Life Fitness FIT 1.0 CM User Manual

GYM SYSTEM
USER GUIDE
WARNING:
Read and follow all directions for each step to insure proper assembly of this product.
CLASS -S PART # 7946001 REV . A VERSION: FSFCM1-0102-001 DA TE: 06-13-05
j
TABLE OF CONTENTS
Safety Statement.............2
General Notes.................2
Gym Dimensions.............3
Components List.............4
Exploded View...............5
Tool Requirements
and Hardware.................6
Assembly Instructions.....7-18
General Maintenance.......19-20
Warranty Statement.........21
Contact Information........22
IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions on the use of this machine including the wall chart and instructional DVD. Use only for intended exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a broken or
ammed machine. Notify your authorized Life Fitness dealer before use and have repairs made by an authorized service technician.
5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure, call your authorized Life Fitness dealer.
6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in this condition. DO NOT attempt to fix. Notify your authorized Life Fitness dealer.
7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized Life Fitness dealer before use and have repairs made by an authorized service technician.
8. Make sure all spring loaded pull pins are fully engaged in the adjustment position before use.
9. Children and pets must not be allowed near this machine. Supervise teenagers.
Please note:
* Thank you for purchasing the Life Fitness Fit 1.0 CM Gym System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
* DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated.
NOTE: In a continual effort to improve our products, specifications are subject to change 2005 Life Fitness, a division of Brunswick Corporation. All rights reserved.
©
Life Fitness is a trademark of Brunswick Corporation
www.LifeFitness.com
2
GYM DIMENSIONS
3
COMPONENTS LIST
ITEM NO. QTY. PART NO . DESCRIPTION
1 1 LEA 77282 02 PTD ASSY, FRONT UPRIGHT 2 1 LEA 77016 02 PTD ASSY, BASE PLATFORM 3 1 LEA 77298 02 PTD ASSY, ROLLER PAD ADJ. 4 1 LEA 77017 02 PTD ASSY, LEFT UPRIGHT 5 1 LEA 77018 02 PTD ASSY, RIGHT UPRIGHT 6 1 LEA 76117 02 WLDMT, GUIDE ROD 7 1 LEA 77461 02 PTD ASSY, TOP PULLEYS 8 1 LEA 79459 02 PTD ASSY, FRONT SHROUD
9 1 LEA 77616 02 PTD ASSY, TOP SHROUD 10 1 LEA 77624 02 PTD ASSY, HEAD PLATE PULLEY 11 2 LEA 77545 02 PTD ASSY, FLOATING PULLEYS 12 1 LEA 79523 01 PTD ASSY, HEAD PLATE 20" GRAY 13 2 LEA 76820 02 PLA TE, REAR BOTTOM 14 1 LEA 76220 01 A SSY, SELECTOR PIN 15 1 LEA 77553 01 COVER TOP 16 1 LEA 77554 01 COVER TOP BACK 17 1 LEA 77555 01 COVER TOP FRONT 18 1 LEA 77556 01 COVER MID BACK 19 1 LEA 77557 01 COVER MID FRONT 20 1 LEAAK58-00245- 0000 MEDALLION;"BUG"; PUR 21 2 LEA 32455 01 COLLAR, 1" ID SHA FTALUM 22 2 LEA 69202 01 GUIDE ROD, 1" O.D. 10GA X 73 23 2 LEA 60206 02 BEARING, FLG 1/2 ID X 5/8 OD X 1/2 24 2 LEA 77497 01 CUSHION, WEIGHT STA CK 25 14 LEA 32234 01 SCREW, 10-32 X 6 PHL PAN TT ST BZ 26 10 LEA 32260 03 SCREW, 6-20 X 8 PHL PAN PLT BZ 27 4 LEA 32492 05 .375 HXS SOC CS X 1.00 28 28 LEA 31025 14 WASHER, 3/8 SAE 29 1 LEA 3102701 NUT, HEX 30 4 LEA 32454 01 BSHNG, GUIDE ROD 1 ID X 1-1/2 31 6 LEA 32492 03 .375 HXS SOC CS X .750 32 1 LEA 77054 02 SHAFT, .50 DIA SLOTTED X 1.67 33 7 LEA 31028 02 NUT, .375 - 16 NYLOCK 34 9 LEA 32492 14 .375 HXS SOC CS X 3.50 35 2 LEA 32492 11 .375 HXS SOC CS X 2.50 36 2 LEA 7749801 BUMPER, HEAD PLATE 37 6 SEE PG. 14 CABL E CONNECT ENDS
**
38 2 LEA 77456 01 SHORT HANDLE 39 2 LEA 77457 01 LONG HANDLE 40 2 LEA 77455 01 A DJUSTABLE HANDLE 41 1 LEA 77458 01 FOOT STRAP 42 2 LEA 7746001 GUIDE CABLE 43 1 LEA774 5402 UPPER CAB LE (SHORT) 44 2 LEA 7745401 LOWER CABLE (LONG) 45 1 LEA 79460 01 USER GUIDE 46 15 LEA 7951001 WEIGHT PLATE 47 2 LEA 77499 01 LA BELS 1-26 48 1 LEA 79594 01 PLA CA RD, FIT 1.0 CM UPPER EXEC. 49 1 LEA 79595 01 PLA CA RD, FIT 1.0 CM LOWER EXEC.
**SEE P AGE 13, FIGURE 7 FOR ADDITIONAL P AR T NUMBERS
4
EXPLODED VIEW
PLACARD PLACEMENT
SERIAL# (inside of cover)
SHROUD KIT
SERIAL #
5
HARDWARE:
REQUIRED TOOLS:
* 9/16” wrench * Ratchet and 9/16” socket * Adjustable wrench * T ape measure * T wo 5/16” Allen wrenches * 4 mm Allen wrench * 3/4 W rench
* Phillups Screw Driver
BOLT LENGTH
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
6
6
SECURLEY TIGHTEN
3/8 x 3/4
3/8 x 1”
3/8 x 3-1/2
FIGURE 1
STEP 1:
LOOSELY assemble bottom of the LEFT UPRIGHT (4) and RIGHT UPRIGHT (5) to FRONT UPRIGHT (1)
using four 3/8 x 3-1/2 BOLTS (34), eight 3/8 WASHERS (28) and four 3/8 NUTS (33) and TOP PULLEYS (7)
LOOSELY assemble the top of the LEFT UPRIGHT (4) and RIGHT UPRIGHT (5) to FRONT UPRIGHT (1)
and TOP PULLEYS (7), using four 3/8 x 1” BOLTS (27) for bottom four holes, two 3/8 x 3/4 BOLTS (31) for top two holes and six 3/8 WASHERS (28) as illustrated in FIGURE 1.
SECURLEY TIGHTEN ONLY THE UPP ER TWO 3/8 X 3/4” BOLTS
NOTE: THE TOP PULLEY WELDMENT ATTACHES TO THE INSIDE OF THE UPRIGHT SID ES AND THE ORIENTATION SHOULD BE SO THE ARROW POINTS FORWARD AS SHOWN
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
7
6
Loading...
+ 15 hidden pages