Ethernet switch with 24-port 10/100,
4 10/100/1000 ports, and PoE and
SFE2000P
stacking
SFE2000P is optimized for maximizing the system availability with fully redundant
Stacking, Redundant Power options, and Dual Images for resilient firmware upgrades.
The SFE2000P is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X
port authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based filtering.
The enhanced QoS and traffic management features ensure clear and reliable voice and
video communications
For Wireless or VoIP deployments, the SFE2000P supports the IEEE802.3af standard for
Power over Ethernet (PoE). With automatic load sensing, the power control circuitry
automatically detects PoE on the end-device before providing power. For safety, each port
has independent overload and short-circuit protection, along with LED indicators for power
status. A maximum of 15.4W is available on the FE ports for powering PoE enabled wireless
AP or VoIP handsets, with a maximum per device PoE delivery of 185 Watts available for all
ports.
SFE2000P switches provide an intuitive, secure management interface enabling you to better
utilize the comprehensive feature-set of the SFE2000P, resulting in a better optimized, more
secure network.
Linksys Business Series SFE and SGE Stackable switch products are Linksys One Ready. That
means they include the necessary firmware to be seamlessly integrated into a Linksys One data
or data/voice network. Once connected, a Linksys One Service Router will discover the SFE/SGE
device, automatically configure it and make it available to other users on the network. Linksys One
technology is automatic and self-configuring. When Linksys One Voice Gateways, IP Phones and
other Linksys One peripherals are connected to a Linksys One Ready Ethernet switch’s ports, small
businesses are ready to communicate in a matter of minutes.
Fully resilient stacking
provides optimized
growth with simplified
management
Provides IEEE 802.3af
PoE power to IP phones,
cameras, or APs
Maximum security and
control of traffic with
policing, shaping, ACLs,
and QoS
24-Port 10/100 Ethernet
Switch with PoE
Model: SFE2000P
Linksys One Ready - simple,
automated installation
with Linksys One Services
Routers present
PRODUCT DATA
BUSINESS SERIES
Features
24 10/100 Ethernet ports + 4
•
10/100/100 Copper ports
2 miniGBIC slots (shared
•
with 2 copper ports) for
Fiber Gigabit Ethernet
expansion
IEEE 802.3af PoE on
•
delivered over any of the 24
10/100 ports
A maximum of 15.4W is
•
available on the FE ports
for powering PoE enabled
wireless AP or VoIP handsets,
with a maximum per device
PoE delivery of 185 Watt
available for all ports
Dual images for resilient
•
firmware upgrades
12.8 Gbps, Non-blocking,
•
Store-and-Forward
switching capacity
Simplified QoS management
•
using 802.1p, Diffserv or
ToS traffic prioritization
specifications
Power redundancy when
•
used with Linksys Business
Series Redundant Power
Supply unit
Fully resilient stacking
•
provides optimized growth
with simplified management
Access Control Lists (ACL) for
•
granular security and QoS
implementation
Management enables
•
configuration and
monitoring from a standard
web browser
Secure remote management
•
of the switch via SSH and
SSL encryption
PRODUCT DATA
BUSINESS SERIES
24-Port 10/100 Ethernet Switch with PoE
Specifications
Model SFE2000P 24-port 10/ 100 Ethernet Switch with PoE
Ports 24 RJ-45 connectors for 10BASE-T/100BASE-TX +
4 10BASE-T/100BASE-TX/1000Base-T with 2 Gigabit combo ports
shared between miniGBIC ports
Console port
Auto MDI/MDI-X
Autonegotiate/Manual setting
RPS port for connecting to Redundant Power Supply unit
Buttons Reset Button
Cabling Type UTP CAT 5 or better for 10BASE-T/100BASE-TX,
UTP CAT 5e or better for 1000BASE-T
LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8
POE
IEEE 802.3af PoE on delivered over any of the 24 10/100 ports
Power budget allows for max power of 15.4W on
up to 12 ports simultaneously
Performance
Switching Capacity Up to 12.8 Gbps, non-blocking
Stacking
Stack Operation Up to 8 units in a stack (192 ports)
Hot Insertion and removal
Ring and Chain stacking options
Master and Backup master for resilient stack control
Auto-numbering or manual configuration of units in stack
Layer 2
MAC table size 8K
Number of VLANs 256 active VLANs (4096 range)
VLAN Port-based and 802.1Q Tag-based VLANs
Protocol-based VLAN
Management VLAN
Private VLAN Edge (PVE)
GVRP
HOL Blocking Head of line blocking prevention
Layer 3
Layer 3 options Static Routing
CIDR (Classless Interdomain Routing)
128 Static Routes
IPv4
Forwarding in silicon - Wirespeed forwarding of layer 3 traffic
Management
Web User Interface Built-in Web UI for easy browser-based configuration (HTTP/HTTPS)
SNMP SNMP version 1, 2c, 3 with support for traps
SNMP MIBs RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB,
RFC1493 Bridge MIB, RFC2674 Extended Bridge MIB (P-bridge, Q-bridge),
RFC2819 RMON MIB (groups 1,2,3,9 only), RFC2737 Entity MIB,
RFC 2618 RADIUS Client MIB RFC 1215 Traps
RMON Embedded Remote Monitoring (RMON) software agent supports
four RMON groups (history, statistics, alarms, and events) for enhanced
traffic management, monitoring, and analysis
Firmware Upgrade Web Browser upgrade (HTTP) and TFTP
Dual images for resilient firmware upgrades
Port Mirroring Traffic on a port can be mirrored to another port for analysis
with a network analyzer or RMON probe
Loading...