Linksys PLK200, PLE200 Quick Start Manual
1
Run the Setup Wizard
WIRED
Package Contents
• PowerLine AV Ethernet Adapter
• Start Here Folder
• Setup Wizard CD-ROM
•User Guide on CD-ROM
• Quick Installation
• Ethernet Cable
PowerLine AV
Ethernet Adapter
Quick Installation
A Go to your computer and
insert the Setup Wizard CDROM into the CD drive. The
Setup Wizard should run
automatically. If it does not,
click Start. Click Run, and in
the field that appears, enter
D:\setup.exe (if “D” is the
letter of your CD drive).
B On the Welcome screen,
click Setup to begin the
installation.
Other options include the
following:
• Click User Guide to view
the online User Guide.
• Click LINKSYS Web to visit
the Linksys website,
www.linksys.com.
• Click Exit to exit the Setup
Wizard.
C The End User License
Agreement screen will
appear. If you agree and
want to begin the
installation, click Next.
D The Preparing to Install
screen will appear briefly. If
you want to cancel the
installation, click the Cancel
button.
B
C
E Connect one end of an
Ethernet network cable to
the Ethernet port of the
Adapter. Connect the other
end to an Ethernet port on
your computer, which is
running the Setup Wizard.
Plug the Adapter into an
electrical outlet.
Then click Next.
Plugs Directly into Outlet
E
Connection to a Desktop Computer
IMPORTANT: Because the Adapter sends data over the powerlines of your
residence, Linksys recommends that you plug the Adapter directly into an electrical
outlet. The Adapter has its own power filter for protection against surges.
Model No.
Model No.
PLE200
D
2
Instructions for Connection
F The Install Configuration
Utility screen will appear.
(The Configuration Utility is a
program that manages
powerline devices.)
Wait a few minutes while the
Setup Wizard installs the
Configuration Utility. If you
want to cancel the
installation, click Exit.
G On the Congratulations
screen, click Online
Registration to register the
Adapter on
www.linksys.com/
registration.
To exit the Setup Wizard,
click Exit.
Proceed to the next section,
“Instructions for Connection.”
F
G
A If the Adapter is for the
computer it is already
connected to, then the
installation is complete. For
information about the
Configuration Utility, refer to
the User Guide on the Setup
Wizard CD-ROM.
If the Adapter is for a
different network device,
then proceed to step B.
B Disconnect the Ethernet
network cable from the
computer.
C Unplug the Adapter from its
electrical outlet.
D Connect the Ethernet
network cable to the
appropriate network
device.
E Plug the Adapter into an
electrical outlet.
IMPORTANT: Because the Adapter
sends data over the powerlines of
your residence, Linksys recommends
that you plug the Adapter directly into
an electrical outlet. The Adapter has
its own power filter for protection
against surges.
Congratulations! The installation
of the PowerLine AV Ethernet
Adapter is complete.
For information about the
Configuration Utility, refer to the
User Guide on the Setup Wizard
CD-ROM.
Plugs Directly into
Outlet
For additional information or troubleshooting
help, refer to the User Guide on the Setup
Wizard CD-ROM. You can also call or e-mail
for further support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
PLE200-QI-61117NC JL
Loading...