Linksys SR224G User Manual
High-speed 10/100 Switching with integrated Gigabit and fiber
expandability
It features non-blocking, wire-speed switching that
forwards packets as fast as your network can deliver
them. Also included are Address Learning and Aging to
prevent data transfer errors and Data Flow Control to help
prevent packet collisions. The switch provides broadcast
storm suppression, and supports hardware MAC and IP
address learning.
All ports have automatic MDI/MDI-X crossover detection,
so you don't have to worry about the cable type. Each
port independently and automatically negotiates for best
speed and whether to run in half- or full-duplex mode.
This new Linksys rackmount switch delivers nonblocking, wire speed switching for your 10, and 100
megabit network clients, plus multiple options for
connecting to your network backbone. Twenty-four 10/
100 ports wire up your workstations, while the integrated
10/100/1000BaseTX port connects to the backbone at
Gigabit speeds. And the mini GBIC port allows future
expansion to alternate transmission media like optical
fiber.
Head-of-line blocking prevention keeps your high-speed
clients from bogging down in lower-speed traffic and fast
store-and-forward switching prevents damaged packets
from being passed on into the network.
No matter how intensive your network demands, the
Linksys 24-Port 10/100 + 2-Port Gigabit Switch + 2
miniGBIC has speed, flexibility, and reliability that you can
count on.
24 autosensing 10/100 full
duplex, auto MDI/MDI-X ports
Two Gigabit (10/100/
1000BaseTX) MDI/MDI-X port,
and two mini GBIC expansion
port
Address Learning and Data Flow
Control for transmission
reliability
Linksys reliability and limited
lifetime warranty
24-Port 10/100 + 2-Port Gigabit Switch
WIRED
+ 2 MiniGBIC
Model SR224G
Product Data
24-Port 10/100 + 2-Port Gigabit Switch
+ 2 MiniGBIC
Features
• Ideal for Integrating Your 10BaseT and
100BaseTX Network Hardware
• 24 10/100 Ports Provide Dedicated
Bandwidth in Half or Full-Duplex Modes
• 2 Gigabit Ethernet Port and 1 Mini-GBIC
Slot for Gigabit Fiber expansion
• Each port supports Auto MDI/MDI-X cable
detection
• Compatible with All Major Network
Operating Systems
• Advanced Store-and-Forward Packet
Switching Optimizes Data Transfers
• Auto Partitioning Protects PCs from
Downed Network Lines
• Signal Regeneration Ensures Data Transfer
Integrity
• Free Technical Support—24 Hours a Day,
7 Days a Week, Toll-Free US Calls
• Limited Lifetime Warranty
Specifications
Model SR224G
Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab
Ports 24 10/100 Ports, 2 10/100/1000 Port, and 2 mini-GBIC Port
Buttons NA
Cabling Type Cat5, and Multi-Mode fiber 1310 nm, and 850 nm supported
LEDs 1-24, G1, G2
Environmental
Dimensions 432 x 44.5 x 208 mm (17.01 x 1.75 x 8.20 in)
Weight 6.17 lb (2.8 kg)
Power 110-120V AC, 30W
Certification FCC Class B, CE
Operating Temp. 0ºC to 50ºC (32ºF to 122ºF)
Storage Temp. -40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity 20% to 95% relative humidity, Non-Condensing
Storage Humidity 5% to 95% Non-Condensing
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA 92612 USA
E-mail: sales@linksys.com
support@linksys.com
Web: http://www.linksys.com
Linksys products are available in more than 50 countries, supported
by 12 Linksys Regional Offices throughout the world. For a complete
list of local Linksys Sales and Technical Support contacts, visit our
Worldwide Web Site at www.linksys.com.
Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are
trademarks or registered trademarks of their respective holders.
SR224G-DS-60210NC BW
Package Contents
• One SR224G 24-Port 10/100 + 2-Port Gigabit
Switch + 2 MiniGBIC
• One Printed User Guide
• One AC Power Cord
• One Registration Card
Model
SR224G
Loading...