LINKSYS EA9200 Users Manual

USER GUIDE

EA

DUAL BAND GIGABIT Wi‑Fi ROUTER

Model#AC32 00

Linksys EA9200

Table of Contents

Product overview

EA9200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Setting Up Your E-Series Router

Where to find more help . . . . . . . . . . . . . . . . . . . . . . . . . .3

How to install your router . . . . . . . . . . . . . . . . . . . . . . . . .3

How to connect to Linksys Smart Wi-Fi 3
How to change router settings 3

Troubleshooting

Your router was not successfully set up . . . . . . . . . . . . . . . .7

Windows XP Service Pack update . . . . . . . . . . . . . . . . . . . .7

Your Internet cable is not plugged in message . . . . . . . . . . . . .8

Cannot access your router message. . . . . . . . . . . . . . . . . . . .8

Specifications

Linksys EA9200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

ii

ii

Linksys EA9200

Product overview

Product overview

EA9200

Back view

FPO

• Indicator light — The Linksys logo stays on steadily while power is

connected and following a successful Wi-Fi Protected Setup connection.
Flashes or pulses slowly during bootup, during firmware upgrades, and
during a Wi-Fi Protected Setup connection. Flashes quickly when there is
a Wi-Fi Protected Setup error.

• The LED is the backlit Linksys logo

Back view

FPO

The ports/buttons from left to right are: USB 3.0, USB LED, USB 2.0, USB LED,
Ethernet ports (1-4), Internet port, Power port, Power switch, Reset button

• USB ports — Connect and share a USB drive or a USB printer.

• USB LEDs — Illuminate when a USB drive is connected. Flash when data

is being transferred.

• Ethernet ports — Connect Ethernet cables to wired Ethernet network

devices.

NOTE

For best performance, use CAT5E or higher rated cables on the
Ethernet ports.

• Internet port — Connect an Ethernet cable to your modem.

• Power port — Connect the included AC power adapter.

• Power switch — Press | (on) to turn on the router.

• Reset button — Press and hold for 10 seconds (until the port lights flash

at the same time) to reset the router to factory defaults. You can also do
this using Linksys Smart Wi-Fi.

1

1

Linksys EA9200

Product overview

Side view

Top view

FPO

• Adjustable antenna ports — Three adjustable external antennas (included)

should be connected to the router before powering it on. Twist antenna
connectors clockwise onto ports.

FPO

• Wi-Fi Protected Setup™ button — Press to easily configure wireless security

on Wi-Fi Protected Setup-enabled network devices.

• Wi-Fi button — Press to disable the wireless networks (light comes on). Press

again to enable the wireless networks (light goes out).

2