Linksys OGV200 User Manual
Quick Installati
on Guide
Package Contents
• Network Optimizer for Gaming and VoIP
• Power Adapter
• Ethernet Network Cable
•Quick Install
• User Guide on CD-ROM
• Registration Card
Network Optimizer
for Gaming and VoIP
Model
OGV200
Quick Installation
Install the Network Optimizer
1
Before you begin, make sure you have an
active Internet Connection, then follow the
steps below to install the Network
Optimizer.
for Gaming and VoIP
A Remove the Ethernet network
cable from your broadband modem
and connect it to the Network
Optimizer’s ROUTER port.
A
ROUTER Port
B Connect the included Ethernet
network cable to your broadband
modem, then connect the other end
to the Network Optimizer’s MODEM
port.
C Connect the power adapter to the
Network Optimizer’s power port, then
connect the other end to a standard
electrical outlet.
When the MODEM and ROUTER lights
begin to flash, about one minute, the
Network Optimizer is ready for use.
Congratulations, installation is complete.
B
C
MODEM Port
Power Port
For additional information or troubleshooting
help, refer to the User Guide on the Setup
Wizard CD-ROM. You can also e-mail for
further support.
24 Hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S. and
certain other countries. Copyright © 2006 Cisco
Systems, Inc. All rights reserved.
OGV200-QI-60525NC CB
Loading...