and "PRESET CH +"
SR5008: "PRESET CH -" and "PRESET CH +"
NR1604: "ZONE2 SOURCE" and "INTERNET RADIO"
NR1504: "PRESET CH -" and "PRESET CH +"
3) Once the display starts flashing at intervals of about 1 second, release the
two buttons.
______________________________________________________________________________________
The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or
loss resulting from the misuse of the information contained in this document.
CONFIDENTIALITY NOTICE: