Life Fitness Exercise Bike Lifecycle 8500, Lifecycle 8500 Installation Instructions Manual

LIFE FITNESS EXERCISE BIKE

INSTALLATION INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS!

⇒ DO NOT locate the Lifecycle 8500 exercise bike outdoors, near swimming pools, or in areas

of high humidity.

⇒ DO NOT operate your Lifecycle 8500 bike if it has been dropped, damaged, or even partially

immersed in water. Contact Life Fitness Customer Support Services at the number on the
back page of this Installation Instruction Guide.

⇒ DO NOT locate the Lifecycle 8500 bike any closer than 30 inches ( 76 cm ) to a television set.
⇒ DO NOT locate additional Lifecycle 8500 exercise bikes any closer than a minimum of

42 inches ( 107 cm ) from center to center to avoid interference (cross talk) between Heart

Rate monitors.

⇒ DO keep the area around your Lifecycle 8500 bike clear of any obstructions, including walls

and furniture.

⇒ DO verify the contents of the delivery carton against the accompanying Parts List prior to

setting the cartons and shipping material aside. If any parts are missing, contact Life Fitness
Customer Support Services at the number listed in the Operation Manual. Save the shipping
cartons in case of return.

⇒ DO read the entire Operation Manual prior to attempting to operate this machine as this is

essential for proper use.

TOOLS REQUIRED FOR ASSEMBLY... Phillips screwdriver, 1/2” wrench

PARTS DESCRIPTION

STABILIZER/HANDLEBAR BOLT Qty: 5

1

0017-00101-1043
SEAT ASSEMBLY Qty: 1

3

AK18-00127-0002
HANDLEBAR ASSEMBLY Qty: 1

5

AK18-00168-0000
STABILIZER BAR Qty: 1

7

AK18-0070-0000

CONSOLE SCREW Qty: 4

2

0017-00101-0932
COLLAR Qty: 1

4

0K18-01156-0001
DISPLAY CONSOLE ASSEMBLY Qty: 1

6

AK17-00206-0001
9V ALKALINE BATTERY Qty: 1

8

0017-00003-0757