Logitech 930-000131 User Manual

Getting Started Guide

Logitech HD 200a Powerline Starter Kit

System Requirements

& Support Guide

HD Powerline 200a

Logitech

Networking Starter Kit

Quick-start

guide

HD Powerline 200

Logitech

Networking Adapter

Welcome.

Thank you for purchasing Logitech HD Powerline products. With Logitech powerline home products you can easily network devices in your home using your home’s existing electrical wiring. No new wires to run, no networking hassles.

Power-strip Warning!

Do NOT plug the network adapter into a surge protector or power strip as they interfere with network communication. The network adapter(s) must be plugged directly into your wall outlet. Surge protectors are built-in to the network adapter and protect your devices.

Logitech HD 200a Powerline Starter Kit

1) Plug one end of the Ethernet cable connector into the network adapter.

1a) Add the optional wall spacer.

1b) Plug the network adapter into the power outlet.

2) Connect the other end of the Ethernet cable connector into an open port on your router.

INTERNET

1) Take the second network adapter and plug one end of the Ethernet cable connector into the network adapter.

1a) Add the optional wall spacer.

1b) Plug the second network adapter into the power outlet by the device you will be connecting to.

2) Connect the other end of the Ethernet cable connector into the ethernet port of your device (i.e. gaming console, laptop, etc.).

Turn the device on and test.

(not included)

Logitech HD 200a Powerline Starter Kit

2 Network adapters 2 Ethernet cables

2 wall spacers Documentation

Off

Network Floor Plan

OFF ON

LED

Logitech HD 200a Powerline Starter Kit

LED Status Section

Network Adapter Diagnostic LEDs What do these LEDs tell me?

Network Status LEDs

What do these LEDs tell me?

LED On/O Toggle Switch

How do I turn the LEDs o?

Software and advanced conguration

Logitech HD Powerline products come with 128 bit encryption to secure the powerline network. To congure your network with advanced network security, please download the Logitech Powerline Utility software at www.Logitech.com > Suppport > Downloads.

Customer Support

1.888.469.4543 [U.S.]

Logitech HD 200 Powerline Adapter

(sold separately)

Logitech HD 200 Powerline Adapter

(sold separately)

Powerline adapters use existing wall wiring

[Green] Trac and data is owing

[Yellow] Connection with Ethernet/LAN

[Green] Adapter getting power

[Blue] Network trac is owing

Use the switch on the side of the network adapter to disable the diagnostic and status LEDs.

www.logitech.com

© 2010 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech® assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

620-003174.003